NSM/web 3.1 Installation Guide (H06.23+, J06.12+)

Installation (T2806H31 and Superseding SPRs)
HP NonStop Release 3.1 NSM/web Installation Guide—663861-001
1-13
13. Enter the Base Process Prefix
Base TCP/IP port
================
NSM/web requires exclusive use of two consecutive TCP/IP ports.
These same ports will be used on all IP addresses on which
NSM/web is installed.
ENTER the lowest of the two consecutive port numbers here or
leave blank to use the current value 9500:
Checking 9500 on $ZTC0...
Checking 9501 on $ZTC0...
13. Enter the Base Process Prefix
Enter the NonStop CORBA Comm Server process name prefix alphabet (A - Z), or to
use the default, leave the field blank:
Base Process Prefix
===================
NSM/web requires exclusive use of a set of process names. These
processes will be named $<prefix>NC<postfix>. There will be one
for each IP address on which NSM/web is installed.
ENTER the first of the consecutive single LETTER prefixes here
or leave blank to use the current value X:
Checking postfix A, process $XNCA...
Postfix A is already in use.
Checking postfix B, process $XNCB...
14. Verify Your Entries
Verify the current configuration settings, and determine if you need to change the
entries:
CURRENT SETTINGS
================
OSS root directory : /usr/tandem/lobsterServers
Webserver root directory : /usr/tandem/webserver/root/lobster
Guardian subvol : /G/system/lobster
Pathmon name : $ZLOB
Server cpu : 2
Server priority : 160
Hometerm : $ZHOME
Base TCP/IP port : 9500
Base process prefix : X
Note. HP recommends that you avoid using the system process name prefix characters X, Y,
and Z.