NSM/web 3.1 Installation Guide (H06.23+, J06.12+)

Installation (T2806H31 and Superseding SPRs)
HP NonStop Release 3.1 NSM/web Installation Guide—663861-001
1-10
8. Enter the CPU Number for Servers
name must be of the form $ANNN where A is any letter and N is
any letter or digit.
ENTER the process name here or leave blank to use the current
value $ZNSM: $ZLOB
Checking for unused process name $ZLOB ...
Process $ZLOB is available.
8. Enter the CPU Number for Servers
Enter the CPU number to be used by the NSM/web servers, or leave it blank to use the
default. When started, the NSM/web installer identifies which processors are
configured (usually all of them) and which ones are running when the installer is run
(usually all the processors that have been installed):
Server CPU
==========
The cpu in which NSM/web servers are to run.
Your system has 16 CPUs configured although they may not all be
installed.
CPU 0 is running.
CPU 1 is running.
CPU 2 is running.
CPU 3 is running.
ENTER the cpu number here or leave blank to use the current
value 0: 2
9. Enter the Server Priority
Enter the server priority for the NSM/web servers, or leave it blank to use the default:
Server priority
===============
The cpu priority at which NSM/web servers are to run.
ENTER the priority here or leave blank to use the current value
160:
10. Enter the Home Terminal
Enter the server home terminal for the NSM/web servers and the PATHMON process.
If you do not enter a value, the default value is used:
Server home terminal
====================
The home terminal for NSM/web servers and PATHMON process.
It will not be used but must exist and be available for output.
ENTER the home terminal here or leave blank to use the current
value $ZHOME:
Checking for existing $ZHOME ...
Process $ZHOME exists.