OSF DCE Problem Determination Guide Revision 1.
0− 0 Tandem Computers Incorporated 124330
Contents _____________________________ Preface . . . . . . . . . . . . . . . . . . . . . . . . . . i . . . . . . . . . . . . . . . . . . . . i . . . . . . . . . . . . . . . . . . . i . . . . . . . . . . . . . . . . . . . i Document Usage . . . . . . . . . . . . . . . . . . i Related Documents . . . . . . . . . . . . . . . . . ii Problem Reporting . . . . . . . . . . .
Preface The provides a compilation of all DCE error messages and status codes along with explanations and recovery actions. Audience This guide is written for DCE application programmers and system and network administrators. Applicability This is a new document. It applies to the OSF DCE Version 1.1 offering and related updates. See your software license for details.
OSF DCE Problem Determination Guide Related Documents For additional information about OSF DCE, refer to the following documents: • Introduction to OSF DCE • • • OSF DCE Administration Reference • • • • OSF DCE Application Development Reference • • • OSF DCE Porting and Testing Guide • Application Environment Specification/Distributed Computing • OSF DCE Release Notes Problem Reporting If you have any problems with the software or documentation, please contact your software vendor’s customer se
Chapter 1.
OSF DCE Problem Determination Guide 1.1 Message Structure Each message or code block contains several fields of information. With the exception of the XDS, XOM, and Pthreads messages, the first field contains a unique 32-bit hex value. XDS and XOM messages are X.500 compliant. The Pthreads messages are Posix-compliant. As a result, they do not have an error number or a hex value. These messages contain dashes (---) in the first field. The second field contains the symbolic name for the message or code.
Introduction Notice Verbose This is the same as above, but contains more detailed information. When more than one subcomponent can return a given error message or status code, the severity level is dependent on the subcomponent or particular circumstances. In these cases, the severity field will state, "Varies". 1.1.2 Subcomponents DCE components can consist of several subcomponents.
OSF DCE Problem Determination Guide STDOUT Messages are written as human-readable text to standard output STDERR Messages are written as human-readable text to standard error GOESTO Messages are sent to the destination designated for the specified severity level Messages of different severity levels can be routed differently. For example, all "Notices" could be discarded and all "Fatal" errors could be written to a binary log.
Introduction For additional information on the Serviceability API, see the Serviceability chapter in the . 1.3 Administering the Routing State The log command of the DCE control program (dcecp) allows you to determine the serviceability components that are registered by the server. You can also request a list of the subcomponents for each component registered. The log command also allows you to change the routing specifications for a server.
Chapter 2. Error Messages and Status Codes ---------- -----Severity: Notice Component: Threads Text: Asynchronous or General cancelabilty was off. Explanation: A successful attempt was made to set either asynchronous or general cancelability to off. Action: None required. ---------- -----Severity: Notice Component: Threads Text: Asynchronous or General cancelability was on. Explanation: A successful attempt was made to set either asynchronous or general cancelability to on. Action: None required.
OSF DCE Problem Determination Guide Explanation: The requested routine executed successfully. Generally, zero (0) is returned by errno. In some cases, the requested attribute value is returned. Action: None required. ---------- -----Severity: Notice Component: Threads Text: Values of thread1 and thread2 designate the same object. Explanation: An attempt was made to compare one thread identifier to another thread identifier using the pthread_equal routine. Action: None required.
Error Messages and Status Codes Explanation: The ACL accessed has no entries. Action: Be sure that the ACL has at least one entry. 0x1460101d acl_s_no_control_entries Severity: Varies Component: lib Text: No ACL entries have the control bit set. Explanation: In a rdacl_replace operation an attempt was made to replace the ACL where no entries have control permission. Action: Ensure that at least one ACL entry has control permission.
OSF DCE Problem Determination Guide Text: SEC_ACL_EDIT - bad data format Explanation: ? Action: None required 0x1708309d ae_tty_bad_domain Severity: Varies Component: sad Text: SEC_ACL_EDIT - bad domain Explanation: ? Action: None required 0x17083094 ae_tty_cant_parse Severity: Varies Component: sad Text: SEC_ACL_EDIT - unable to parse string Explanation: ? Action: None required 0x1708309c ae_tty_entry_is_required Severity: Varies Component: sad Text: SEC_ACL_EDIT - entry required Explanation: ? Actio
Error Messages and Status Codes Severity: Varies Component: sad Text: SEC_ACL_EDIT - input out of range Explanation: ? Action: None required 0x17083097 ae_tty_invalid_argument Severity: Varies Component: sad Text: SEC_ACL_EDIT - invalid argument Explanation: ? Action: None required 0x17083096 ae_tty_invalid_option Severity: Varies Component: sad Text: SEC_ACL_EDIT - invalid option Explanation: ? Action: None required 0x17083098 ae_tty_opt_requires_arg Severity: Varies Component: sad Text: SEC_ACL_ED
OSF DCE Problem Determination Guide 0x10323069 aud_s_action_bit_set Severity: Notice Component: aud / aud_s_esl Text: Audit Actions: %lx Explanation: Lists Audit actions. Action: None required. 0x10323067 aud_s_cannot_allocate_memory Severity: Varies Component: aud Text: Cannot allocate %d bytes memory Explanation: The malloc() call failed. Action: Report to your system administrator for resolution.
Error Messages and Status Codes Explanation: The call utc_gettime() failed. Action: Check the reason why the call utc_gettime failed and act accordingly. 0x10323083 aud_s_cannot_init_trail_mutex Severity: Error Component: aud / aud_s_trl Text: Cannot initialize the mutex for the audit trail. Explanation: The pthread_mutex_init() call failed. Action: Check the return code of the pthread_mutex_init() call.
OSF DCE Problem Determination Guide 0x10323070 aud_s_cannot_open_event_class_file Severity: Error Component: aud / aud_s_general Text: Cannot open event class file %s to read. Explanation: An attempt to open the indicated event class file failed. You must have read permission to the file. Action: Check the file permissions and ensure that you have read permission to the file. Then, retry the operation.
Error Messages and Status Codes Text: Cannot reopen audit trail file Explanation: Internally, the audit trail file was being reopened and the reopen failed. Action: Report the problem to OSF. 0x10323052 aud_s_cannot_reopen_trail_index_file Severity: Error Component: aud / aud_s_trl Text: Cannot reopen %s Explanation: Internally, the audit trail index file was being reopened and the reopen failed. Action: Report the problem to OSF.
OSF DCE Problem Determination Guide Action: Check system resource availability. 0x1032306a aud_s_condition_bit_set Severity: Notice Component: aud / aud_s_esl Text: Audit Conditions: %lx Explanation: Lists Audit conditions. Action: None required. 0x10323021 aud_s_dmn_acl Severity: Error Component: aud / aud_s_general Text: Cannot initialize daemon’s ACL Explanation: An attempt to initialize the Access Control List for the daemon failed. This is not the first point of failure.
Error Messages and Status Codes Text: Cannot add unauthenticated obj to ACL: %lx Explanation: An attempt to add unauthenticated permissions to Auditd ACL failed. Action: DCE utilities error. Check utilities codes for more information. 0x1032301a aud_s_dmn_acl_obj_add_user_entry Severity: Error Component: aud / aud_s_general Text: Cannot add host user to ACL: %lx Explanation: An attempt to add host user to Auditd ACL failed. Action: DCE utilities error. Check utilities codes for more information.
OSF DCE Problem Determination Guide 0x10323017 aud_s_dmn_bindings Severity: Error Component: aud / aud_s_general Text: Unable to get daemon bindings Explanation: The Audit daemon tried to inquire for its own bindings using rpc_server_inq_bindings and failed. Action: Check the RPC return code and act accordingly. 0x10323006 aud_s_dmn_cannot_get_context Severity: Error Component: aud / aud_s_general Text: Auditd unable to get current login context.
Error Messages and Status Codes Explanation: The sec_login_release_context API returned the error: %d Action: Please refer to the DCE Problem Determination Guide for more information. 0x10323025 aud_s_dmn_control_export_interface Severity: Error Component: aud / aud_s_general Text: Cannot register daemon’s control interface bindings to CDS Explanation: CDS call failed. Action: Report the problem.
OSF DCE Problem Determination Guide Text: The daemon disabled for logging Explanation: An attempt was made to log an audit record but the audit trail file is full or the Audit daemon has been disabled by the administrator. Action: Empty the trail file and issue the aud enable command, or change the stostrategy to wrap around the trail file.
Error Messages and Status Codes Action: Check that the Audit daemon has write permission to the indicated file. 0x10323022 aud_s_dmn_interfaces Severity: Error Component: aud / aud_s_general Text: Cannot register daemon’s RPC interfaces Explanation: An attempt to register the RPC interface for the Audit daemon using rpc_server_register_if() failed. Action: Check the RPC return code and act accordingly.
OSF DCE Problem Determination Guide Explanation: The user is trying to run the Audit daemon, but does not have the appropriate privileges. Action: Login as root before starting up the Audit daemon. 0x10323016 aud_s_dmn_protseq Severity: Error Component: aud / aud_s_general Text: Unable to select protocol sequence Explanation: RPC tried to register the protocol sequence and failed. Action: Check the RPC return code and act accordingly.
Error Messages and Status Codes Severity: Error Component: aud / aud_s_general Text: Daemon state mutext initialization failed Explanation: There was insufficient resource or memory to initialize the state mutex. Action: Check system resource availability.
OSF DCE Problem Determination Guide Action: Give the trail filename with the -t option. 0x10323004 aud_s_dmn_trail_size Severity: Error Component: aud / aud_s_general Text: The -s option used without an argument Explanation: The -s option requires a trail file size limit. Action: Give the trail file size limit (defined by the user) with the -s option.
Error Messages and Status Codes Explanation: A call to rpc_sm_client_free() to free the encoding handle failed. Action: Check the RPC return code, this may be a memory leak. 0x10323046 aud_s_invalid_action_bit_set Severity: Error Component: aud / aud_s_esl Text: Audit action bit set %lx is not within %lx Explanation: The audit control client provided an invalid action vector. Action: Specify valid actions in the filter. Refer to the administration guide for the descrption of valid actions.
OSF DCE Problem Determination Guide 0x1032306c aud_s_invalid_event_class_file Severity: Error Component: aud / aud_s_general Text: Format error in event class file %s. Explanation: A format error was encountered in the event class file. Action: Correct the event class file format error, and retry.
Error Messages and Status Codes Text: An invalid audit trail descriptor was used Explanation: The user invoked the Audit routines using an invalid at value. Action: Use a valid audit trail descriptor. 0x1032306e aud_s_line_too_long_in_class_file Severity: Error Component: aud / aud_s_general Text: A line is too long in event class file %s Explanation: A line in the event class file exceeds 2K. Action: Check the event class file. Correct the line length and retry the operation.
OSF DCE Problem Determination Guide Action: None required. 0x10323056 aud_s_open_esl_file Severity: Warning Component: aud / aud_s_esl Text: Cannot open esl file %s Explanation: The Audit daemon cannot open the esl file. Action: Check if the esl file should be there. If so, check permissions. 0x10323057 aud_s_open_esl_update_file Severity: Warning Component: aud / aud_s_esl Text: Cannot open esl update file %s Explanation: The Audit daemon cannot open the esl file.
Error Messages and Status Codes Severity: Error Component: aud / aud_s_esl Text: Unable to remove client update binding file %s, rc= %d, errno= %d Explanation: Audit client cannot remove its binding file. Action: Remove the specified file. 0x10323053 aud_s_rename_esl_file Severity: Error Component: aud / aud_s_esl Text: Cannot rename %s to %s Explanation: Internally, the esl file was being renamed and the renaming failed. Action: Report the problem to OSF.
OSF DCE Problem Determination Guide 0x1032304d aud_s_rename_trail_index_file_rc Severity: Error Component: aud / aud_s_trl Text: Cannot rename audit trail index file Explanation: Internally, the audit trail index file was being renamed and the renaming failed. Action: Report the problem to OSF.
Error Messages and Status Codes Text: Cannot stat esl file %s Explanation: The fstat() call on the esl file failed. Action: Check the fstat() error code and act accordingly. 0x10323058 aud_s_stat_esl_update_file Severity: Error Component: aud / aud_s_esl Text: Cannot stat esl update file %s Explanation: The UNIX stat command returned an error when the Audit daemon tried to get size information about the esl file. Action: Make sure the /opt/dcelocal/var/audit/esl*. file exists.
OSF DCE Problem Determination Guide Action: The dce_aud_open() function must include either the read or write option. Correct the function call by including one of these options. 0x10323049 aud_s_trl_invalid_stostrategy Severity: Error Component: aud / aud_s_trl Text: Audit trail store strategy is invalid Explanation: The audit control client provided an invalid store strategy. Action: Provide a valid store strategy. Valid store strategies are described in the Administration guide.
Error Messages and Status Codes Severity: Error Component: aud / aud_s_general Text: %s is not a known event class. Explanation: There is no event class file for the indicated event class. Action: Use a known event class. Use the audevents catalog command to obtain a list of all known event classes. 0x10323040 aud_s_unknown_foreign_group Severity: Error Component: aud / aud_s_esl Text: Foreign group %s is not registered or has been removed Explanation: An unknown foreign group name was used in a filter.
OSF DCE Problem Determination Guide 0x1032303d aud_s_unknown_group_rc Severity: Error Component: aud / aud_s_esl Text: Group is not registered or has been removed Explanation: An unknown group name was used in a filter. Action: Provide a known group name. 0x1032303a aud_s_unknown_principal Severity: Error Component: aud / aud_s_esl Text: Principal %s is not registered or has been removed Explanation: An unknown principal name was used in a filter. Action: Provide a known principal name.
Error Messages and Status Codes 0x10323030 aud_s_wrong_protection_level Severity: Error Component: aud / aud_s_general Text: RPC client used wrong protection level Explanation: Returned the information from the rpc_binding_inq_auth() together with authr_level=rpc_c_protect_level_pkt_privacy and authz_svc=rpc_c_authz_dce. Action: Check communication between the client and the application server. Then, adjust the protection level.
OSF DCE Problem Determination Guide 0x10d0a45e CDS_ALIASTOOLONG Severity: Varies Component: cds Text: The supplied cellname is required to be < 255 bytes in length. Explanation: Name to long. Action: Choose a shorter cellname. 0x10d0a462 CDS_ALIASTOOSHORT Severity: Varies Component: cds Text: The supplied cellname is required to have two simple names for an alias and three simple names for a child alias. Explanation: Cellname is to short. Action: Choose a longer cellname.
Error Messages and Status Codes 0x10d0a3ee CDS_CANNOTAUTHENTICATE Severity: Varies Component: cds Text: Requesting principal could not be authenticated to the clearinghouse Explanation: The server could not obtain a Privilege Attribute Certificate it could use for user authentication. Action: Login again and retry the command. 0x10d0a45d CDS_CANNOT_REM_CELLNAME Severity: Varies Component: cds Text: You cannot remove the current cellname alias. Explanation: Cannot remove cell alias.
OSF DCE Problem Determination Guide 0x10d0a96f CDS_CL_READ Severity: Varies Component: cds Text: Buffer too small Explanation: The buffer provided to cdsGetMsg() was too small for the requested message. Action: See your DCE support person. 0x10d0a3ef CDS_CONFLICTINGARGUMENTS Severity: Varies Component: cds Text: Conflicting arguments specified Explanation: Your command contains two or more conflicting arguments. You cannot include the specified arguments within a single command.
Error Messages and Status Codes Explanation: The specified file for the do command could not be opened. Action: Check that the file exists. 0x10d0aed3 CDSCP_CANT_OPEN_PARSE_TABLE Severity: Fatal Component: cds / cds_svc_cdscp Text: Cannot open file %s\n Explanation: The auxilliary file cdscp.bpt could not be opened. Action: Reinstall cdscp. 0x10d0af24 CDSCP_CMD_DFL Severity: Fatal Component: cds / cds_svc_cdscp Text: Internal error: command function %d not handled.
OSF DCE Problem Determination Guide Text: Could not open file %s.\n Explanation: An fopen(3s) call failed Action: Make sure the file exists and that file protection is set appropriatly. 0x10d0af2e CDSCP_GRATTRS_1 Severity: Error Component: cds / cds_svc_cdscp Text: Received CDS_NOCOMMUNICATION adding attribute %s to %s\n Explanation: An attribute set value could not be added due to communications problem. Action: Retry the operation.
Error Messages and Status Codes Action: Insure sufficient swap space. 0x10d0aed5 CDSCP_NO_FIT Severity: Fatal Component: cds / cds_svc_cdscp Text: %d byte file %s will not fit in %d byte buffer\n Explanation: A parse file line was longer than the read buffer could accomodate. Action: The parse file is too big. Contact your DCE support person. 0x10d0aef4 CDSCP_NOGETHAND Severity: Varies Component: cds Text: No memory to get handle to nameserver.
