NonStop Servlets for JavaServer Pages (NSJSP) 7.0 System Administrator's Guide

Managing NSJSP
NonStop Servlets for JavaServer Pages (NSJSP) 7.0 System Administrator’s Guide—674372-005
4-52
NSJSP Manager Operations
The following message is displayed:
The operation will make the server class unavailable
for the user. Do you still want to stop the server
class?
3. Click OK.
The following message is displayed for Steps 3a and 3b:
Stop Initiated. The operation may take a few minutes to
complete.
The server class stops and you can no longer access any application running on the
server class.
Figure 4-26 shows the Server Class Operations page after stopping the server class
configured under the $ZLIN PATHMON.
Start the NSJSP Server Class
Using the NSJSP Manager application, you can start an NSJSP Server Class that is in
the STOPPED or THAWED state.
To start the NSJSP Server Class, complete the following steps:
1. Click the Server Class tab.
The System Information page appears.
2. Click the Server Class Operations.
Figure 4-26. Server Class with the $ZLIN PATHMON in the FROZEN State
WARNING. Wait for a minute or two for the operation to complete before performing any other
operation on the NSJSP Manager application interface. The time required for an operation to
complete depends on the number of requests serviced by the server class at the time of the
stop operation and the number of server class processes that are running.