MX Release 3.1 (H06.23+, J06.12+)

Installation of the ODBC/MX Client

HP NonStop ODBC/MX Driver for Windows for SQL/MX Release 3.1—663858-001

2-2

Step 1: Download and Run the Installation File

1. Turn off all other applications running on the client workstation.

2. Create a temporary client installation folder on the client workstation; for example:

C:\ODBCTEMP. This creates a space in which to download the installation file and

makes it easier to delete when you are finished with the installation.

3. From the client workstation, use FTP to download the TDMODBC file for 32-bit

driver or the NSODBC64 for 64-bit driver from the ZMXODBC installation

subvolume (in binary format).

4. Rename the TDMODBC file or the NSODBC64 file; for example: TDMODBC.EXE.

5. Double click TDMODBC.EXE or NSODBC64.EXE; this starts the InstallShield for

NonStop(TM) ODBCMX 3.x, described in Step 2.

Step 2: Install the Client Interface Components

The InstallShield is a wizard that sequentially walks you through the steps to install the

client components on your client workstation. Use the following tables as a guide for

each InstallShield screen:

MXCS software MXCS, version 2.0, installed in the server

Network software TCP/IP

Browser Microsoft Internet Explorer 4.0 or higher; version 5.0 is

recommended.

Note. You must be logged on with a userid that has administrative privileges.

Note. If Microsoft OutsideView32 is running, it must be stopped before you perform this

installation.

Buttons Common

to Most Screens Description

Back

Cancel

Displays the previous screen

Displays the next screen

Aborts the installation

Requirement Description