OSF DCE Problem Determination Guide Explanation: Memory for creating a replica set could not be obtained during the creation of a child pointer. Action: Insure sufficient swap space and try again.
Error Messages and Status Codes 0x10d0aecd CDSCP_TWO_MASTERS Severity: Varies Component: cds Text: More than one master replica specified\n Explanation: You specified more than one master replica in the set directory to new epoch command. A directory’s replica set can contain only one master replica. Action: Reenter your command and specify only one clearinghouse location for the directory’s master replica.
OSF DCE Problem Determination Guide Explanation: The server returned an attribute which was unknown to this cdscp. Action: Software version mismatch. See your DCE support person. 0x10d0aca6 CDS_CSCLHEXISTS Severity: Varies Component: cds Text: Cached Server clearinghouse already exists Explanation: A clearinghouse returned by the requested server already exists in the cache. Action: Check if there is a duplicate clearinghouse name.
Error Messages and Status Codes 0x10d0a404 CDS_DATACORRUPTION Severity: Varies Component: cds Text: Data corruption detected at clearinghouse Explanation: An error occurred while CDS was accessing the data in a clearinghouse. The clearinghouse may be corrupted. Action: Refer to the servicablily logs on the system where the clearinghouse resides to determine the cause of the error. Verify the corruption. If any of the clearinghouse database files are missing, the clearinghouse cannot be recovered.
OSF DCE Problem Determination Guide Text: Invalid argument Explanation: An invalid argument was passed to a cds API routine. Action: Check the calling routine. 0x10d0a3ea CDS_INVALIDNAME Severity: Varies Component: cds Text: Invalid name Explanation: The command you entered may contain misspelled words, illegal characters, or other typographical errors. You may have included extraneous words or omitted required node, option, or argument specifications.
Error Messages and Status Codes Text: Unable to modify the cell aliases because the root directory is missing the DirectoryVersion attribute. Explanation: This is a highly unusual situation and may be a signal that there are other problems with the Cell Directory Service. Action: Try skulking the root directory of the cell.
OSF DCE Problem Determination Guide 0x10d0a3ec CDS_NOCOMMUNICATION Severity: Varies Component: cds Text: Unable to communicate with any CDS server Explanation: The clerk from which you issued your command was unable to communicate with any CDS server capable of processing your request. Action: Verify connectivity to an appropriate server system. Make sure that the server is running.
Error Messages and Status Codes 0x10d0a457 CDS_NOT_AN_ALIAS Severity: Varies Component: cds Text: The name provided was not an alias or the current cell name. Explanation: The name provided is either for another cell or referred to the current primary name of the cell. Action: Check that the name provided is a cell alias (not primary) of the current cell.
OSF DCE Problem Determination Guide Action: None required. 0x10d0a456 CDS_NOTINCELL Severity: Varies Component: cds Text: The name provided is not a part of the current cell. Explanation: In translating a global name to a cell-relative name, the global name provided is for another cell. Action: Check that the global name specifies one of the current cell aliases in its name.
Error Messages and Status Codes Action: Version mismatch. Either the server or client software must be upgraded. 0x10d0a408 CDS_OLDSKULK Severity: Varies Component: cds Text: Skulk in progress terminated; superseded by more recent skulk. Explanation: A skulk in progress contacted a replica and found that the replica was modified by a more recent skulk. The skulk in progress terminates. Action: None required. 0x10d0a003 CDS_PENDING Severity: Varies Component: cds Text: Operation in progress.
OSF DCE Problem Determination Guide Action: Look for reasons in the serviceability log. 0x10d0a45b CDS_REM_NOT_SAFE Severity: Varies Component: cds Text: You cannot remove an alias until the primary alias is considered ’safe’. Explanation: CDS must be certain that the primary alias of a cell is known to all clearinghouses in the cell before it can accept remove transactions to the alias list. This assures that all CDS servers in the cell will operate in a consistant manner.
Error Messages and Status Codes Action: See servicablility log for a description of the function which failed. 0x10d0aba2 cds_s_aclwrite Severity: Warning Component: cds / cds_svc_general Text: Unable to save acl. Explanation: An error occured trying to create the default ACL. Action: Ensure enough disk space exists for /opt/dcelocal/var/adm/directory/cds. 0x10d0a154 cds_s_addcell_cellinfo Severity: Varies Component: cds Text: Error trying to obtain cell information for X.500: status = %ld.
OSF DCE Problem Determination Guide Severity: Varies Component: cds Text: Added entry %s to X.500 Explanation: The specified cell entry was successfully added to the X.500 directory. Action: None required. 0x10d0a155 cds_s_addcell_workspace Severity: Varies Component: cds Text: Workspace initialization failed. Explanation: Unable to initialize X.500 workspace. Action: Ensure X.500 client and server are running.
Error Messages and Status Codes 0x10d0a2c8 cds_s_adver_aclwrite Severity: Warning Component: cds / cds_svc_adver Text: Unable to save acl: status = %ld. Explanation: An error occured trying to create the default ACL. Action: Ensure enough disk space exists for /opt/dcelocal/var/adm/directory/cds. 0x10d0a2c4 cds_s_adver_badadver Severity: Warning Component: cds / cds_svc_adver Text: Bad CDS Advertisement received Explanation: An invalid advertisement message was received. It will be ignored.
OSF DCE Problem Determination Guide Action: None required. 0x10d0a2c2 cds_s_adver_execve Severity: Fatal Component: cds / cds_svc_adver Text: Unable to start execution of the child: errno = %ld. Explanation: Unable to start execution of the child - This causes the advertiser to exit . Action: See the execve(2) and errno man page. 0x10d0a2c1 cds_s_adver_fork Severity: Error Component: cds / cds_svc_adver Text: Unable to fork clerk process: errno = %ld.
Error Messages and Status Codes Severity: Error Component: cds / cds_svc_adver Text: Routine mkfifo(2) failed on child fifo ’%s’ : errno = %ld. Explanation: Unable to create fifo which alows communication between the advertiser & it’s child. Action: See the mkfifo(2) and errno man page. 0x10d0a2c7 cds_s_adver_noacl Severity: Notice Component: cds / cds_svc_adver Text: No acl file existed - Creating a default ACL Explanation: No ACL file existed -> creates an ACL and writes it out. Action: None required.
OSF DCE Problem Determination Guide Text: CDS Advertiser Starting. Explanation: Displayed to show the user that the advertiser is starting -> time/date information of the start-up can be gained from the preample of this message that the SVC code adds to this text. Action: None required. 0x10d0ab5b cds_s_alloc Severity: Error Component: cds / cds_svc_general Text: Unable to allocate more memory. Explanation: A call to the function to allocate dynamic memory failed.
Error Messages and Status Codes 0x10d0ab9c cds_s_bad_add_unauth_acl Severity: Error Component: cds / cds_svc_general Text: dce_acl_obj_add_unauth_entry returned status %ld : %s Explanation: A call to dce_acl_obj_add_unauth_entry has failed. Action: Restart cds 0x10d0ab99 cds_s_bad_add_user_acl Severity: Error Component: cds / cds_svc_general Text: dce_acl_obj_add_user_entry returned status %ld : %s Explanation: A call to dce_acl_obj_add_user_entry has failed.
OSF DCE Problem Determination Guide Action: None required. 0x10d0a073 cds_s_cache_badversion Severity: Error Component: cds / cds_svc_cache Text: Bad data in cache version file %s. Explanation: The version file is smaller then expected. A new cache will be created. Action: Ensure the directory is accessible so the cache can be reused the next time DCE is started. 0x10d0a080 cds_s_cache_blink_a Severity: Fatal Component: cds / cds_svc_cache Text: Cache header corrupt: Bad cache header backward link.
Error Messages and Status Codes 0x10d0a07a cds_s_cache_createcache Severity: Error Component: cds / cds_svc_cache Text: Error opening cache version file %s for write: status = %ld. Explanation: Routine open(2) failed while trying to create cache file. Action: Ensure that a writable file can be created in the specified location, see error status for further information.
OSF DCE Problem Determination Guide Text: Could not allocate space in global cache, expected lock is not held. Explanation: The cache caller did not hold a write lock on the global cache. Action: Have a DCE support person examine the file. Delete the cache and restart the advertiser. 0x10d0a07c cds_s_cache_header_a Severity: Fatal Component: cds / cds_svc_cache Text: Cache header corrupt: Bad cache header address. Explanation: Offset of cache header address is not valid.
Error Messages and Status Codes CA_SEM_LOCKED. Action: Have a DCE support person examine the file. Delete the cache and restart the advertiser. 0x10d0a085 cds_s_cache_llock_a Severity: Fatal Component: cds / cds_svc_cache Text: Could not insert cache header into freelist, expected lock is not held. Explanation: The cache caller did not hold a lock on the freelist. Action: Have a DCE support person examine the file. Delete the cache and restart the advertiser.
OSF DCE Problem Determination Guide Explanation: Software has been upgraded and the existing cache files are no longer usable. The cache files will be deleted and a new cache created. Action: None required. 0x10d0a074 cds_s_cache_opencache Severity: Error Component: cds / cds_svc_cache Text: Error opening cache file %s for read: status = %ld. Explanation: Routine open(2) failed. A new cache will be created. Action: Ensure the directory is accessible so the cache can be reused the next time DCE is started.
Error Messages and Status Codes Action: Ensure that the specified file exists and is readable. 0x10d0a072 cds_s_cache_readversion Severity: Error Component: cds / cds_svc_cache Text: Error reading cache version file %s: status = %ld. Explanation: Routine read(2) returned a error status. A new cache will be created. Action: Ensure the directory is accessible so the cache can be reused the next time DCE is started.
OSF DCE Problem Determination Guide 0x10d0a07b cds_s_cache_snapshot_file Severity: Notice Component: cds / cds_svc_cache Text: Cache snapshot has been written to file %s. Explanation: Cache corruption has been detected, and the flawed cache has been checkpointed. Action: Have a DCE support person examine the file. Delete the cache and restart the advertiser.
Error Messages and Status Codes 0x10d0a079 cds_s_cache_writecache Severity: Error Component: cds / cds_svc_cache Text: Deleting cache file %s due to write errors. Failed to write remaining %d bytes. status: %s Explanation: Routine write(2) failed while writing cache to disk. Cache has been deleted. Action: Ensure that a writable file can be created in the specified location, check that sufficient free disk space exists, see error status for further information.
OSF DCE Problem Determination Guide 0x10d0a1f5 cds_s_child_badshmem_eb Severity: Fatal Component: cds / cds_svc_child Text: Shared memory id (%d) invalid : status = %ld. Explanation: The share memory id of the cache (passed to the cdsclerk when it is started) was invalid. Action: Stop the advertister, remove the shared memory section and restart the advertiser. 0x10d0a1f6 cds_s_child_cacheload_eb Severity: Fatal Component: cds / cds_svc_child Text: Exitting because of error loading the cache.
Error Messages and Status Codes Explanation: The server the clerk tried to contact was not a member of the group of valied cds server principals. Action: Ensure the server is a valid nameserver and add the principal name to the register group specified. 0x10d0a1fc cds_s_child_signal_eg Severity: Notice Component: cds / cds_svc_child Text: Exit due to signal number %d request Explanation: The child has been instructed to exit by receiving the signal request.
OSF DCE Problem Determination Guide Explanation: A fatal error was detected by the database compression mechanism. Action: Restart the server and report this problem to your DCE supplier. 0x10d0aa8d cds_s_dbcmp_nonnullptr_a Severity: Fatal Component: cds / cds_svc_server Text: Assertion check failed line %d file %s: Last node of level-1 work bucket flushed to disk was non null Explanation: A fatal error was detected by the database compression mechanism.
Error Messages and Status Codes 0x10d0aa8e cds_s_dbcmp_nullfp_a Severity: Fatal Component: cds / cds_svc_server Text: Assertion check failed at line %d file %s: Null file pointer. Explanation: A fatal error was detected by the database compression mechanism. Action: Restart the server and report this problem to your DCE supplier.
OSF DCE Problem Determination Guide Explanation: Directory version does not support ACL entries with delegation. Action: See the documentation on how to upgrade the directory version of a directory. 0x10d0ab9f cds_s_export_thread Severity: Error Component: cds / cds_svc_general Text: Unable to start export thread. dthread_create returns : %s Explanation: A call to dthread_create has failed. Action: See preceeding errors logged by library for more detailed information.
Error Messages and Status Codes 0x10d0a13a cds_s_gda_badreplicatype Severity: Error Component: cds / cds_svc_gda Text: Replica type in global directory is neither a Master nor Readonly Explanation: The replica type in the global directory is incorrect. Action: Use your global directory administration utilities to correct the entry. 0x10d0a13b cds_s_gda_badtower Severity: Error Component: cds / cds_svc_gda Text: Invalid tower specification global directory.
OSF DCE Problem Determination Guide Action: Manually fix the entry. Restart the GDA for the change to take effect. 0x10d0a143 cds_s_gda_dname Severity: Notice Component: cds / cds_svc_gda Text: Line %d of named.ca: DNAME syntax error. Explanation: An invalid DNAME line was found in named.ca. The line will be ignored. Action: Manually fix the entry. Restart the GDA for the change to take effect.
Error Messages and Status Codes Text: Unable to initialize the RPC interface. Explanation: An error occurred trying to initialize the RPC interface. Action: See the servicablility log for more information. The gda will exit. 0x10d0a14b cds_s_gda_initsec_eb Severity: Fatal Component: cds / cds_svc_gda Text: Can’t perform security initialization. Explanation: An error occurred while trying to initialize Global Directory Agents security parameters.
OSF DCE Problem Determination Guide 0x10d0a148 cds_s_gda_option Severity: Notice Component: cds / cds_svc_gda Text: Line %d of named.ca: Unknown $ option: %s. Explanation: An invalid $ option was found in named.ca. The line will be ignored. Action: Manually fix the entry. Restart the GDA for the change to take effect. 0x10d0a142 cds_s_gda_origin Severity: Notice Component: cds / cds_svc_gda Text: Line %d of named.ca: ORIGIN syntax error. Explanation: An invalid ORIGIN line was found in named.ca.
Error Messages and Status Codes 0x10d0a12c cds_s_gda_startup Severity: Notice Component: cds / cds_svc_gda Text: CDS GDA Starting. Explanation: Displayed when the Global Directory Agent starts running. Gives the start time and date for future reference in the preamble to this message. Action: None required. 0x10d0a144 cds_s_gda_ttl Severity: Notice Component: cds / cds_svc_gda Text: Line %d of named.ca: ttl syntax error. Explanation: An invalid ttl value was found in named.ca. The line will be ignored.
OSF DCE Problem Determination Guide Explanation: An error has occured trying to read an existing GDA uuid from the specified file. The GDA will exit when this message appears. Action: Check that the file is readable and contains a valid UUID. 0x10d0a134 cds_s_gda_write Severity: Error Component: cds / cds_svc_gda Text: Routine write(2) failed : status = %ld. Explanation: A call to the system function write(2) has failed. Action: See the write(2) manual page for further details.
Error Messages and Status Codes 0x10d0a9ca cds_s_library_cd_eg Severity: Fatal Component: cds / cds_svc_library Text: Can’t change to directory %s/%s: errno = %ld. Explanation: The daemon was unable to change to the directory specified using the chdir(2) system function Action: See the chdir(2) manual page for further details. 0x10d0a9cb cds_s_library_cdsmalloc_a Severity: Fatal Component: cds / cds_svc_library Text: Memory fatal in instrumented allocation routines.
OSF DCE Problem Determination Guide Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0a9c6 cds_s_library_refresh_eb Severity: Fatal Component: cds / cds_svc_library Text: Failed to refresh server identity: status = %ld. Explanation: Error trying to keep the servers identity current. The server will exit. Action: See the indicated status code for additional detail. The status codes are documented in this manual.
Error Messages and Status Codes 0x10d0ab57 cds_s_nopriv_eb Severity: Fatal Component: cds / cds_svc_general Text: You must have system privileges to start this server. Explanation: The user is not ’root’ Action: Re-login as user ’root’. 0x10d0a96c CDS_SOCKET Severity: Varies Component: cds Text: Error with socket Explanation: The communications between the DCE library and the cds clerk child has failed. The connection is closed. Action: If the problem persists, restart DCE.
OSF DCE Problem Determination Guide Explanation: A call to the system function pthread_cond_broadcast(3) has failed. Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab8a cds_s_pthreadcondbroadcast_a Severity: Fatal Component: cds / cds_svc_general Text: Routine pthread_cond_broadcast(3) failed : status = %ld. Explanation: A call to the system function pthread_cond_broadcast(3) has failed. Program will abort.
