Open SCSI Integrator's Manual for NonStop S-Series Servers

Configuring Open SCSI Devices
Open SCSI Integrator’s Manual for NonStop Servers—422988-002
5-3
Example of an INFO SCSI Detailed Report
Example of an INFO SCSI Detailed Report
The command INFO SCSI $DEV5, DETAIL produces a detailed report such as the
following.
This report shows that $DEV5:
•
Has a primary access path controlled by the PMF CRU in slot 50 of group 01.
•
Has processors 0 and 1 assigned as the primary and backup processors, respectively.
STORAGE - Detailed Info DEVICE $DEV5
I/O Process Configuration Information:
*BackupCpu............................. 1
*HighPin............................... ON
*PrimaryCpu............................ 0
*Program............................... $SYSTEM.SYSTEM.TDSCSI
*RecSize............................... 4096
*StartState............................ STARTED
SCSI Device Settings:
*LUN................................... 0
*MaxOpens.............................. 3
*NumIO................................. 8
*SCSI ID............................... 5
*StructAreaSize........................ 24
*TraceBufLen........................... 33
*TraceLevel............................ 65535
Primary Path Information:
Adapter Name.......................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50
Adapter Location (Group,Module,Slot).. (1,1,50)
SAC Name.............................. $ZZSTO.#PMF.SAC-3.GRP-1.
MOD-1.SLOT-50
SAC SCSI ID........................... 6
SAC Subdevice......................... 5
Backup Path Information:
Adapter Name.......................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
Adapter Location (Group,Module,Slot).. (1,1,55)
SAC Name.............................. $ZZSTO.#PMF.SAC-3.GRP-1.
MOD-1.SLOT-55
SAC SCSI ID........................... 7
SAC Subdevice......................... 5