NonStop Servlets for JavaServer Pages (NSJSP) 7.0 System Administrator's Guide

Managing NSJSP
NonStop Servlets for JavaServer Pages (NSJSP) 7.0 System Administrator’s Guide—674372-005
4-53
NSJSP Manager Operations
3. Perform one of the following steps depending on the number of PATHMONs
configured:
a. If the server class is configured on only one PATHMON, click Start.
b. If the server class is configured in a TS/MP Pathway domain, complete the
following steps:
1. Select the Pathmon Name, which has the server class to be started.
2. Click Start.
The following message is displayed for Steps 3a and 3b:
Start Initiated. The operation may take a few minutes to
complete.
Figure 4-27 shows the Server Class Operations page after starting the server class
configured under the $ZLIN PATHMON.
The server class starts and you can access only those applications that are running on
the server class.
Freeze the NSJSP Server Class
Using the NSJSP Manager application, you can freeze an NSJSP Server Class that is
in the RUNNING or THAWED state. After performing a FREEZE operation, no new links
will be assigned to the link manager, and the link manager will stop using the current
links.
To freeze the NSJSP Server Class, complete the following steps:
1. Click the Server Class tab.
The System Information page appears.
2. Click the Server Class Operations.
Figure 4-27. Server Class with the $ZLIN PATHMON in the RUNNING State