Error Messages and Status Codes Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab93 cds_s_pthreadcondsignal Severity: Fatal Component: cds / cds_svc_general Text: Routine pthread_cond_signal failed : status = %ld. Explanation: A call to the system function pthread_cond_signal failed. Action: See the indicated status code for additional detail. The status codes are documented in this manual.
OSF DCE Problem Determination Guide 0x10d0ab90 cds_s_pthreadcondwait_a Severity: Fatal Component: cds / cds_svc_general Text: Routine pthread_cond_wait failed : status = %ld. Explanation: A call to the system function pthread_cond_wait failed. The program will abort. Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab7a cds_s_pthreadcreate Severity: Fatal Component: cds / cds_svc_general Text: Routine pthread_create failed : status = %ld.
Error Messages and Status Codes 0x10d0ab86 cds_s_pthreadmutexdestroy Severity: Fatal Component: cds / cds_svc_general Text: Routine pthread_mutex_destroy failed : status = %ld. Explanation: A call to the function pthread_mutex_destroy failed. Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab87 cds_s_pthreadmutexdestroy_a Severity: Fatal Component: cds / cds_svc_general Text: Routine pthread_mutex_destroy failed : status = %ld.
OSF DCE Problem Determination Guide Severity: Fatal Component: cds / cds_svc_general Text: Routine pthread_mutex_lock failed : status = %ld. Explanation: A call to the system function pthread_mutex_lock failed. The program will abort. Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab88 cds_s_pthreadmutextrylock Severity: Fatal Component: cds / cds_svc_general Text: Routine pthread_mutex_trylock(3) failed : status = %ld.
Error Messages and Status Codes Severity: Warning Component: cds / cds_svc_server Text: Transaction log replay detected an unrecognized buffer state: %d Explanation: The transaction log replay state machine detected an unknown state. Transaction log replay was terminated. Action: Report this to your DCE supplier. The clearinghouse may have lost information modified since the last database checkpoint.
OSF DCE Problem Determination Guide 0x10d0aa85 cds_s_replay_stats Severity: Notice Component: cds / cds_svc_server Text: Transaction log statistics for clearinghouse %s. Creates: %d Directories, %d Objects, %d Do_Updates. Updates: %d Directories, %d Objects %d Clearinghouse. Explanation: The statistics of the transaction log replay. Action: None required. 0x10d0ab71 cds_s_rpcbindingexport Severity: Error Component: cds / cds_svc_general Text: Routine rpc_ns_binding_export(3rpc) failed: status = %ld.
Error Messages and Status Codes Severity: Error Component: cds / cds_svc_general Text: Routine rpc_ns_binding_unexport(3rpc) failed: status = %ld. Explanation: A call to the system function rpc_ns_binding_unexport(3rpc) failed. Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab65 cds_s_rpcinqbindings Severity: Error Component: cds / cds_svc_general Text: Routine rpc_server_inq_bindings(3rpc) failed : status = %ld.
OSF DCE Problem Determination Guide Explanation: A call to the function rpc_ep_resolve_binding(3rpc) failed. Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab5f cds_s_rpcserverlisten Severity: Error Component: cds / cds_svc_general Text: Routine lrpc_server_listen(3rpc) failed : status = %ld. Explanation: A call to the function rpc_server_listen(3rpc) has failed. Action: See the indicated status code for additional detail.
Error Messages and Status Codes 0x10d0ab69 cds_s_rpcstringtobinding Severity: Error Component: cds / cds_svc_general Text: Routine rpc_binding_to_string_binding(3rpc) failed : status = %ld. Explanation: A call to the function rpc_binding_to_string_binding(3rpc) failed. Action: See the indicated status code for additional detail. The status codes are documented in this manual.
OSF DCE Problem Determination Guide Severity: Notice Component: cds / cds_svc_general Text: Routine rpc_server_use_all_protseqs(3rpc) failed: status = %ld. Explanation: A call to the function rpc_server_use_all_protseqs(3rpc) failed. Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab76 cds_s_secidparsename Severity: Error Component: cds / cds_svc_general Text: Routine sec_id_parse_name(3sec) failed : status = %ld.
Error Messages and Status Codes Explanation: A call to the function sec_rgy_pgo_name_to_id(3sec) has failed. Action: See the indicated status code for additional detail. The status codes are documented in this manual. 0x10d0ab74 cds_s_secrgysitebind Severity: Error Component: cds / cds_svc_general Text: Routine sec_rgy_site_bind(3sec) failed on %s: status = %ld. Explanation: A call to the function sec_rgy_site_bind(3sec) has failed. Action: See the indicated status code for additional detail.
OSF DCE Problem Determination Guide Explanation: When adding a cellname as child, a child pointer is created in the parent directory. Action: Verify that you have the proper access to the parent directory for this command. Also check that the parent directory is properly being served.
Error Messages and Status Codes Severity: Error Component: cds / cds_svc_server Text: modify_cell_alias: Not master replica. Explanation: Modification of cell aliases been erroneously directed to a read-only replica of the cell root directory. Action: Report this problem to your DCE supplier. 0x10d0aa7a cds_s_server_aliasnotroot Severity: Error Component: cds / cds_svc_server Text: modify_cell_alias: Not root directory. Explanation: The modify cell alias routine could not locate the cell root directory.
OSF DCE Problem Determination Guide 0x10d0aa4f cds_s_server_badauthz Severity: Error Component: cds / cds_svc_server Text: Invalid authorization service: status code = %d Explanation: An invalid authorization service has been detected. Action: Report this problem to your DCE supplier. 0x10d0aa5a cds_s_server_childupdateevent Severity: Notice Component: cds / cds_svc_server Text: Cannot update child pointer for directory %s: status = %ld.
Error Messages and Status Codes Explanation: A test of the creation timestamp of the new clearinghouse object did not match what CDS reports as the timestamp. The timestamps must match to prevent clearinghouse name collisions. Action: A non-standard configuration of the cell root directory’s replica set can cause this problem. Assure that all replicas of the cell root directory are accounted for and are in the current replica set.
OSF DCE Problem Determination Guide Action: Either choose a different clearinghouse name or delete the existing object with the same name. 0x10d0aa46 cds_s_server_crecleskulk Severity: Error Component: cds / cds_svc_server Text: Create clearinghouse failed. Skulk failed on root directory: status = %ld. Explanation: Error occured due while trying to skulk the root directory. Action: Determine the cause of skulk failure, fix it, and attempt to create the clearinghouse again.
Error Messages and Status Codes Action: None required. 0x10d0aa50 cds_s_server_dbkeytype_a Severity: Fatal Component: cds / cds_svc_server Text: Invalid database keytype at line %d file %s. Explanation: An invalid keytype was found in the database. The server will abort and dump a core file. Action: Report this problem to your DCE supplier. 0x10d0aa51 cds_s_server_dbnodetype_a Severity: Fatal Component: cds / cds_svc_server Text: Invalid database node type at line %d file %s.
OSF DCE Problem Determination Guide Severity: Error Component: cds / cds_svc_server Text: Cannot auto-enable CDS server. Explanation: The server failed to enable the clearinghouse and communications support. Action: See the servicability log for more information on the error. 0x10d0aa30 cds_s_server_exportfail_eb Severity: Fatal Component: cds / cds_svc_server Text: Cannot export bindings to clearinghouse. Explanation: Error occured trying the export.
Error Messages and Status Codes Text: Error trying to load a clearinghouse from disk into memory: status = %ld. Explanation: An attempt to load a clearinghouse into memory failed. Action: See prior messages for additional detail regarding the failure. Correct the problem and restart the server. 0x10d0aa39 cds_s_server_lseek Severity: Error Component: cds / cds_svc_server Text: Unable to access file %s: status = %ld. Explanation: A call to the system function lseek(2) has failed.
OSF DCE Problem Determination Guide Action: See the open(2) manual page for further details. 0x10d0aa56 cds_s_server_pathbrokenevent Severity: Notice Component: cds / cds_svc_server Text: A lookup on parent directory %s failed. Explanation: Server event ’Broken-Lookup-Paths’ has occurred. A lookup on the directory name returned unknownentry. Action: Make sure the server has read permissions on the directory. If the name has changed, add a softlink pointing to the new directory name.
Error Messages and Status Codes 0x10d0aa55 cds_s_server_rootlostevent Severity: Notice Component: cds / cds_svc_server Text: A copy of the root directory not found in clearinghouse %s. Explanation: Server event ’Root-Lost’ has occured. Root directory not replicated in this clearinghouse. Action: Add a copy of the root to the clearinhouse. 0x10d0aa32 cds_s_server_rpc_eb Severity: Fatal Component: cds / cds_svc_server Text: Initialization of RPC interface has failed.
OSF DCE Problem Determination Guide Text: The call to the setrlimit(2) routine has failed: error=%s Explanation: The call to the system function setrlimit(2) has failed. Action: See the setrlimit(2) manual page for further details. 0x10d0aa54 cds_s_server_skulkfailedevent Severity: Notice Component: cds / cds_svc_server Text: A skulk failed for directory %s: status = %ld. Explanation: A skulk operation failed. Action: See the indicated status code for additional detail.
Error Messages and Status Codes Severity: Warning Component: cds / cds_svc_server Text: The timestamp on a new update is older than CDS_AllUpTo. Attribute =%s, CDS_AllUpTo = %s, Update Timestamp = %s. Explanation: An new update with a timestamp older then allupto was received. The skulk operation will fail. Action: Use the cdscp set dir to new epoch command to correct the problem.
OSF DCE Problem Determination Guide Action: Report this problem to your DCE supplier. 0x10d0ab9d cds_s_site_bind Severity: Error Component: cds / cds_svc_general Text: sec_rgy_site_bind returned status %ld : %s Explanation: A call to sec_rgy_site_bind has failed. Action: Refer to explanation for returned status from sec_rgy_site_bind 0x10d0ab5a cds_s_svc_routing_eb Severity: Error Component: cds / cds_svc_general Text: Unable to set message routing from command line argument : status = %ld.
Error Messages and Status Codes Severity: Varies Component: cds Text: Timeout occurred; operation may have completed Explanation: A modify operation was not completed by the clerk in the specified time. Action: Check the results of the operation, and try again if not done. 0x10d0a3f0 CDS_TIMEOUTNOTDONE Severity: Varies Component: cds Text: Timeout occurred; operation not performed Explanation: A read operation was not completed by the clerk in the specified time. Action: Retry the operation.
OSF DCE Problem Determination Guide Explanation: The server principal on the requesting server has insufficient CDS permissions to a clearinghouse that stores the name the server was trying to access. Action: Have your namespace administrator (or the manager of the server on which the clearinghouse resides) grant the server principal on the requesting server the permissions it requires to perform the requested operation.
Error Messages and Status Codes Action: Verify the file exists. Correct the input file name. 0x10f6100b csrc_s_cannot_open_logfile Severity: Unknown Component: csr / csr_s_general Text: Can’t open ’%s’ for logging, %s.\n Explanation: The specified log file was unable to be opened, because of an incorrect pathname. Action: Correct the pathname to the file, and try again. 0x10f6100a csrc_s_cannot_open_output Severity: Unknown Component: csr / csr_s_general Text: Can’t open ’%s’ for output, %s.
OSF DCE Problem Determination Guide Severity: Unknown Component: csr / csr_s_syntax Text: Missing ’%s’ field.\n Explanation: A required field is missing. Action: All values and text pairs are required for a code set field_list. Add the missing field. Check the csrc man page for complete information on each field. 0x10f6100c csrc_s_no_memory Severity: Unknown Component: csr / csr_s_general Text: Cannot allocate the required memory.
Error Messages and Status Codes Text: Header type is incorrectly specified. Explanation: An attempt was made to create a database while specifying an incorrect header type. Action: When creating a database, set the flags parameter of dce_db_open() to have either db_c_std_header or db_c_acl_header or neither (meaning no header). 0x14601004 db_s_bad_index_type Severity: Varies Component: lib Text: Index type is not known or incorrectly specified.
OSF DCE Problem Determination Guide Severity: Varies Component: lib Text: Operation is not allowed while iterating Explanation: A call to either a function that alters a backing store (a store or delete operation) or one that starts another iteration was attempted while iterating. This is not allowed. Action: Do not call routines that alter the backing store or nest iterations while in an iteration loop.
Error Messages and Status Codes Explanation: An attempt was made to fetch a header from a database that was created without headers for the objects/records. Action: Do not call dce_db_header_fetch() on this database. 0x14601003 db_s_no_more Severity: Varies Component: lib Text: No more entries to iterate over Explanation: The dce_db_iter_next() function passed the last entry in the database.
OSF DCE Problem Determination Guide Action: Do not call dce_db_header_set(). This database was created without the standard header, so it cannot be set. 0x14601009 db_s_open_already_exists Severity: Varies Component: lib Text: Database creat failure - data file already exists Explanation: When attempting to open a database with the db_c_create flag, the specified database file was found to already exist.
Error Messages and Status Codes Action: Either open the database without db_c_readonly in the flags parameter, or do not try to modify it. 0x1460100d db_s_store_failed Severity: Varies Component: lib Text: Database store failure Explanation: The underlying database-store procedure failed for some reason. The global variable errno may provide more specific information. Action: The global variable errno may indicate what action to take.
OSF DCE Problem Determination Guide Severity: Varies Component: lib Text: Cannot allocate memory Explanation: Memory allocation operation failed Action: Check memory limits on your machine, and increase available memory, if possible.
Error Messages and Status Codes Explanation: Unable to allocate sufficient memory to return value. Action: Increase the swap or paging space or acquire more physical memory. Also check the program for bugs that resulted in bad pointers corrupting the heap allocation area. 0x00000000 dce_cf_st_ok Severity: Varies Component: cfg Text: Successful completion Explanation: Requested configuration routine succeeded. Action: None required.
OSF DCE Problem Determination Guide Explanation: The code set registry ID value rgy_code_set_value passed to an rpc_rgy_* or dce_cs_ routine did not have a corresponding locale code set name. This implies the code set is not supported in your environment. Action: Application dependent. 0x16c9a11f dce_cs_c_ok Severity: Varies Component: rpc Text: Code set registry access succeeded. Explanation: Code set registry access operation succeeded. Action: None required.
Error Messages and Status Codes 0x113db322 dced_s_attr_bad_encoding_type Severity: Error Component: dhd / dhd_s_xattrschema Text: Invalid encoding type specified Explanation: The attribute encoding type in a scheme_entry to be created is invalid. Action: Check the valid encoding types and make sure to specify a correct one.
OSF DCE Problem Determination Guide Action: Check the binding infomation and make sure it’s completed and correct. 0x113db328 dced_s_attr_bad_trig_types Severity: Error Component: dhd / dhd_s_xattrschema Text: Invalid trigger type specified Explanation: The trigger type in a scheme_entry to be created is invalid. Action: Check the available trigger types and use a correct one.
Error Messages and Status Codes Severity: Varies Component: dhd Text: Invalid key data has been supplied Explanation: Either the key type is invalid, or a plain key value was missing. Action: Make sure the key data is correct. 0x113db0ed dced_s_bad_keydir Severity: Fatal Component: dhd / dhd_s_general Text: Pre-authentication directory bad Explanation: The pre-authentication key directory var/security/preauth does not exist, is not a directory owned by root in group zero, or does not have mode 0711.
OSF DCE Problem Determination Guide Text: Failed to remove file belonging to dced object Explanation: When attempting to remove a file referred to by the dced object, a failure occurred. Action: Ensure that the storage_tag field of the id paramater refers to an existing file, and that the file and directory in which it resides is accessible to the dced process.
Error Messages and Status Codes Explanation: The server appears to have been started by dced, but the requested data could not be obtained. Action: Check for error reports from dced. 0x113db0ca dced_s_import_already_exists Severity: Varies Component: dhd Text: Failed to find file on dced import attempt Explanation: When attempting to create a dced object specifying that the file not be imported, the file was found. A file cannot exist when specifying no import.
OSF DCE Problem Determination Guide Explanation: An attempt was made to add a key with version 0 (zero) to a key table. This is not allowed. Action: Do not add a key with version 0. You may use the change operation with version 0, which will also update the security registry.
Error Messages and Status Codes Action: Check the data structure and correct the error. 0x113db06f dced_s_need_one_server_prin Severity: Error Component: dhd / dhd_s_general Text: Exactly one server principal required Explanation: Exactly one server principal is required to be in the principal list in the server_t structure that is accessd by dce_server_sec_begin(). Either zero or more than one were found.
OSF DCE Problem Determination Guide Action: If you do not need postprocessrs, no action necessary. If you need them, create the postprocessors object in the hostdata database (with the well-know UUID and name) and create the corresponding file. 0x113db070 dced_s_no_server_keyfile Severity: Error Component: dhd / dhd_s_general Text: Server keytab file name not found Explanation: A server keytab file name was not found by dce_server_sec_begin().
