Open System Services Installation Guide (H06.16+, J06.05+)

Example 1 OSSINF File Contents
* File: OSS Monitor in-file ( Version 1.0 ) {<--MUST BE FIRST LINE OF FILE }
* This is an in-file for the OSS T0585 utilities STARTOSS and OSSSETUP. The
* OSS Monitor process manages all entries in this file.
* There is no need to refer to any name server or transport agent server.
* Name servers are automatically started when their corresponding filesets
* are started. Transport agent servers are started when a processor is
* reloaded.
* NOTE: Add an asterisk followed with a space in front of a line to prevent
* that server or fileset from being started.
* Format for server entry: SERVER #<name>
* Format for fileset entry: FILESET <name>
* Start the OSS Message Queue Server:
SERVER #ZMSGQ
* Add additional filesets to the end of this file. Starting order
* of filesets must be maintained. An incorrect order can cause
* filesets not to start. Do not use a hash mark (#) in fileset names.
* Start the OSS ROOT, HOME and TEMP Filesets:
FILESET ROOT
FILESET HOME
FILESET TEMP
Required Terminal Emulator
The OSSSETUP utility requires a terminal emulator such as one of these:
• Telnet session
• 6530 terminal emulator
• X6530 terminal emulator
• OutsideView from Crystal Point Inc.
• MR-Win6530 from comForte
• HP NonStop SSH(J06.09 and later J-series RVUs and H06.20 and later H-series RVUs only)
• SecureSH from comForte (J06.09 and later J-series RVUs and H06.20 and later H-series RVUs
only)
On J06.09 and later J-series RVUs and H06.20 and later H-series RVUs, in addition supporting
the terminal emulators listed previously, OSSSETUP will execute under SSH sessions using products
like HP NonStop SSH, comForte SecureSH, and Gemini STN.
OSSSETUP will not execute under sessions such as the start-up TACL window (the CLCI window,
$YMIOP.#CLCI).
Utility PARAMs
The EasySetup utilities support the TACL PARAM declarations listed in Table 3 (page 15).
Table 3 TACL PARAM Declarations for EasySetup Utilities
Used byPARAM valuePARAM Name
A valid disk volume name that identifies the disk on which the
Event Management Service (EMS) subvolume (ZSPIDEF) resides.
EASYSETUP^EMSVOL OSSSETUP
STARTOSS
This subvolume must contain the event definition files ZOSSTACL
and ZEMSTACL.
STOPOSS
Required Terminal Emulator 15