Open SCSI Integrator's Manual for NonStop S-Series Servers

Integrating Hardware
Open SCSI Integrator’s Manual for NonStop Servers—422988-002
3-2
Electrostatic Discharge (ESD) Precautions
Figure 3-1 illustrates how to use an ESD kit when servicing a CRU.
Figure 3-1. Using ESD Protection When Servicing a CRU
693CDT .CDD
System enclosure
(appearance side)
Grounding clip of ESD
wriststrap attached to
door latch stud
ESD wriststrap
with grounding
clip
Antistatic
floor mats
Antistatic table mat.
Mat should be connected
to a soft ground
(1 megohm min.
to 10 megohm max.)
Clip 15-foot straight
ground cord to screw
on grounded outlet
cover.