Error Messages and Status Codes Action: Examine the post-processor and take the appropriate corrective action. 0x113db12d dced_s_postprocessor_file_fail Severity: Varies Component: dhd Text: Failed to open the hostdata postprocessor list file Explanation: The hostdata postprocessor list file could not be opened. The global variable errno may provide more specific information.
OSF DCE Problem Determination Guide Action: The global variable errno may provide more specific information. 0x113db1f4 dced_s_sc_invalid_attr_type Severity: Varies Component: dhd Text: Invalid attribute trying to start server Explanation: While trying to start a server, dced found an invalid attribute, or an attribute that has an invalid type. Action: Verify that all the attributes in the srvrconf object are correct. For example, the environment attribute must be a string array.
Error Messages and Status Codes Action: No action necessary. Do not try to enable the secval service unless it is disabled. 0x113db2bd dced_s_sv_not_enabled Severity: Varies Component: dhd Text: secval service is not enabled Explanation: The secval service is not enabled. Action: No action necessary. Do not try to disable the secval service unless it is enabled.
OSF DCE Problem Determination Guide Explanation: The dced service requested is unknown. Action: Use only available dced services. 0x1131f30e dcp_s_acl_entry_already_exists Severity: Varies Component: dcp Text: ACL entry exists. Explanation: The entry specified to be added already exists. Action: Invoke the acl show operation for a list of existing ACL entries. Reenter the command with a new ACL entry or change the existing one.
Error Messages and Status Codes Severity: Varies Component: dcp Text: Invalid ACL entry type. Explanation: The ACL entry type specified failed validation. Action: Reenter the command with a valid ACL entry type. 0x1131f305 dcp_s_acl_inv_mask_option_value Severity: Varies Component: dcp Text: Invalid ’-mask’ option value. Explanation: A value other than nocalc or calc was used with -mask option. Action: Reenter the command with a value of nocalc or calc for the -mask option.
OSF DCE Problem Determination Guide 0x1131f310 dcp_s_acl_no_acl_replace_op Severity: Varies Component: dcp Text: The ’-acl’ option is required. Explanation: An attempt was made to replace an entire ACL, but no ACL entries were included with the -acl option. Action: Reenter the command with entries from the -acl option. 0x1131f304 dcp_s_acl_no_mask_with_option Severity: Varies Component: dcp Text: Mask option used without ’-add’ or ’-change’ option.
Error Messages and Status Codes Action: Reenter the command with no duplicate entries on the -acl option. 0x1131f308 dcp_s_acl_would_grant_perms Severity: Varies Component: dcp Text: Unintended permissions not granted. Explanation: An attempt was made to modify an ACL that would grant some new right without using the -mask option. Action: Reenter the command with -mask option.
OSF DCE Problem Determination Guide Severity: Varies Component: dcp Text: Could not get event classes. Explanation: Could not get the list of event classes from the daemon. Action: Check to see if ther audit daemon is functioning. 0x1131f33f dcp_s_audfilter_create_need_attr Severity: Varies Component: dcp Text: The ’-attribute’ option is required. Explanation: The user did not specify the required option -attribute. Action: Retype the command with the -attribute option.
Error Messages and Status Codes 0x1131f332 dcp_s_audfilter_invalid_type Severity: Varies Component: dcp Text: The filter type ’%s’ is not valid. Explanation: The supplied filter type is not valid. Action: Retype the command with a valid filter type. 0x1131f33c dcp_s_audfilter_modify_need_option Severity: Varies Component: dcp Text: At least one of the options ’-add’ or ’-remove’ is required. Explanation: The user did not specify one of the required options.
OSF DCE Problem Determination Guide Explanation: The system call to read from the daemon identity file on the local filesystem for reading failed. Action: Check to see if the specified file exists and is not empty. The audit daemon creates this file upon startup. Check to make sure that the audit daemon is running. 0x1131f327 dcp_s_aud_modify_bad_state Severity: Varies Component: dcp Text: The value ’%s’ for the ’state’ attribute is not valid.
Error Messages and Status Codes Action: 0x1131f008 dcp_s_bad_arg Severity: Varies Component: dcp Text: Unrecognized argument ’%s’. Explanation: The command received an unrecognized argument. Action: Retype the command with correct arguments. 0x1131f00b dcp_s_bad_arg_list Severity: Varies Component: dcp Text: Command does not accept a list of names as argument. Explanation: A list was provided to a command that requires a single value. Action: Retype the command with correct arguments.
OSF DCE Problem Determination Guide Explanation: Setting the signal action failed. Action: Make sure that Tcl is built correctly for your system. 0x1131f0f8 dcp_s_cadump_fail Severity: Varies Component: dcp Text: The cache dump failed in an indeterminstic mode. Explanation: The cadump routine, called by the cdscache dump\O command, does not provide information to the calling function with regard to failure mode. Action: Contact the administrator.
Error Messages and Status Codes Action: Reenter the command. It may be possible to remove the entire attribute. 0x1131f0ed dcp_s_cds_cache_show Severity: Varies Component: dcp Text: No clearinghouse or a server. Explanation: The show operation requires the -server or -clearinghouse option. Action: Reenter the command with either the -server or -clearinghouse option. 0x1131f0b1 dcp_s_cds_dir_created Severity: Varies Component: dcp Text: The directory ’%s’ was created.
OSF DCE Problem Determination Guide Explanation: The function attempted to format a list of cds attributes when no attributes existed in the list. Action: Verify that attribute entries exist for the object specified. 0x1131f0eb dcp_s_cds_no_cache_name Severity: Varies Component: dcp Text: No cache name specified Explanation: The operation requires a cache name. Action: Reenter the command with a cache name.
Error Messages and Status Codes Severity: Varies Component: dcp Text: Clearinghouse name not provided. Explanation: The operation requires the -clearinghouse option. Action: Retype the command with the -clearinghouse option. 0x1131f0b8 dcp_s_cds_no_dir_mod_operation Severity: Varies Component: dcp Text: Option not specified. Explanation: The directory modify command requires one or more options. Action: Retype the command with one or more of the following options: -add, -remove, or -change..
OSF DCE Problem Determination Guide Explanation: The -to option is required with the link create command. Action: Retype the command with the required -to option. 0x1131f0e8 dcp_s_cds_no_member Severity: Varies Component: dcp Text: Member name not specified. Explanation: The operation requires the -member option. Action: Reenter the command with the -member option. 0x1131f0b6 dcp_s_cds_no_obj_mod_operation Severity: Varies Component: dcp Text: Option not specified.
Error Messages and Status Codes 0x1131f0d0 dcp_s_cds_tree_replica_option Severity: Varies Component: dcp Text: The ’-tree’ option cannot be combined with other options. Explanation: The -replica and -clearinghouse options may not be specified with delete -tree. Action: Retype the command with a consistent set of options. 0x1131f0ba dcp_s_cds_value_no_remove Severity: Varies Component: dcp Text: The ’-value’ option can only be used with the ’-remove’ option.
OSF DCE Problem Determination Guide Text: Explanation: An attempt was made to set the clock immediately to the specified time. The -epoch option requires the -abruptly option. Action: Retype the command with the -abruptly and -epoch options. 0x1131f2d9 dcp_s_clock_set_need_epoch Severity: Varie s Component: dcp Text: Explanation: An attempt was made to set the clock immediately to the specified time. The -abruptly option requires the -epoch option.
Error Messages and Status Codes Action: Please refer to documentation and reenter command with correct key data 0x1131f392 dcp_s_dhd_data_attr_missing Severity: Varies Component: dcp Text: Data attribute is not specified on operation which requires data.
OSF DCE Problem Determination Guide Explanation: The command didn’t supply the object name to operate on. Action: Reenter the command with an object 0x1131f38f dcp_s_dhd_too_many_opts Severity: Varies Component: dcp Text: There are too many options in command line Explanation: User entered incorrect command syntax Action: reenter command 0x1131f393 dcp_s_dhd_wrong_service_req Severity: Varies Component: dcp Text: A wrong ’dced’ server has been requested.
Error Messages and Status Codes 0x1131f2cd dcp_s_dts_time_conversion_fail Severity: Varies Component: dcp Text: Invalid DTS style timestamp. Explanation: Conversion of the entered timestamp failed. Action: Retype the command with a valid timestamp. DTS only uses V1.0 timestamps. 0x1131f011 dcp_s_expected_float_arg Severity: Varies Component: dcp Text: Expected a floating point argument for ’%s’ but received ’%s’. Explanation: The argument was not a valid floating point number.
OSF DCE Problem Determination Guide Action: Use the program interactively to use this command. 0x1131f029 dcp_s_initial_context_fail Severity: Varies Component: dcp Text: Error in getting initial login context. Explanation: A failure occurred attempting to get the intial login context. Action: Check the security service and system resources. 0x1131f379 dcp_s_kt_bad_key_type Severity: Varies Component: dcp Text: keytab only supports ’plain’ or ’des’ key Explanation: The command supplied wrong key type.
Error Messages and Status Codes Text: The list {%s} contains too many elements. Explanation: Action: Retype the command with correct list structure. 0x1131f01d dcp_s_list_too_short Severity: Varies Component: dcp Text: The list {%s} contains too few elements. Explanation: Action: Retype the command with correct list structure. 0x1131f03e dcp_s_login_bad_pw_read Severity: Varies Component: dcp Text: Interactive read of the password failed Explanation: The secure read password call failed.
OSF DCE Problem Determination Guide 0x1131f040 dcp_s_login_local_creds Severity: Varies Component: dcp Text: Credentials obtained from local registry. Explanation: The credentials were obtained from the local registry. Action: 0x1131f03d dcp_s_login_needs_user Severity: Varies Component: dcp Text: The login command requires a username argument Explanation: The user did not supply the required username argument. Action: Retype the command with a valid username.
Error Messages and Status Codes Action: Reenter the command with the -change option. 0x1131f2e6 dcp_s_log_no_server Severity: Varies Component: dcp Text: server process not specified Explanation: The command did not contain the name of a server process to operate on. Action: Reenter the command with a server process 0x1131f244 dcp_s_maxuid_is_negative Severity: Varies Component: dcp Text: The ’maxuid’ attribute must be a positive integer. Explanation: The maxuid attribute must be a positive integer.
OSF DCE Problem Determination Guide Action: Reenter the command and provide a positive mingid integer as an attribute value. 0x1131f24c dcp_s_mingid_not_int Severity: Varies Component: dcp Text: The ’mingid’ attribute must be an integer. Explanation: The mingid attribute provided is not an integer. The mingid attribute must be a positive integer. Action: Reenter the command and provide a positive mingid integer as an attribute value.
Error Messages and Status Codes Explanation: The minorgid attribute must be a positive integer less than the maximum allowed for a 32 bit integer. Action: Reenter the command and provide a positive minorgid integer, less than the maximum allowed for a 32 bit integer, as an attribute value. 0x1131f24b dcp_s_minuid_is_negative Severity: Varies Component: dcp Text: The ’minuid’ attribute must be a positive integer. Explanation: The minuid attribute must be a positive integer.
OSF DCE Problem Determination Guide Explanation: The options entered for the command cannot be used together. Action: Retype the command with the correct options. 0x1131f018 dcp_s_mutex_init_fail Severity: Varies Component: dcp Text: Mutex initialization failed. Explanation: An attempt to initialize a mutex failed. Action: Check system resources. 0x1131f019 dcp_s_mutex_lock_fail Severity: Varies Component: dcp Text: Mutex lock failed. Explanation: An attempt to lock a mutext failed.
Error Messages and Status Codes Text: Could not allocate memory. Explanation: Ran out of virtual memory. Action: Acquire more memory. 0x1131f044 dcp_s_not_logged_in Severity: Varies Component: dcp Text: You are not logged in to the security service. Explanation: A logout operation was attempted without a login context. Action: Login first. 0x1131f00c dcp_s_null_arg Severity: Varies Component: dcp Text: The empty list is not a valid argument.
OSF DCE Problem Determination Guide Severity: Varies Component: dcp Text: The ’%s’ option requires an integer value. Explanation: Command requires an integer argument. Action: Retype the command with a valid argument. 0x1131f021 dcp_s_opt_requires_more_args Severity: Varies Component: dcp Text: The ’%s’ option requires more arguments. Explanation: The indicated option requires more arguments than were provided. Action: Retype the command with the correct arguments for the options.
Error Messages and Status Codes 0x1131f047 dcp_s_resolve_need_binding Severity: Varies Component: dcp Text: The ’resolve’ command requires a binding as an argument. Explanation: The required binding was not supplied to the resolve command. Action: Retype the command supplying a binding. 0x1131f04a dcp_s_resolve_need_if Severity: Varies Component: dcp Text: The resolve command requires the ’-interface’ option with an interface. Explanation: The required interface was not supplied to the resolve command.
OSF DCE Problem Determination Guide Action: Reenter the command giving a UTC date for the account lifetime. 0x1131f28f dcp_s_rgy_acct_no_group Severity: Varies Component: dcp Text: Required group name attribute not provided. Explanation: The create command requires that a group attribute be supplied with the command. This allows the registry to associate a group with the account.
Error Messages and Status Codes Action: Reissue the command and provide a shorter shell 0x1131f220 dcp_s_rgy_ambig_acl_mgr_name Severity: Varies Component: dcp Text: Ambiguous acl manager name. Explanation: The name specified for the acl manager set is ambiguous. Action: Reenter the command with a correct aclmgr name. 0x1131f21d dcp_s_rgy_ambig_encoding_type Severity: Varies Component: dcp Text: Encoding type is ambiguous. Explanation: The specified encoding type for the schema is ambiguous.
OSF DCE Problem Determination Guide Explanation: The alias attribute requires a single value not a list of values or a void value. Action: Reenter the command and provide a single attribute value. 0x1131f269 dcp_s_rgy_bad_attribute_list Severity: Varies Component: dcp Text: The attribute list syntax is invalid. Explanation: The attribute list syntax was not of the form {attribute value}. Action: The attribute list syntax must be of the form {attribute value}.
Error Messages and Status Codes Action: Reenter the command and provide a single attribute value. 0x1131f212 dcp_s_rgy_bad_gid_attr_val Severity: Varies Component: dcp Text: The ’gid’ attribute requires a single value. Explanation: The gid attribute requires a single value not a list of values or a void value. Action: Reenter the command and provide a single attribute value.
OSF DCE Problem Determination Guide Severity: Varies Component: dcp Text: The ’pwdlife’ attribute requires a single value. Explanation: The pwdlife attribute requires a single value not a list of values or a void value. Action: Reenter the command and provide a single attribute value. 0x1131f216 dcp_s_rgy_bad_pwdminlen_attr_val Severity: Varies Component: dcp Text: The ’pwdminlen’ attribute requires a single value.
Error Messages and Status Codes Explanation: The schema object was not formatted correctly. Action: The schema object takes a list of fully qualified schema names as an argument. Reenter the command with a fully qualified schema name. 0x1131f27f dcp_s_rgy_bad_time_string Severity: Varies Component: dcp Text: Bad time string supplied. Explanation: The time string that was provided is not convertable to a Coordinated Universal Time structure. Action: Reissue the command with an appropriate ISO time string.
OSF DCE Problem Determination Guide 0x1131f20c dcp_s_rgy_con_no_cell_name Severity: Varies Component: dcp Text: No cell name. Explanation: The required cell name that was to be connected to is not supplied. Action: Reissue the command with a cell name to connect to. 0x1131f209 dcp_s_rgy_con_no_cred Severity: Varies Component: dcp Text: Unable to obtain network credentials. Explanation: The connect process was unable to login to the foreign cell.
Error Messages and Status Codes 0x1131f208 dcp_s_rgy_con_no_mypwd Severity: Varies Component: dcp Text: The users password must be supplied. Explanation: The connect verb needs the users password to execute. Action: Reissue the command with the users local password. 0x1131f206 dcp_s_rgy_con_no_org Severity: Varies Component: dcp Text: Local organization not specified. Explanation: The local organization name is required for this command. Action: Reissue the command with the organization name specified.
OSF DCE Problem Determination Guide 0x1131f2ac dcp_s_rgy_era_invalid_authentication Severity: Varies Component: dcp Text: Invalid authentication service. Explanation: The authentication service specified as part of a binding is invalid. Action: Reenter the command with a correct binding. 0x1131f2ad dcp_s_rgy_era_invalid_authorization Severity: Varies Component: dcp Text: Invalid authorization service. Explanation: The authorization service specified as part of a binding is invalid.
Error Messages and Status Codes Action: Reenter the command with an existing extended attribute. 0x1131f297 dcp_s_rgy_era_not_int Severity: Varies Component: dcp Text: Supplied value for extended attribute is not an integer. Explanation: The value of this extended attribute must be an integer. Action: Reenter the command with an integer for the extended attribute.
