Open SCSI Integrator's Manual for NonStop S-Series Servers

Managing Open SCSI Devices
Open SCSI Integrator’s Manual for NonStop Servers—422988-002
6-5
Viewing the Object Names of Open SCSI Devices
Viewing the Object Names of Open SCSI Devices
You use the SCF NAMES command to view the object names of any objects managed
by the storage subsystem. The NAMES command does not change the state of any
object.
For complete details about the NAMES command including command syntax, see the
SCF Reference Manual for the Storage Subsystem.
Examples of Viewing the Object Names of Open SCSI Devices
•
To produce a list of all Open SCSI devices configured on the system, enter:
-> NAMES $ZZSTO, SUB SCSI
•
To list the name of the Open SCSI device $DEV0, enter:
-> NAMES $DEV0
Examples of NAMES Reports
•
The following is an example of the report produced by the command:
-> NAMES $ZZSTO, SUB ALL
•
The following is an example of the report produced by the command:
-> NAMES $ZZSTO, SUB SCSI
STORAGE Names SUBSYS \ALM171.$ZZSTO
SUBSYS
$ZZSTO
ADAPTER
$ZZSTO.#IOMF.GRP-11.MOD-1.SLOT-50 $ZZSTO.#IOMF.GRP-11.MOD-1.SLOT-55
$ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50 $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
$ZZSTO.#PMF.GRP-2.MOD-1.SLOT-50 $ZZSTO.#PMF.GRP-2.MOD-1.SLOT-55
DISK
$SYSTEM $DATA14 $DATA13 $DATA12 $DATA11 $DATA10 $DATA09 $DATA08
$DATA07
$DATA06 $DATA05 $DATA04 $DATA03 $DATA02 $DATA01 $DATA00
SCSI
$DEV0 $DEV1
TAPE
$TAPE1 $TAPE0
STORAGE Names SUBSYS \ALM171.$ZZSTO
SCSI
$DEV0 $DEV1