Open SCSI Integrator's Manual for NonStop S-Series Servers

Index
Open SCSI Integrator’s Manual for NonStop Servers—422988-002
Index-4
N
Messages (continued)
Abort (06h) 7-9
Bus Device Reset (0Dh) 7-10
Command Complete (00) 7-8
Disconnect (04h) 7-8
Identify (08h) 7-10
Initiator Detected Error (05h) 7-9
Message Parity Error (09h) 7-10
No Operation (08h) 7-9
Reject (07h) 7-9
Restore Pointers (03h) 7-8
Save Data Pointer (02h) 7-8
SDTR (01h) 7-8
Synchronous Data Transfer Request
(01h) 7-8
Messages supported 7-1, 7-7/7-10
N
NAMES command (SCF) 6-5/6-6
No Operation (08h) 7-9
NumIO, viewing 5-4
O
Object file name, viewing 5-4
Open SCSI device
see Devices
Open SCSI interface
bus configuration 1-1
/1-3, 3-3/3-6
overview 1-1/1-3
software support 1-3
P
Phases
arbitration 7-2
command 7-2
data 7-2
error 7-2
message 7-2
reselection 7-2
selection 7-2
status 7-2
termination 7-2
Prerequisites 2-1
PrimaryCpu, viewing 5-4
Procedure calls
see Guardian procedure calls
Processor multifunction (PMF) CRUs
see PMF CRU 1-1
Product safety standards 2-2
R
Read count 4-6
Reconnection 7-11
Record size, viewing 5-4, 6-4
Regulatory compliance 2-2
Related publications 2-1
Removing an Open SCSI device 5-8
Renaming an Open SCSI device 5-9
Replacing an Open SCSI device 6-7
Reports
NAMES 6-5
Reselection phase 7-2
Reselection sequence 7-5
Restore Pointers (03h) 7-8
RST (reset) signal (SCSI) 7-12