OSF DCE Problem Determination Guide Text: Binding type of extended attribute is unknown. Explanation: The specified binding type of the extended attribute is unknown. Action: Reenter the command with a known extended attribute binding type. 0x1131f29f dcp_s_rgy_era_unknown_encoding_type Severity: Varies Component: dcp Text: Encoding type of extended attribute is unknown. Explanation: The specified encoding type of the extended attribute is unknown.
Error Messages and Status Codes 0x1131f296 dcp_s_rgy_illegal_attr Severity: Varies Component: dcp Text: Supplied attribute ’%s’ is illegal. Explanation: The specified attribute is illegal. Action: Reenter the command with a valid attribute. 0x1131f21f dcp_s_rgy_invalid_acl_mgr_name Severity: Varies Component: dcp Text: Invalid acl manager name. Explanation: The name specified for the acl manager set is invalid. Action: Reenter the command with a correct aclmgr name.
OSF DCE Problem Determination Guide 0x1131f221 dcp_s_rgy_invalid_intercell_action Severity: Varies Component: dcp Text: Invalid intercell action. Explanation: The value specified for the intercell action is invalid. Action: Reenter the command with a correct intercell action value. 0x1131f225 dcp_s_rgy_invalid_permset_char Severity: Varies Component: dcp Text: Invalid permission string. Explanation: The value specified for the permission string is invalid.
Error Messages and Status Codes Action: Reenter the command with a correct trigger type. 0x1131f268 dcp_s_rgy_list_and_switches Severity: Varies Component: dcp Text: Only options or an attribute list are allowed. Explanation: When modifying or creating an object it is only valid to enter an attribute list or a set of attribute options. Action: Reenter the command specifying either an attribute list or a set of attribute options.
OSF DCE Problem Determination Guide 0x1131f203 dcp_s_rgy_no_fgroup Severity: Varies Component: dcp Text: Foreign group name not specified. Explanation: The foreign group name is required for this command. Action: Reissue the command with the foreign group name specified. 0x1131f266 dcp_s_rgy_no_gid Severity: Varies Component: dcp Text: No ’gid’ specified when attempting to create an alias. Explanation: No gid was specified while attempting to create an alias.
Error Messages and Status Codes Severity: Varies Component: dcp Text: No name provided to rename to. Explanation: A -to name was not provided as an argument to the rename command Action: The user should reissue the command with an appropriate command line option. 0x1131f261 dcp_s_rgy_no_org_name Severity: Varies Component: dcp Text: No organization name. Explanation: The organization object was missing an organization name.
OSF DCE Problem Determination Guide 0x1131f264 dcp_s_rgy_no_schema_name Severity: Varies Component: dcp Text: No schema name. Explanation: The schema object was missing a schema name. Action: The schema object takes a list of schema names as an argument. The names must be fully qualified schema names. 0x1131f265 dcp_s_rgy_no_uid Severity: Varies Component: dcp Text: No ’uid’ specified when attempting to create an alias. Explanation: No uid was specified while attempting to create an alias.
Error Messages and Status Codes Severity: Varies Component: dcp Text: Supplied ’pwdminlen’ must be a positive integer. Explanation: The supplied value of pwdlen is negative. The value should be a positive number. Action: Reenter the command with a positive integer as the value. 0x1131f28b dcp_s_rgy_pwdminlen_not_int Severity: Varies Component: dcp Text: Supplied ’pwdminlen’ is not a positive integer. Explanation: The pwdminlen attribute must be a positive integer.
OSF DCE Problem Determination Guide Action: Reenter the command providing the quota option with a value that is a positive integer, the string value unlimited or less than the maximum size of a 32 bit integer. 0x1131f23d dcp_s_rgy_sa_already_master Severity: Varies Component: dcp Text: Registry replica specified is the master Explanation: The command did not contain the name of a registry slave replica to operate on. Action: Reenter the command with a registry slave replica.
Error Messages and Status Codes Text: Replica ’%s’ contains more up-to-date information. Explanation: The last update sequence number of the specified replica is lower than the other replicas in the cell. Action: Specify the named replica to be the master. Or take care and reenter the command with both -force and -master options. 0x1131f2ae dcp_s_rgy_server_unavailable Severity: Varies Component: dcp Text: Registry server ’%s’ is unavailable.
OSF DCE Problem Determination Guide Explanation: A uuid is only valid when adopting an orphaned principal object. Action: Reenter command specifing only a uuid to adopt an orphan principal object or the alias options to generate an alias to an existing object. 0x1131f07e dcp_s_rpc_bad_priority Severity: Varies Component: dcp Text: Priority out of valid range of 0 to 7. Explanation: The given priority was outside the valid range. Action: Retype the command using a priority value from 0 to 7.
Error Messages and Status Codes 0x1131f084 dcp_s_rpc_member_or_annot Severity: Varies Component: dcp Text: The ’-member’ can only be used with the ’-interface’ option. Explanation: The -member option must be used with the -interface option, and cannot be used with the -default, -priority,or -annotation options. Action: Retype the command with proper options. See the documentation on the rpcprofile remove command for the correct options.
OSF DCE Problem Determination Guide 0x1131f07b dcp_s_rpc_no_interface_id Severity: Varies Component: dcp Text: Interface id not entered Explanation: An interface id must be entered with the -interface option Action: Retype the command with the -interface option and an interface id. 0x1131f07c dcp_s_rpc_no_interface_id_def Severity: Varies Component: dcp Text: Must use ’-interface’ or ’-default’ Explanation: An interface id must be entered if the default profile member is not used.
Error Messages and Status Codes Explanation: The -priority option cannot be combined with other options for the rpcprofile remove command. Action: Retype the command with proper options. 0x1131f083 dcp_s_rpc_uuid_with_others Severity: Varies Component: dcp Text: The ’-uuid’ option cannot be combined with other options. Explanation: The -uuid option cannot be combined with other options for the endpoint show command. Action: Retype the command with proper options.
OSF DCE Problem Determination Guide 0x1131f038 dcp_s_signal_invalid_action Severity: Varies Component: dcp Text: Invalid action ’%s’, should be one of: default, ignore, error, trap, get, block, or unblock. Explanation: The signal command was not given a valid action. Action: Retype the command with a valid signal action. 0x1131f035 dcp_s_signal_invalid_name Severity: Varies Component: dcp Text: Invalid signal name: %s Explanation: The supplied signal name is invalid. Action: Supple a valid signal name.
Error Messages and Status Codes Action: Use only BSD signals. 0x1131f039 dcp_s_signal_takes_no_cmd Severity: Varies Component: dcp Text: A command may not be specified for the ’%s’ action. Explanation: The specified action does not take a command. Action: Retype the command with the correct arguments. 0x1131f037 dcp_s_signal_trap_req_cmd Severity: Varies Component: dcp Text: A command is required for trapping signals. Explanation: The signal trap command was not given a command to execute.
OSF DCE Problem Determination Guide Text: Undefined service flag has been encountered Explanation: There is only one service flag defined -) disabled.
Error Messages and Status Codes 0x1131f032 dcp_s_too_many_signals Severity: Varies Component: dcp Text: Too many signals supplied in list Explanation: The supplied list contained too many signals. Action: Supply a smaller number of signals. 0x1131f307 dcp_s_too_many_types Severity: Varies Component: dcp Text: Too many ACL types. Explanation: More than one ACL type option was given. Action: Reenter the command with only one ACL type option. Valid ACL types are the ACL object itself, -ic, -io, or -entry.
OSF DCE Problem Determination Guide Text: The value ’%s’ is not a valid integer or floating point number. Explanation: The conversion from the string the user typed to an integer or floating point number failed, or was not able to convert the entire string. Action: Retype the command with a valid integer or floating point number. 0x1131f39e dcp_s_utc_bad_rel_time Severity: Varies Component: dcp Text: The value ’%s’ is not a valid relative timestamp.
Error Messages and Status Codes Action: Retype the command with a valid timestamp. 0x1131f3a1 dcp_s_utc_conv_fail Severity: Varies Component: dcp Text: Could not convert the result back to a string. Explanation: The call to convert the result back into a string failed. This may indicate an internal problem. Action: Retype the command with a valid combination of timestamps. 0x1131f3a5 dcp_s_utc_multiply_failed Severity: Varies Component: dcp Text: Timestamp multiplication failed.
OSF DCE Problem Determination Guide 0x1131f005 dcp_s_var_unset_readonly Severity: Varies Component: dcp Text: Error: Cannot unset ’%s’: dcecp convenience variable is read-only Explanation: An attempt was made to unset the value of a convenience variable that is read-only. Action: You cannot unset read-only convenience variables. 0x1131f007 dcp_s_wrong_num_args Severity: Varies Component: dcp Text: Wrong number of arguments, exactly %d arguments are required.
Error Messages and Status Codes Action: None required 0x1708308d deif_err_invalid_entry Severity: Varies Component: sad Text: SEC_ACL_EDIT - invalid entry specification Explanation: ? Action: None required 0x17083092 deif_err_invalid_entry_key Severity: Varies Component: sad Text: SEC_ACL_EDIT - invalid or unknown entry key Explanation: ? Action: None required 0x17083091 deif_err_invalid_entry_op Severity: Varies Component: sad Text: SEC_ACL_EDIT - invalid operation on this entry type Explanation: ? A
OSF DCE Problem Determination Guide Explanation: ? Action: None required 0x17083093 deif_err_rgy_not_found Severity: Varies Component: sad Text: SEC_ACL_EDIT - unable to communicate with registry server Explanation: ? Action: None required ---------- DS_E_ADMIN_LIMIT_EXCEEDED Severity: Error Component: Directory Services Text: Operation cannot be performed within the administrative constraints. Explanation: This is an instance of an OM class DS_C_SERVICE_ERROR.
Error Messages and Status Codes Action: Make sure your aliases always refer to existing objects. ---------- DS_E_ATTRIBUTE_OR_VALUE_EXISTS Severity: Error Component: Directory Services Text: An attempt is made to add an attribute or value that already exists. Explanation: This is an instance of an OM class DS_C_ATTRIBUTE_ERROR. An attempt was made to add an attribute or value that is already present in the Directory entry in question.
OSF DCE Problem Determination Guide that a desired context argument is acceptable for an operation, see that man page for that operation. ---------- DS_E_BAD_NAME Severity: Error Component: Directory Services Text: An invalid name argument was supplied. Explanation: This is an instance of an OM class DS_C_LIBRARY_ERROR. An invalid name argument was supplied. Action: Ensure that the value for the name argument is a valid instance of the OM class DS_C_NAME.
Error Messages and Status Codes ---------- DS_E_CANNOT_ABANDON Severity: Error Component: Directory Services Text: An attempt to abandon an operation has failed. Explanation: This is an instance of an OM class DS_C_ABANDON_FAILED error. An attempt was made to abandon an operation for which this is prohibited, or the abandon could not be performed. The ds_abandon() function is not supported by DCE XDS, thus this error is returned.
OSF DCE Problem Determination Guide a particular entry or set of entries. Action: Make sure that the entry or entries conform to the schema for the DIT. ---------- DS_E_ENTRY_EXISTS Severity: Error Component: Directory Services Text: The name passed to the add entry operation already exists. Explanation: This is an instance of an OM class DS_C_UPDATE_ERROR. The name passed to ds_add_entry() already exists. Action: Correct the name and retry the operation or accept that the entry already exists.
Error Messages and Status Codes Explanation: This is an instance of an OM class DS_C_ATTRIBUTE_PROBLEM. A value presented as an argument does not conform to the attribute syntax for the attribute type. Action: Correct the attribute syntax and retry the operation. ---------- DS_E_INVALID_ATTRIBUTE_VALUE Severity: Error Component: Directory Services Text: The attribute value in the AVA does not conform to the attribute syntax. Explanation: This is an instance of an OM class DS_C_NAME_ERROR.
OSF DCE Problem Determination Guide Explanation: This is an instance of a OM class DS_C_SERVICE_ERROR. A Directory Service Agent (DSA) detected a loop within the Directory. Action: Correct the problem that is creating the loop and retry the operation. ---------- DS_E_MISCELLANEOUS Severity: Error Component: Directory Services Text: A miscellaneous error occurred while interacting with the Directory Service. Explanation: This is an instance of an OM class DS_C_LIBRARY_ERROR.
Error Messages and Status Codes Severity: Error Component: Directory Services Text: An attempt is made to use optional functionality, which is not available in this implementation. Explanation: This is an instance of an OM class DS_C_LIBRARY_ERROR. An attempt was made to use optional functionality, which is not supported in this implementation. This error is also returned if an unrecognized value for the session attribute DS_AUTH_MECHANISM was supplied. Action: None required.
OSF DCE Problem Determination Guide ---------- DS_E_NOT_ALLOWED_ON_RDN Severity: Error Component: Directory Services Text: The modification alters an object’s RDN. Explanation: This is an instance of an OM class DS_C_UPDATE_ERROR. An attempt was made to make a modification that would alter the Relative Distinguished Name (RDN) for an object. Action: This operation is not permitted on an RDN.
Error Messages and Status Codes Action: Increase the scope, address another Directory Service Agent. ---------- DS_E_PROTECTION_REQUIRED Severity: Error Component: Directory Services Text: The Directory Service is unwilling to perform the operation because it is unsigned. Explanation: This is an instance of an OM class DS_E_SECURITY. The Directory Service was unwilling to perform the operation because it is unsigned. Action: Retry the operation signed.
OSF DCE Problem Determination Guide Action: Wait until some sessions have stopped and try again. ---------- DS_E_UNABLE_TO_PROCEED Severity: Error Component: Directory Services Text: The DSA does not have the administrative authority over the particular naming context. Explanation: This is an instance of an OM class DS_C_SERVICE_ERROR. A Directory Service Agent (DSA) without administrative authority over a particular naming context was asked to resolve a name in that context.
Error Messages and Status Codes 0x115ca076 dts_s_acl_create_default Severity: Error Component: dts / dts_s_error Text: Couldn’t create the default DTS ACL: %s Explanation: An attempt to create the deafult DTS ACL failed Action: DCE utilities error. Check utilities codes for more info 0x115ca074 dts_s_acl_dbopen_create Severity: Error Component: dts / dts_s_error Text: Couldn’t create DTS acl database ( %s ): %s Explanation: An attempt to create the DTS ACL database failed Action: DCE utilities error.
OSF DCE Problem Determination Guide 0x115ca079 dts_s_aclv0_unregister Severity: Error Component: dts / dts_s_error Text: Couldn’t unregister the Version 0 rdacl interface from the endpoint map: %s Explanation: An attempt to unregister the DTS rdacl interface failed Action: This is an RPC error.
Error Messages and Status Codes tolerance, DTS gradually adjusts the clock. Action: If you wish to have the clock set abruptly in the future, increase the tolerance. attribute. If you are satisfied with the adjustment, then no action is required. 0x115ca010 dts_s_alloc_virt Severity: Varies Component: dts Text: Memory allocation failure Explanation: An error was encountered when attempting to allocate more memory Action: None required.
OSF DCE Problem Determination Guide 0x115ca0aa dts_s_bad_attr Severity: Warning Component: dts / dts_s_error Text: Invalid configuration attribute %s specified\n Explanation: An unrecognized configuration attribute was passed to dtsd Action: Remove the entry for this attribute 0x115ca0af dts_s_bad_attr_type Severity: Warning Component: dts / dts_s_error Text: Unknown attribute type, associated config attribute not set Explanation: An invalid type was derived for a specified configuration attribute.
Error Messages and Status Codes Explanation: The attempt to open the local binding file failed because of an OS error Action: Check the OS error; fix, and restart 0x115ca061 dts_s_binding_import Severity: Error Component: dts / dts_s_error Text: Binding import from namespace fails: %s Explanation: The initial call to the RPC name space API failed Action: Check namespace based on the returned error message 0x115ca069 dts_s_binding_import_next Severity: Error Component: dts / dts_s_error Text: Failed to r
OSF DCE Problem Determination Guide Text: Couldn’t retrieve this host’s name from the configuration database: %s Explanation: Retrieving the local host’s name from the configuration database failed Action: Probably a configuration error. Fix and restart 0x115ca095 dts_s_cf_profile_name Severity: Error Component: dts / dts_s_error Text: Failure retrieving profile entry from host: %s Explanation: An attempt to retrieve the name of the default profile failed Action: Probably a configuration error.
Error Messages and Status Codes Severity: Warning Component: dts / dts_s_error Text: Failed to unexport Control interface from the namespace: %s Explanation: The RPC call to unregister the Control interface from the namespace failed Action: Delete entry from the namespace; otherwise, nothing 0x115ca025 dts_s_cp_error Severity: Varies Component: dts Text: Error executing command: Explanation: An error occurred executing a dts command.
