Open SCSI Integrator's Manual for NonStop S-Series Servers

Configuring Open SCSI Devices
Open SCSI Integrator’s Manual for NonStop Servers—422988-002
5-2
Example of an INFO SCSI Summary Report
Summary Report Information
The fields shown in the previous example of a summary report have the following
meanings:
* indicates an attribute whose value you can change with the SCF
ALTER SCSI command. For more information, see Altering
Open SCSI Attribute Values on page 5-7.
Primary Location shows the physical location of the PMF CRU, IOMF CRU, or
6760 ServerNet/DA that controls the primary access path to the
Open SCSI device.
Backup Location shows the physical location of the PMF CRU, IOMF CRU, or
6760 ServerNet/DA that controls the backup access path to the
Open SCSI device.
SCSI ID shows the SCSI ID of the Open SCSI device. This is the address
range of values used by the Open SCSI IOP to access the device.
LUN shows the logical unit (LUN) number of the Open SCSI device.
Program shows the object file name of the Open SCSI IOP.
Figure 5-1. Data Paths and SCSI ID for the SCSI Device
Processor 0
XY
Processor 1
XY
PMF CRU
ServerNet Adapter
SAC SCSI ID 6
$DEV0
SCSI ID 0
003CDT .CDD
PMF CRU
ServerNet Adapter
SAC SCSI ID 7