NSM/web 3.1 Installation Guide (H06.23+, J06.12+)

Installation (Pre-T2806H31 SPRs)
HP NonStop Release 3.1 NSM/web Installation Guide—663861-001
2-6
9. Enter the Home Terminal
9. Enter the Home Terminal
Enter the server home terminal for the NSM/web servers and PATHMON process, or
leave it blank to use the default:
Home terminal
====================
The home terminal for NSM/web servers and PATHMON process.
It will not be used but must exist and be available for output.
ENTER the home terminal here or leave blank to use the current
value $ZHOME:
Checking for existing $ZHOME ...
Process $ZHOME exists.
10. Enter the NonStop TCP/IP Process Name
Enter the NonStop TCP/IP process name for the NSM/web server, or leave it blank to
use the default. This example specifies the TCP process name $ZTC0:
TCPIP process name
==================
Specifies your web server TCPIP process name.
ENTER the TCP process name here or leave blank to use the
current value $ZTC0 :
Checking for existing process $ZTC0 ...
Process $ZTC0 is running.
11. Enter the IP Address for Servers
Enter the IP address that the NSM/web servers use, or leave it blank to use the
default. This example uses the TCP process name $ZTC0 that was specified in Step
10:
IP Address
================
Specifies the IP address the NSM/web servers will use.
Must be a numeric IP address for $ZTC0. You may not use a DNS
name
ENTER the TCP process name here or leave blank to use the
current value 127.0.0.1 : 192.168.109.225
Checking $ZTC0 for IP address 192.168.109.225 ...
$ZTC0 has IP address 192.168.109.225.
CURRENT SETTINGS
================
OSS root directory : /usr/tandem/NSMweb/lobster
Webserver root directory :
/usr/tandem/webserver/root/NSMweb/lobster
Guardian subvol : /G/SYSTEM/lobster
Pathmon name : $ZLOB
Server cpu : 2