OSF DCE Problem Determination Guide 0x115ca058 dts_s_dce_error Severity: Error Component: dts / dts_s_events Text: DCE error %s Explanation: DCE error occurred. Action: Verify DCE operation and configuration. 0x115ca04e dts_s_different_epoch Severity: Warning Component: dts / dts_s_general Text: Current epoch %d, differs from epoch %d of server %s Explanation: While attempting a synchronization, a server encountered a server whose epoch number did not match its own.
Error Messages and Status Codes Text: Couldn’t retrieve UUID for server %s from the namespace: %s Explanation: An attempt to retrieve the server’s UUID failed Action: Check the namespace for server’s entry 0x115ca004 dts_s_epoch_range Severity: Varies Component: dts Text: Epoch out of range or not different from current epoch Explanation: An attempt was made to change the epoch, but the number given was out of range Action: Re-enter the command using an integer from 0 to 255 0x115ca08a dts_s_ep_register_c
OSF DCE Problem Determination Guide 0x115ca011 dts_s_error_create Severity: Varies Component: dts Text: An error occurred while creating the time service Explanation: ? Action: Fix and restart. 0x115ca054 dts_server_epoch_changed Severity: Notice Component: dts / dts_s_events Text: Epoch Change completed, old epoch = %d, new epoch = %d Explanation: Time epoch modified. Action: None required.
Error Messages and Status Codes Text: Couldn’t export the ACL manager interface: %s Explanation: An attempt to export the ACL manager interface failed Action: Utilities component error. Check utilties error codes for more information 0x115ca08c dts_s_export_control Severity: Error Component: dts / dts_s_error Text: Failed to export Time Control interface to the namespace: %s Explanation: The RPC call to export the Time Control interface to the namespace failed Action: This is an RPC namespace error.
OSF DCE Problem Determination Guide 0x115ca073 dts_s_fetch_uuid Severity: Error Component: dts / dts_s_error Text: Couldn’t retrieve the ACL for the dtsd: %s Explanation: The utilites call to fetch the dtsd ACL failed Action: DCE utilities error. Check utilities codes for more info 0x115ca05f dts_s_get_cell_name Severity: Error Component: dts / dts_s_error Text: Retrieval of DCE cell name failed: %s Explanation: The dce_cf_get_cell_name() function call failed. Action: Probably a configuration error.
Error Messages and Status Codes Action: None required.
OSF DCE Problem Determination Guide Explanation: The rpc_if_inq_id() function returned a DCE status code indicating failure Action: Determine cause of failure and re-run the command 0x115ca0ab dts_s_invalid_attr_value Severity: Warning Component: dts / dts_s_error Text: An invalid value (%s) was entered for the attribute %s\n Explanation: An invalid or out-of-range value was entered for the specified attribute Action: Fix and restart the dtsd 0x115ca0a9 dts_s_invalid_type Severity: Warning Component: dts
Error Messages and Status Codes Text: dtsd server still isn’t accepting RPC connections after %d seconds Explanation: The dtsd server had not issued an rpc_server_listen() call after the indicated number of seconds Action: Check logs for problems in the dtsd initializing, or failures in other components, such as the directory service 0x115ca034 dts_s_mgt_no_read Severity: Varies Component: dts Text: Must have read permission for the DTS entity Explanation: The attempted operation requires read permission,
OSF DCE Problem Determination Guide Text: Failed to set mutex attributed kind Explanation: An unexpected failure in setting the kind of a mutex ttribute occurred Action: Fix and restart the dtsd 0x115ca0ad dts_s_mutex_init Severity: Fatal Component: dts / dts_s_error Text: Failed to initialize dtsd global data mutex attribute Explanation: An unexpected failure in initializing a mutex occurred Action: Fix and restart the dtsd 0x115ca051 dts_s_no_global_servers Severity: Notice Component: dts / dts_s_event
Error Messages and Status Codes 0x115ca001 dts_s_normal Severity: Varies Component: dts Text: Successful completion Explanation: Operation performed Action: None required. 0x115ca00b dts_s_not_created Severity: Varies Component: dts Text: Time service has not been created Explanation: An attempt was made to issue the dts activate command for a DTS entity; however, the entity has not been created. Action: Create the DTS entity and then issue the dts activate command.
OSF DCE Problem Determination Guide 0x115ca05a dts_s_not_in_group Severity: Warning Component: dts / dts_s_events Text: Server %s not in security group %s Explanation: A global server from a remote cell was added to the local cell profile; however, the name of the server was not added to the securitty group. Action: You must add the name of the server to the /.:/subsys/dce/dts-servers security group using the dcecp security command group add. You must have write permission to edit the registry database.
Error Messages and Status Codes Severity: Error Component: dts / dts_s_error Text: Failed to convert host name to host UUID: %s Explanation: The attempt to retrieve the host UUID using the host name failed Action: This is a Security failure: check security error codes for more information 0x115ca0a0 dts_s_prin_host Severity: Error Component: dts / dts_s_error Text: Couldn’t retrieve machine principal name: %s Explanation: The attempt to retrieve the machine principals name for this host from the configu
OSF DCE Problem Determination Guide 0x115ca021 dts_s_prsact_fatal Severity: Varies Component: dts Text: Fatal error parsing command: Explanation: A fatal error was detected while parsing the specified command Action: None required. 0x115ca01f dts_s_prsfile_fatal Severity: Varies Component: dts Text: Fatal command parser error reading table %s Explanation: A fatal error occured while reading the indicated table. Action: None required.
Error Messages and Status Codes 0x115ca023 dts_s_prs_unknown Severity: Varies Component: dts Text: Unknown fatal command parser error Explanation: An unknown error occurred whilst parsing. Action: None required.
OSF DCE Problem Determination Guide Text: Local clock was not intersecting: local time = %s, computed time = %s. It has been reset. Explanation: During an attempted synchronization, DTS detected that the local clock’s value and its inaccuracy did not intersect with those servers used for synchronization. Since the faulty time interval supplied by the clock was outside the bounds of the attribute tolerance,, DTS immediately resets the clock.
Error Messages and Status Codes Explanation: The security call to automatically change a principal’s key before it expires failed Action: This is a RPC security error.
OSF DCE Problem Determination Guide 0x115ca09b dts_s_service_ep_unreister Severity: Error Component: dts / dts_s_error Text: Failed to unregister Service interface from the endpoint map: %s Explanation: The RPC call to unregister the Service interface from the endpoint map failed Action: This is an RPC error.
Error Messages and Status Codes Text: Failed to set the expiration age for server binding handle: %s Explanation: The call to set the expiration age of the binding handle for the specified server failed Action: This is an RPC failure. Check RPC status code for more info 0x115ca018 dts_s_shut_down Severity: Varies Component: dts Text: The time service has shut down Explanation: The time service has shut down and is not responding to requests. Action: None required.
OSF DCE Problem Determination Guide Severity: Notice Component: dts / dts_s_general Text: Startup completed Explanation: Server initialization done. Action: None required. 0x115ca04d dts_s_startup_done_set Severity: Notice Component: dts / dts_s_general Text: Startup completed Explanation: Server initialization done; clock set. Action: None required.
Error Messages and Status Codes 0x115ca057 dts_s_system_error Severity: Error Component: dts / dts_s_events Text: Local system error %s Explanation: Local operating system error occurred. Action: Verify system operation. 0x115ca04a dts_s_too_few_servers Severity: Warning Component: dts / dts_s_config Text: Too few servers (%ld), need %ld servers Explanation: An attempt was made to synchronize the clocks, but fewer than three servers were available.
OSF DCE Problem Determination Guide 0x115ca082 dts_s_tp_ep_begin Severity: Warning Component: dts / dts_s_error Text: Couldn’t initiate search for Time Provider Interface in endpoint map: %s Explanation: The dtsd couldn’t begin the search for the Time Provider interface in the endpoint map Action: This is an RPC error.
Error Messages and Status Codes Explanation: The RPC call to add the Time Service intreface to the LAN profile failed Action: This is an RPC error.
OSF DCE Problem Determination Guide Text: User reset clock using ’clock set’ Explanation: A synchronization failed because a user issued a ’clock set’ command during the synchronization Action: None necessary.
Error Messages and Status Codes pthread_cond_init pthread_create pthread_mutex_init If returned by the pthread_cond_timedwait routine, the time specified by abstime expired before the event being waited on transpired. Action: In most situations, this is a temporary condition, and later calls to the same routine should complete normally.
OSF DCE Problem Determination Guide ---------- EINVAL Severity: Error Component: Threads Text: Invalid argument Explanation: An invalid argument was supplied to a routine. This error can be returned by a number of pthread routines. Generally, the error occurs in one of the following arguments: abstime attr cond delta interval key mutex thread value Action: Corrective action is dependent on the routine you were calling.
Error Messages and Status Codes Action: None required 0x1708302a ek_err_acct_does_not_exist Severity: Varies Component: sad Text: Account does not exist (Registry Edit Kernel) Explanation: ? Action: None required 0x17083029 ek_err_acct_exists Severity: Varies Component: sad Text: Account already exists (Registry Edit Kernel) Explanation: ? Action: None required 0x17083045 ek_err_attr_bad_enc_type Severity: Varies Component: sad Text: Invalid encoding type (Registry Edit Kernel) Explanation: ? Action:
OSF DCE Problem Determination Guide Explanation: ? Action: None required 0x17083035 ek_err_bad_date Severity: Varies Component: sad Text: Dates must be in the format [yy]yy/mm/dd (Registry Edit Kernel) Explanation: ? Action: None required 0x17083037 ek_err_bad_id Severity: Varies Component: sad Text: UUID is badly formatted or out of range (Registry Edit Kernel) Explanation: ? Action: None required 0x1708303b ek_err_bad_lifespan Severity: Varies Component: sad Text: Lifespan is not a number or in vali
Error Messages and Status Codes Text: Data is too long (Registry Edit Kernel) Explanation: ? Action: None required 0x17083036 ek_err_date_out_of_range Severity: Varies Component: sad Text: Date out of supported range (Registry Edit Kernel) Explanation: ? Action: None required 0x17083030 ek_err_fullname_too_long Severity: Varies Component: sad Text: Full name text is too long (Registry Edit Kernel) Explanation: ? Action: None required 0x17083042 ek_err_g_mbr_unauth Severity: Varies Component: sad Text:
OSF DCE Problem Determination Guide Severity: Varies Component: sad Text: Group already exists (Registry Edit Kernel) Explanation: ? Action: None required 0x17083018 ek_err_group_name_too_long Severity: Varies Component: sad Text: Group name too long (Registry Edit Kernel) Explanation: ? Action: None required 0x17083032 ek_err_homedir_too_long Severity: Varies Component: sad Text: Home directory pathname text is too long (Registry Edit Kernel) Explanation: ? Action: None required 0x17083038 ek_err_id_
Error Messages and Status Codes 0x1708303c ek_err_lifespan_out_of_range Severity: Varies Component: sad Text: Lifespan out of range (Registry Edit Kernel) Explanation: ? Action: None required 0x17083028 ek_err_login_name_too_long Severity: Varies Component: sad Text: Account name is too long (Registry Edit Kernel) Explanation: ? Action: None required 0x17083031 ek_err_misc_info_too_long Severity: Varies Component: sad Text: Miscellaneous info text is too long (Registry Edit Kernel) Explanation: ? Acti
OSF DCE Problem Determination Guide Action: None required 0x17083020 ek_err_not_member_group Severity: Varies Component: sad Text: Principal is not a member of specified group (Registry Edit kernel) Explanation: ? Action: None required 0x17083021 ek_err_not_member_org Severity: Varies Component: sad Text: Principal is not a member of specified org (Registry Edit Kernel) Explanation: ? Action: None required 0x17083026 ek_err_no_wildcard Severity: Varies Component: sad Text: Wildcards are not allowed in
Error Messages and Status Codes Explanation: ? Action: None required 0x1708301f ek_err_org_does_not_exist Severity: Varies Component: sad Text: Organization does not exist (Registry Edit Kernel) Explanation: ? Action: None required 0x1708301c ek_err_org_exists Severity: Varies Component: sad Text: Organization already exists (Registry Edit Kernel) Explanation: ? Action: None required 0x17083019 ek_err_org_name_too_long Severity: Varies Component: sad Text: Organization name too long (Registry Edit Ker
OSF DCE Problem Determination Guide Text: ek_err_PAD8 Explanation: ? Action: None required 0x1708304b ek_err_PAD9 Severity: Varies Component: sad Text: ek_err_PAD9 Explanation: ? Action: None required 0x1708304c ek_err_PADa Severity: Varies Component: sad Text: ek_err_PADa Explanation: ? Action: None required 0x1708304d ek_err_PADb Severity: Varies Component: sad Text: ek_err_PADb Explanation: ? Action: None required 0x1708304e ek_err_PADc Severity: Varies Component: sad Text: ek_err_PADc Explanatio
Error Messages and Status Codes Severity: Varies Component: sad Text: ek_err_PADe Explanation: ? Action: None required 0x17083051 ek_err_PADf Severity: Varies Component: sad Text: ek_err_PADf Explanation: ? Action: None required 0x1708302b ek_err_passwd_invalid Severity: Varies Component: sad Text: Invalid password (Registry Edit Kernel) Explanation: ? Action: None required 0x1708302e ek_err_passwd_non_alpha Severity: Varies Component: sad Text: Passwords must contain at least one non-alphanumeric c
OSF DCE Problem Determination Guide 0x1708302c ek_err_passwd_too_short Severity: Varies Component: sad Text: Password is too short (Registry Edit Kernel) Explanation: ? Action: None required 0x17083014 ek_err_person_bad_name_chars Severity: Varies Component: sad Text: Principal name contains an illegal character (Registry Edit Kernel) Explanation: ? Action: None required 0x1708301d ek_err_person_does_not_exist Severity: Varies Component: sad Text: Principal does not exist (Registry Edit Kernel) Explan
Error Messages and Status Codes 0x17083033 ek_err_shell_too_long Severity: Varies Component: sad Text: Shell text too long (Registry Edit Kernel) Explanation: ? Action: None required 0x17083034 ek_err_unix_acct_exists Severity: Varies Component: sad Text: Only one account per principal allowed (Registry Edit Kernel) Explanation: ? Action: None required 0x17083025 ek_err_unix_num_change Severity: Varies Component: sad Text: Unix id changed or incorrect (Registry Edit Kernel) Explanation: ? Action: None
OSF DCE Problem Determination Guide 0x17083004 ek_field_unused Severity: Varies Component: sad Text: Specified field is not in use in this operation (Registry Edit Kernel) Explanation: ? Action: None required 0x17083009 ek_kernel_failure Severity: Varies Component: sad Text: Fatal internal error (Registry Edit Kernel) Explanation: ? Action: None required 0x1708305e ek_misc_acct_partial_op Severity: Varies Component: sad Text: Operation involving multiple registry updates was only partially successful
Error Messages and Status Codes Action: None required 0x17083066 ek_misc_chg_auth_plcy Severity: Varies Component: sad Text: Unable to change account auth-policy Explanation: ? Action: None required 0x17083061 ek_misc_chg_gmem_fail Severity: Varies Component: sad Text: Unable to add principal to group membership Explanation: ? Action: None required 0x17083060 ek_misc_chg_name_fail Severity: Varies Component: sad Text: Unable to change account name Explanation: ? Action: None required 0x17083062 ek_mis
OSF DCE Problem Determination Guide Explanation: ? Action: None required 0x1708305d ek_misc_is_an_alias Severity: Varies Component: sad Text: Entry is an alias (Registry Edit Kernel) Explanation: ? Action: None required 0x17083059 ek_misc_no_members Severity: Varies Component: sad Text: No membership info exists for the specified PGO object (Registry Edit Kernel) Explanation: ? Action: None required 0x17083057 ek_misc_no_more_entries Severity: Varies Component: sad Text: No more matching entries (Regi
Error Messages and Status Codes Text: Operation not yet implemented (Registry Edit Kernel) Explanation: ? Action: None required 0x17083053 ek_misc_no_update_site Severity: Varies Component: sad Text: Master Registry server unavailable (Registry Edit Kernel) Explanation: ? Action: None required 0x17083058 ek_misc_object_not_found Severity: Varies Component: sad Text: Entry not found (Registry Edit Kernel) Explanation: ? Action: None required 0x17083067 ek_misc_PAD7 Severity: Varies Component: sad Text:
OSF DCE Problem Determination Guide Severity: Varies Component: sad Text: ek_misc_PADa Explanation: ? Action: None required 0x1708306b ek_misc_PADb Severity: Varies Component: sad Text: ek_misc_PADb Explanation: ? Action: None required 0x1708306c ek_misc_PADc Severity: Varies Component: sad Text: ek_misc_PADc Explanation: ? Action: None required 0x1708306d ek_misc_PADd Severity: Varies Component: sad Text: ek_misc_PADd Explanation: ? Action: None required 0x1708306e ek_misc_PADe Severity: Varies Co
Error Messages and Status Codes 0x17083055 ek_misc_read_only Severity: Varies Component: sad Text: Registry is read only or operation performed at a slave (Registry Edit Kernel) Explanation: ? Action: None required 0x17083054 ek_misc_server_unavailable Severity: Varies Component: sad Text: Registry server unavailable (Registry Edit Kernel) Explanation: ? Action: None required 0x1708305f ek_misc_unauth_binding Severity: Varies Component: sad Text: Cant establish authentication to registry (Registry Edi
OSF DCE Problem Determination Guide 0x1708300c ek_PAD2 Severity: Varies Component: sad Text: ek_PAD2 Explanation: ? Action: None required 0x1708300d ek_PAD3 Severity: Varies Component: sad Text: ek_PAD3 Explanation: ? Action: None required 0x1708300e ek_PAD4 Severity: Varies Component: sad Text: ek_PAD4 Explanation: ? Action: None required 0x1708300f ek_PAD5 Severity: Varies Component: sad Text: ek_PAD5 Explanation: ? Action: None required 0x17083010 ek_PAD6 Severity: Varies Component: sad Text: e
Error Messages and Status Codes 0x17083012 ek_PAD8 Severity: Varies Component: sad Text: ek_PAD8 Explanation: ? Action: None required 0x17083013 ek_PAD9 Severity: Varies Component: sad Text: ek_PAD9 Explanation: ? Action: None required 0x17083003 ek_required_field Severity: Varies Component: sad Text: Kernel operation invoked on incomplete data set (Registry Edit Kernel) Explanation: ? Action: None required ---------- ENOMEM Severity: Fatal Component: Threads Text: Not enough space Explanation: An att
OSF DCE Problem Determination Guide pri_rr_mid= (PRI_RR_MIN + PRI_RR_MAX)/2 If the error is the result of an invalid policy value, correct it to be one of the following: SCHED_FIFO SCHED_RR SCHED_OTEHR SCHED_FG_NP SCHED_BG_NP ---------- EPERM Severity: Error Component: Threads Text: Operation not permitted Explanation: An attempt was made to set or change the priority or policy for a thread, but the caller does not have the appropriate privileges to do so.
