Open SCSI Integrator's Manual for NonStop S-Series Servers

Running H/F 1
Open SCSI Integrator’s Manual for NonStop Servers—422988-002
#
Running H/F 2
3 Integrating Hardware
•
This section was originally titled “Device
Hardware Integration.”
•
Illustrations and text have been added
about the following subjects:
°
ESD protection
°
Determining SCSI SAC ID numbers
°
SCSI bus configurations
•
Discussions of CRUs that control Open
SCSI devices now include the 6760
ServerNet/DA.
•
Information about cable lengths has been
moved from Section 1, Overview, to this
section.
4 The Open SCSI I/O Process
(IOP)
This section was originally titled “Interfacing
with the Open SCSI I/O Process (IOP).”
5 Configuring Open SCSI Devices
•
Discussions of CRUs that control Open
SCSI devices now include the 6760
ServerNet/DA.
•
Information has been added regarding the
Logical Unit Number (LUN) that disk and
tape devices must be assigned.
7 The SCSI SAC
•
This section was originally titled “The
PMF and IOMF CRU SCSI SAC.”
•
Discussions of CRUs that control Open
SCSI devices now include the 6760
ServerNet/DA.
8 Using TSM This section has been removed.
back
matter
Safety and Compliance
This new section contains a complete listing
of safety and compliance statements.
Glossary
The glossary has been expanded and updated.
Index The index has been expanded and updated.
Table i. Changes and Additions to the G06.06 Version of This Manual (page 1
of 2)
Section Title Changed or New