NonStop Servlets for JavaServer Pages (NSJSP) 7.0 System Administrator's Guide

Managing NSJSP
NonStop Servlets for JavaServer Pages (NSJSP) 7.0 System Administrator’s Guide—674372-005
4-125
Server Class Operations
The following output is displayed:
PATHMON : \POS02.$ZWEB
SERVER #RUNNING ERROR INFO
SCP1 2
PATHMON : \POS02.$YWEB
SERVER #RUNNING ERROR INFO
SCP1 2
To stop the SCP1 Server Class running under the $zweb PATHMON, enter the
following commands:
PDMI 3>> OPEN $zweb
= FREEZE SERVER SCP1
= STOP SERVER SCP1
After you enter the STOP SERVER command, the SCP1 Server Class’s processes
running under the $zweb PATHMON are stopped. To view the status of the SCP1
Server Class, enter the following commands:
PDMI 1>> OPEN $zweb,$yweb
PDMI 2>> STATUS SERVER SCP1
The following output is displayed:
PATHMON : \POS02.$ZWEB
SERVER #RUNNING ERROR INFO
SCP1 0
PATHMON : \POS02.$YWEB
SERVER #RUNNING ERROR INFO
SCP1 2
There are now only two SCP1 processes running under the $yweb PATHMON and
none under the $zweb PATHMON.
Note.

For information on the PDMCOM commands, see the TS/MP Release Supplement
Manual.

For information on the PATHCOM commands, see the TS/MP System Management
Manual.