Error Messages and Status Codes Text: Endpoint database already open by another process Explanation: The endpoint mapper could not open the existing database file that holds the endpoint map because another process had the file locked. Action: Make sure no other endpoint mapper is running on the same system.
OSF DCE Problem Determination Guide Explanation: An entry supplied as input to a remote call to the endpoint mapper (for example, for deletion) does not exist in the endpoint map. Action: Supply only existing entries when deleting. 0x16c9a0d4 ept_s_update_failed Severity: Varies Component: rpc Text: Cannot update endpoint database Explanation: The endpoint mapper was unable to write modifications to the database file that holds the endpoint map. Action: Check the permissions on the database file.
Error Messages and Status Codes MUTEX_FAST_NP (default) MUTEX_RECURSIVE_NP MUTEX_NONRECURSIVE ---------- ESRCH Severity: Error Component: Threads Text: No such thread Explanation: The specified thread does not refer to a currently existing thread. This error can be returned for the following routines: pthread_cancel pthread_join pthread_detach pthread_getprio pthread_getscheduler pthread_setprio pthread_setscheduler Action: Correct the thread parameter by naming an existing thread.
OSF DCE Problem Determination Guide 0x1260ad20 gc_i_file_does_not_exist Severity: Warning Component: gds / GDS_S_CP Text: gdscp: File %s does not exist.\n Explanation: The file name specified as the gdscp argument does not exist. Action: Ensure that the file exists with the proper access permissions and try again. 0x1260ad21 gc_i_incorrect_usage Severity: Fatal Component: gds / GDS_S_CP Text: gdscp: Incorrect usage.\n Explanation: gdscp was invoked with invalid arguments.
Error Messages and Status Codes Action: Correct the error in the script files and try again. 0x1260ad06 gc_t_admin_limit_exceeded Severity: Warning Component: gds / GDS_S_CP Text: The administrative limit has been reached. Explanation: The administrative limit of the directory installation has been reached. Action: Contact your system administrator. 0x1260ad02 gc_t_ambiguous_option Severity: Warning Component: gds / GDS_S_CP Text: Ambiguous option %s.
OSF DCE Problem Determination Guide Text: Entry not found. Explanation: No entry was found in the Directory Service Agent that matches the criteria specified in the search operation. Action: Verify the search parameters and try again. 0x1260acfb gc_t_format_error Severity: Warning Component: gds / GDS_S_CP Text: Format error - %s. Explanation: The user-specified value in the string does not conform to the defined syntax.
Error Messages and Status Codes Text: Invalid size limit "%s". Explanation: An invalid size limit was specified. Action: Specify a valid size limit indicating the number of entries to return and try again. 0x1260acf5 gc_t_invalid_time_limit Severity: Warning Component: gds / GDS_S_CP Text: Invalid time limit "%s". Explanation: An invalid time limit was specified. Action: Specify a valid time limit in seconds and try again.
OSF DCE Problem Determination Guide Severity: Warning Component: gds / GDS_S_CP Text: Missing authentication type. Explanation: The authentication type has not been specified in the bind operation. Action: Specify the authentication type and try again. 0x1260ace6 gc_t_missing_directory_id Severity: Warning Component: gds / GDS_S_CP Text: Missing directory identifier. Explanation: The directory identifier has not been specified in the bind operation.
Error Messages and Status Codes 0x1260acec gc_t_missing_psap_address Severity: Warning Component: gds / GDS_S_CP Text: Missing Presentation Service Access Point address. Explanation: The Presentation Service Access Point (PSAP) address of the Directory Service Agent was not specified in the bind operation. Action: Specify the PSAP address and try again. 0x1260acf0 gc_t_missing_scope_of_search Severity: Warning Component: gds / GDS_S_CP Text: Missing scope of search.
OSF DCE Problem Determination Guide Text: Missing password. Explanation: The user password was not specified in the bind operation. Action: Specify the user password and try again. 0x1260acfa gc_t_missing_value Severity: Warning Component: gds / GDS_S_CP Text: Missing value. Explanation: An option was specified without any accompanying value. Action: Specify a valid value and try again. 0x1260ada1 gc_t_om_encoding_invalid Severity: Warning Component: gds / GDS_S_CP Text: Invalid encoded attribute.
Error Messages and Status Codes Severity: Warning Component: gds / GDS_S_CP Text: Could not employ the services of the network. Explanation: Could not employ the services of the network upon which the implementation depends. Action: Contact your system administrator. 0x1260ada6 gc_t_om_no_such_class Severity: Warning Component: gds / GDS_S_CP Text: The class identifier is undefined. Explanation: At the C interface, an invalid class identifier was used. Action: This is an internal XOM error.
OSF DCE Problem Determination Guide 0x1260adab gc_t_om_no_such_syntax Severity: Warning Component: gds / GDS_S_CP Text: The syntax identifier is undefined. Explanation: At the C interface, an invalid syntax identifier was used. Action: This is an internal XOM error. Contact your system administrator. 0x1260adac gc_t_om_no_such_type Severity: Warning Component: gds / GDS_S_CP Text: The type identifier is undefined. Explanation: At the C interface, an invalid type identifier was used.
Error Messages and Status Codes 0x1260adb1 gc_t_om_not_private Severity: Warning Component: gds / GDS_S_CP Text: The object is public and not private. Explanation: At the C interface, a public object was used in place of a private object. Action: This is an internal XOM error. Contact your system administrator. 0x1260adb2 gc_t_om_not_the_services Severity: Warning Component: gds / GDS_S_CP Text: The object is client-generated, rather than service-generated or private.
OSF DCE Problem Determination Guide Text: Temporary difficulty encountered. Explanation: The service encountered a temporary difficulty other than those denoted by other return codes. Action: Contact your system administrator. 0x1260adb7 gc_t_om_too_many_values Severity: Warning Component: gds / GDS_S_CP Text: Too many attribute values. Explanation: Too many attribute values were specified for the object. Action: Reduce the number of values to the defined limit and try again.
Error Messages and Status Codes 0x1260adbc gc_t_om_wrong_value_position Severity: Warning Component: gds / GDS_S_CP Text: Invalid value position. Explanation: At the C interface, the usage of value position identified in the argument of a function was invalid. Action: This is an internal XOM error. Contact your system administrator. 0x1260adbd gc_t_om_wrong_value_syntax Severity: Warning Component: gds / GDS_S_CP Text: Attribute-value syntax not permitted.
OSF DCE Problem Determination Guide Text: Missing OM Class Definition Block. Explanation: An OM Class Definition Block was not specified for the particular OM Class in the XOM object information schema file. Action: Correct the error and try again. 0x1260ad80 gc_t_omx_class_format_error Severity: Warning Component: gds / GDS_S_CP Text: Format error in the OM Class Definition Block.
Error Messages and Status Codes Text: Duplicate OM Class Definition Blocks. Explanation: Duplicate OM Class Definition Blocks were encountered while reading the XOM object information schema file. Action: Since class blocks cannot be duplicated, ensure that all class blocks are unique and try again. 0x1260ad75 gc_t_omx_duplicate_obj_abbrv Severity: Warning Component: gds / GDS_S_CP Text: Duplicate Object Class Abbreviations.
OSF DCE Problem Determination Guide Text: Empty Object Class Definition Block. Explanation: An empty Object Class Definition Block was encountered while reading the XOM object information schema file. Action: Correct the error and try again. 0x1260ad8f gc_t_omx_format_error Severity: Warning Component: gds / GDS_S_CP Text: Format error - %s. Explanation: The user-provided string does not conform to the syntax for the string. Action: Correct the string and try again.
Error Messages and Status Codes Explanation: At the C interface, an invalid function argument was passed. Action: This is an internal error. Contact your system administrator. 0x1260ad87 gc_t_omx_invalid_syntax Severity: Warning Component: gds / GDS_S_CP Text: Invalid OM Syntax. Explanation: An invalid OM syntax was encountered in the XOM object information schema file. Action: Correct the error and try again.
OSF DCE Problem Determination Guide Text: Missing attribute information - %s. Explanation: The attribute type and value was missing in the user-provided string. Action: Reenter the string, using the following format: attribute-type = attribute-value.. 0x1260ad94 gc_t_omx_missing_attr_value Severity: Warning Component: gds / GDS_S_CP Text: Missing attribute value - %s. Explanation: The attribute value was missing in the user-provided string. Action: Reenter the string, providing an attribute value.
Error Messages and Status Codes 0x1260ad9f gc_t_omx_missing_compound_op Severity: Warning Component: gds / GDS_S_CP Text: Missing compound operator - %s. Explanation: A compound operator was not specified in the user-provided string where it was expected. Action: Specify the required compound operator (&& or ||) and try again. 0x1260ad99 gc_t_omx_missing_comp_value Severity: Warning Component: gds / GDS_S_CP Text: Missing component value - %s.
OSF DCE Problem Determination Guide Text: Missing OM Class Name. Explanation: The Class Name was not specified in the OM Class Definition Block of the XOM object information schema file. Action: Correct the error and try again. 0x1260ad78 gc_t_omx_no_end_attr_block Severity: Warning Component: gds / GDS_S_CP Text: Missing end of Attribute Definition Block. Explanation: The end of Attribute Definition Block was missing in the XOM object information schema file. Action: Correct the error and try again.
Error Messages and Status Codes Action: Correct the error and try again. 0x1260ad71 gc_t_omx_no_start_obj_block Severity: Warning Component: gds / GDS_S_CP Text: Missing start of Object Class Definition Block. Explanation: The start of Object Class Definition Block was missing in the XOM object information schema file. Action: Correct the error and try again. 0x1260ad74 gc_t_omx_obj_format_error Severity: Warning Component: gds / GDS_S_CP Text: Format error in the Object Class Definition Block.
OSF DCE Problem Determination Guide Severity: Warning Component: gds / GDS_S_CP Text: Unknown error returned by the XOM convenience library. Explanation: At the C interface to the XOM convenience library, an unknown error was encountered. Action: This is an internal error. Contact your system administrator. 0x1260ad9d gc_t_omx_unknown_keyword Severity: Warning Component: gds / GDS_S_CP Text: Unknown keyword encountered - %s. Explanation: An unknown keyword was encountered in the user-provided string.
Error Messages and Status Codes Action: Set the service controls \L*-automaticcontinuation to TRUE and chainingprohibited to FALSE so that referrals are processed automatically or bind to the referral DSA and perform the operation again. 0x1260ad07 gc_t_size_limit_exceeded Severity: Warning Component: gds / GDS_S_CP Text: Insufficient size limit. Explanation: The size limit specified in the service controls was exceeded. Action: Increase the size limit and try again.
OSF DCE Problem Determination Guide Text: Critical service extension cannot be provided. Explanation: Some part of the Directory Service could not provide a requested critical service extension. Action: Contact your system administrator. 0x1260acf7 gc_t_unknown_argument Severity: Warning Component: gds / GDS_S_CP Text: Unknown argument "%s". Explanation: An unknown argument was specified for the operation. Action: Correct the input and try again.
Error Messages and Status Codes 0x1260a57b GDS_S_ACONTEXT_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: An unknown application context was detected (invalid context-ID = %d) Explanation: Stub process could not detected a valid application context identifier (DAP, DSP) Action: Evaluate the invalid context identifier. Report the problem to the responsible software engineer. 0x1260a8a1 GDS_S_ACQU_CRED_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: Acquire credentials failed for auth.
OSF DCE Problem Determination Guide Explanation: Stub process was not able to read the attribute description file into memory Action: Report the problem to the responsible software engineer. 0x1260aa9c GDS_S_BADAT_ENTRY Severity: Fatal Component: gds / GDS_S_GENERAL Text: The Attribute Table contains an incorrectly formatted entry: %s.\n Explanation: The specified Attribute Table entry is formatted incorrectly.
Error Messages and Status Codes 0x1260a89f GDS_S_BAD_SOUNDEX Severity: Warning Component: gds / GDS_S_GENERAL Text: Active soundex algorithm: %s, Data are generated with soundex algorithm: %s.\n Explanation: The Directory Service Agent (DSA) uses a soundex algorithm, that was not used to generate the data. Action: Go offline and run gdschdb to regenerate the phonetical representations of the data.
OSF DCE Problem Determination Guide Text: Wrong size of hash table file (size = %d, should be %d) Explanation: The program has detected a wrong size of the hash table file. This could indicate a data inconsistency Action: To determine the reason report the problem to the responsible software engineer. In the case of a data inconsistency, restore the database to regain a consistent state.
Error Messages and Status Codes Text: The size of a DUA-cache object entry exceeds the upper limit\n (entry size = %d, upper limit = %d) Explanation: The program has detected a DUA-cache object of a size exceeding the upper (implementation) limit. Action: No action possible. 0x1260a400 GDS_S_CACHE_INVATTRS_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: Invalid attribute specification parameter in IPC-message.
OSF DCE Problem Determination Guide Action: To determine the reason report the problem to the responsible software engineer. 0x1260a3fb GDS_S_CACHE_INVMATCH_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: Invalid attribute matching rule (rule = %d) Explanation: The program has detected an invalid attribute matching rule. Action: To determine the reason report the problem to the responsible software engineer.
Error Messages and Status Codes Text: Invalid storage class parameter (storage class = %d) Explanation: The program has detected an invalid storage class parameter. Action: To determine the reason report the problem to the responsible software engineer. 0x1260a3f6 GDS_S_CACHE_INVVERS_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: Invalid version number (version no. = %d) Explanation: The program has detected an invalid version number.
OSF DCE Problem Determination Guide Action: To determine the reason report the problem to the responsible software engineer. In the case of a data inconsistency, restore the database to regain a consistent state. 0x1260a3f1 GDS_S_CACHE_WAITIN_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: Can’t receive IPC-request message Explanation: The program was not able to receive an IPC-request message. Action: To determine the reason report the IPC-problem to the responsible software engineer.
Error Messages and Status Codes Action: This problem should not occur and cannot be corrected by a user or system administrator. Evaluate errno for the reason. Report the problem to the responsible software engineer. 0x1260a579 GDS_S_CREAD_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: Reading PSAP-address from DUA-cache failed (code = %d, class = %d, value = %d) Explanation: Stub process could not read PSAP-address from DUA-cache Action: Evaluate error values (code, class, value).
OSF DCE Problem Determination Guide Text: A call to dce_svc_debug_routing has failed, error status = %lx, routing specification = %s. Explanation: The program could not set the serviceability debug routing according to the specification.The function has set the specified status. Action: Look up the error status in dcesvcmsg.h. If it indicates a shortage of memory, you could try stopping other functions, perhaps applications. If this doesn’t work, you will need to acquire more memory.
Error Messages and Status Codes Action: No action required. 0x1260a898 GDS_S_ENTRYDSA Severity: Notice Component: gds / GDS_S_GENERAL Text: Entry DSA of Directory ID: %d.\n Explanation: The Directory Service Agent for the specified Directory ID has been started. Action: No action required. 0x1260aa8c GDS_S_ENTRY_GENDB Severity: Notice Component: gds / GDS_S_GENERAL Text: The gdsgendb program started.\n Explanation: The database generation program gdsgendb started. Action: No action required.
OSF DCE Problem Determination Guide Explanation: RPC-server for serviceability has been started Action: No action ! 0x1260a578 GDS_S_ENTRYSTUB Severity: Notice Component: gds / GDS_S_GENERAL Text: Entry Stub of Directory ID: %d Explanation: Stub process for the specified Directory ID has been started Action: No action ! 0x1260aaf0 GDS_S_ENTRY_TRANSFER Severity: Notice Component: gds / GDS_S_GENERAL Text: The gdstransfer started.\n Explanation: The database transfer program gdstransfer started.
Error Messages and Status Codes Explanation: DUA-cache process has been terminated Action: No action ! 0x1260a961 GDS_S_EXIT_DAEMON Severity: Notice Component: gds / GDS_S_GENERAL Text: The gdsdaemon program for Directory ID %d has finished.\n Explanation: The shadow update program gdsdaemon for the specified Directory ID has finished. Action: No action required. 0x1260a899 GDS_S_EXITDSA Severity: Notice Component: gds / GDS_S_GENERAL Text: Exit DSA of Directory ID: %d.
OSF DCE Problem Determination Guide Text: Exit monitor process Explanation: Monitor process has been terminated Action: No action ! 0x1260aaf1 GDS_S_EXIT_TRANSFER Severity: Notice Component: gds / GDS_S_GENERAL Text: The gdstransfer exited.\n Explanation: The database transfer program gdstransfer terminated. Action: No action required. 0x1260a0ca GDS_S_FCLOSE_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: File could not be closed, errno = %d. Explanation: The program could not close a file.
Error Messages and Status Codes Text: File could not be flushed, errno = %d. Explanation: The program could not flush a file. The severity level may vary depending on the context of the error. Action: This problem should not occur and cannot be corrected by a user or system administrator. Evaluate errno for the reason. Report the problem to the responsible software engineer.
OSF DCE Problem Determination Guide Severity: Fatal Component: gds / GDS_S_GENERAL Text: A ftok system call has failed (path =%s, key = %c, errno = %d). Explanation: The program could not perform a ftok operation successfully. Action: Evaluate errno for the reason. Report the problem to the responsible software engineer. 0x1260a0ce GDS_S_FWRITE_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: File could not be written, errno = %d. Explanation: The program could not write a file.
Error Messages and Status Codes 0x1260a8cf GDS_S_ILL_AT_SYNTAX Severity: Warning Component: gds / GDS_S_GENERAL Text: Unknown attribute syntax %d detected. Explanation: The attribute table contains an attribute syntax, that is not known by the DSA. Action: To determine the reason report the problem to the responsible software engineer. In the case of a data inconsistency, restore the database to regain a consistent state.
OSF DCE Problem Determination Guide 0x1260a58b GDS_S_ILLSTATE_EVENT_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: Illegal state/event combination detected (state = %d, event = %d) Explanation: Stub process has detected a state/event combination not described by the state/event table Action: Evaluate state resp. event value. Report the problem to the responsible software engineer.
Error Messages and Status Codes 0x1260a195 GDS_S_INSUFF_INFO Severity: Fatal Component: gds / GDS_S_GENERAL Text: Insufficient information. Variables expected: %d, read: %d. Explanation: The program has tried to read in the specfied number of variables, but found less. Action: Check the input stream. If necessary, restore the database.
OSF DCE Problem Determination Guide 0x1260a583 GDS_S_INVTRANS_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: Invalid transfer type parameter in TP-routine call (transfer type = %d) Explanation: Stub process has detected an invalid transfer type parameter in a TP-routine call. Action: Evaluate the invalid transfer type. Report the problem to the responsible software engineer. 0x1260a582 GDS_S_INVVERSNO_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: Invalid version no.
Error Messages and Status Codes 0x1260a588 GDS_S_IPCEV_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: Can’t get IPC-event description (file descriptor information) Explanation: Stub process was not able to register at IPC. Action: Evaluate error occurring at IPC-level. Report the problem to the responsible software engineer.
OSF DCE Problem Determination Guide 0x1260a45f GDS_S_IPCILNIL_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: Illegal IPC-invoke-PDU length parameter (PDU-length = %d) Explanation: An IPC-function has detected an illegal invoke-PDU length parameter. Action: Evaluate invoke-PDU length parameter. Report the problem to the responsible software engineer.
Error Messages and Status Codes 0x1260a479 GDS_S_IPCLIMDIST_ERR Severity: Notice Component: gds / GDS_S_IPC Text: IPC-distributed command entry limit exceeded (limit = %d) Explanation: An IPC-process cannot send a distributed command because of a resource limitation. Action: Deactivate Directory System. Increase the number of clients (for any directoryID configured) being able to access the Directory System at a time. Activate Directory System.
OSF DCE Problem Determination Guide Action: Evaluate the size. Report the problem to the responsible software engineer. 0x1260a45d GDS_S_IPCMTYPIL_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: Illegal IPC-data fragment parameter (data fragment = %d) Explanation: An IPC-function has detected an illegal data fragment parameter. Action: Evaluate data fragment parameter. Report the problem to the responsible software engineer.
Error Messages and Status Codes Action: Specify a valid parameter value. 0x1260a485 GDS_S_IPCMXHP_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: Illegal ’max. # of IPC-heap buffer entries’ switch value (value = %d ; 0 < value <= %d) Explanation: An illegal parameter value for the -h switch (max. # of heap buffer entries) was detected by the gdsipcinit program. Action: Specify a valid parameter value. 0x1260a480 GDS_S_IPCMXREG_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: Illegal ’max.
OSF DCE Problem Determination Guide Action: Evaluate requested server-ID. Report the problem to the responsible software engineer. 0x1260a465 GDS_S_IPCOPIDIL_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: Illegal IPC-operation-ID parameter (operation-ID = %d) Explanation: An IPC-function has detected an illegal operation-ID parameter. Action: Evaluate operation-ID parameter. Report the problem to the responsible software engineer.
Error Messages and Status Codes Action: Evaluate system problem which is also logged. Report the problem to the responsible software engineer. 0x1260a461 GDS_S_IPCRSTYIL_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: Illegal IPC-result type parameter (result type = %d) Explanation: An IPC-function has detected an illegal result type parameter. Action: Evaluate result type parameter. Report the problem to the responsible software engineer.
OSF DCE Problem Determination Guide Action: Evaluate system problem which is also logged. Report the problem to the responsible software engineer. 0x1260a46c GDS_S_IPCSTATE_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: IPC-function call not allowed in this state (state = %d) Explanation: An IPC-function was called in a state where this isn’t allowed. Action: Evaluate state information. Report the problem to the responsible software engineer.
Error Messages and Status Codes 0x1260a475 GDS_S_IPCTMEX_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: Sending distributed command failed because of time out\n\t\t\t(command = %d, server/process-ID = %d, timeout = %d) Explanation: The IPC-resources could not be allocated successfully because of a system problem. Action: Evaluate system problem which is also logged. Report the problem to the responsible software engineer.
OSF DCE Problem Determination Guide 0x1260a458 GDS_S_IPCVERSIL_ERR Severity: Fatal Component: gds / GDS_S_IPC Text: Illegal IPC-version number parameter (version = %d) Explanation: An IPC-function has detected an illegal version parameter. Action: Evaluate version number parameter. Report the problem to the responsible software engineer.
Error Messages and Status Codes Action: Evaluate iserrno for the reason. Depending on the reason, possible actions are: Deactivate the Directory System. Free up disk space. Grant access right to the directory. Activate the Directory System. Report the problem to the responsible software engineer. 0x1260a8c5 GDS_S_ISCLOSE_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: C-ISAM File could not be closed, iserrno = %d. Explanation: The program could not close a C-ISAM file.
OSF DCE Problem Determination Guide Action: Evaluate iserrno for the reason. Depending on the reason, possible actions are: Deactivate the Directory System. Change the access mode of the C-ISAM file. Restore the database. Activate the Directory System. Report the problem to the responsible software engineer. 0x1260a8c9 GDS_S_ISREAD_ERR Severity: Warning Component: gds / GDS_S_GENERAL Text: C-ISAM-File could not be read with mode %d, iserrno = %d. Explanation: The program could not read a C-ISAM file.
Error Messages and Status Codes Severity: Fatal Component: gds / GDS_S_GENERAL Text: A unique ID could not be generated for a C-ISAM-File, iserrno = %d. Explanation: The program could not generate a unique ID for a C-ISAM file. The severity level may vary depending on the context of the error. Action: Evaluate iserrno for the reason. To determine the reason report the problem to the responsible software engineer. In the case of a data inconsistency, restore the database to regain a consistent state.
OSF DCE Problem Determination Guide Explanation: The maximum index (32767) of the Distinguished Name (DN) list is reached. No more DN-list entries can be added. Action: DN-List entries may be released by deleting attribute values of the Distinguished name syntax or of the ACL syntax. A DN-List entry is not released unless all such attribute values that are represented by the entry are released.
Error Messages and Status Codes Text: A msgrcv system call has failed (errno = %d). Explanation: The program could not perform a msgrcv operation successfully. Action: Evaluate errno for the reason. Report the problem to the responsible software engineer. 0x1260a0e1 GDS_S_MSGSND_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: A msgsnd system call has failed (errno = %d). Explanation: The program could not perform a msgsnd operation successfully. Action: Evaluate errno for the reason.
OSF DCE Problem Determination Guide Severity: Fatal Component: gds / GDS_S_CMX Text: Parser: Syntax error (profile device missing) %s Explanation: The program has detected a syntactically error in the NDS- configuration source file. Action: Provide a correct configuration file.
Error Messages and Status Codes Explanation: The program was not able to detect an international prefix associated to a E.163-address. Action: Provide a correct NDS-configuration file. 0x1260a7ef GDS_S_NDS_E163NP_ERR Severity: Warning Component: gds / GDS_S_CMX Text: National prefix of E.163-address missing Explanation: The program was not able to detect an national prefix associated to a E.163-address. Action: Provide a correct NDS-configuration file.
OSF DCE Problem Determination Guide 0x1260a7f6 GDS_S_NDS_E164NDC_ERR Severity: Warning Component: gds / GDS_S_CMX Text: National destination code (NDC) of E.164-address missing Explanation: The program was not able to detect a national destination code associated to a E.164-address. Action: Provide a correct NSAP-address resp. NDS-configuration file. 0x1260a7f8 GDS_S_NDS_E164V_ERR Severity: Warning Component: gds / GDS_S_CMX Text: Invalid E.
Error Messages and Status Codes Text: Parser: Inconsistent use of interface names (%s != %s) %s Explanation: The program has detected a syntactically error in the NDS- configuration source file. Action: Provide a correct configuration file. 0x1260a81a GDS_S_NDS_LEX_ERR Severity: Fatal Component: gds / GDS_S_CMX Text: Lexical analyser: syntax error %s Explanation: The program has detected a syntactically error in the NDS- configuration source file. Action: Provide a correct configuration file.
OSF DCE Problem Determination Guide Action: Provide a correct configuration file. 0x1260a7e7 GDS_S_NDS_MAC_ERR Severity: Warning Component: gds / GDS_S_CMX Text: MAC-address (ethernet address) missing Explanation: The program was not able to detect a MAC-address associated to a NSAPaddress. Action: Provide a correct NSAP-address.
Error Messages and Status Codes Severity: Fatal Component: gds / GDS_S_CMX Text: Parser: E.164-information missing (e.g. CC/NDC) %s Explanation: The program has detected a syntactically error in the NDS- configuration source file. Action: Provide a correct configuration file. 0x1260a818 GDS_S_NDS_MISPROF_ERR Severity: Fatal Component: gds / GDS_S_CMX Text: Parser: (Sub-)profile information missing %s Explanation: The program has detected a syntactically error in the NDS- configuration source file.
OSF DCE Problem Determination Guide Severity: Fatal Component: gds / GDS_S_CMX Text: Parser: Maximum number of profile descriptions exceeded (maximum = %d) %s Explanation: The program has detected a syntactically error in the NDS- configuration source file. Action: Provide a correct configuration file.
Error Messages and Status Codes Explanation: The program has decreased the number of NSAP-address description entries to a value smaller than the default value. Action: No action ! 0x1260a805 GDS_S_NDS_NETSPACE_ERR Severity: Fatal Component: gds / GDS_S_CMX Text: Parser: Can’t allocate memory for net-address descriptions (%d bytes) %s Explanation: The program was not able to allocate memory for net-address descriptions.
OSF DCE Problem Determination Guide Severity: Fatal Component: gds / GDS_S_CMX Text: Opening of NDS-configuration data base file ’%s’ failed (errno = %d) Explanation: The program was not able to open the NDS-configuration data base file. Action: Evaluate the iserrno error variable for the reason.
Error Messages and Status Codes Explanation: The program has detect an invalid region number associated to a TRANSDATA-address. Action: Provide a correct NSAP-address resp. NDS-configuration file. 0x1260a80b GDS_S_NDS_PROFID_ERR Severity: Fatal Component: gds / GDS_S_CMX Text: Parser: Inconsistent use of profile-ID (%d != %d) %s Explanation: The program has detected a syntactically error in the NDS- configuration source file. Action: Provide a correct configuration file.
OSF DCE Problem Determination Guide 0x1260a810 GDS_S_NDS_REGCOMP_ERR Severity: Fatal Component: gds / GDS_S_CMX Text: Regular expression compilation error (reason = %s (%d)) %s Explanation: The program has detected a syntactically error in the NDS- configuration source file. Action: Provide a correct configuration file.
Error Messages and Status Codes 0x1260a7e9 GDS_S_NDS_SUBID_ERR Severity: Warning Component: gds / GDS_S_CMX Text: Subnetwork-ID missing Explanation: The program was not able to detect a subnetwork identifier associated to a NSAP-address. Action: Provide a correct NSAP-address. 0x1260a7e2 GDS_S_NDS_TPID_ERR Severity: Warning Component: gds / GDS_S_CMX Text: Transport protocol-ID missing Explanation: The program was not able to detect a Transport protocol identifier associated to a NSAP-address.
OSF DCE Problem Determination Guide Text: Invalid switch detected\n \tUSAGE: ndscomp\n \t[-h]\n \t[-n<# of net-address description entries>]\n \t[-o] = verbose mode (1), extended verbose mode (2)\n \t[-P, -w] = serviceability switches\n \t Explanation: The program ndscomp was called with an incorrect syntax.
Error Messages and Status Codes Explanation: The program was not able to allocate work space memory. Action: If possible, specify a smaller work space by means of the -h switch. 0x1260a7eb GDS_S_NDS_X121DCC_ERR Severity: Warning Component: gds / GDS_S_CMX Text: Data country code (DCC)/Data network ID code (DNIC) missing Explanation: The program was not able to detect a data country code/ data network ID code associated to a X.121-address. Action: Provide a correct NSAP-address resp.
OSF DCE Problem Determination Guide 0x1260a7fa GDS_S_NDS_X21V_ERR Severity: Warning Component: gds / GDS_S_CMX Text: Invalid X.21-address (size = %d, %d <= size <= %d) Explanation: The program has detected an invalid X.21-address. Action: Provide a correct X.21-address. 0x1260a7dc GDS_S_NDS_XTI_ERR Severity: Warning Component: gds / GDS_S_CMX Text: No XTI-interface support available Explanation: The program has detected NSAP-addresses associated to an unsupported XTI transport provider.
Error Messages and Status Codes Severity: Fatal Component: gds / GDS_S_GENERAL Text: Invalid data description length parameter in TP-routine call (data description length = %d) Explanation: Stub process has detected an invalid data description length parameter in a TP-routine call. Action: Evaluate the invalid data description length. Report the problem to the responsible software engineer.
OSF DCE Problem Determination Guide gdsgendb but not for gdsdsa, which continues with the unchanged schema. No action required. The problem may also occur, when a corrupted database is restored. In this case it is fatal for the gdsdsa. A consistent database has to be restored in this case. 0x1260aa94 GDS_S_OCT_NAUX_OC_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: Unknown or invalid auxiliary acronym %s.
Error Messages and Status Codes 0x1260a8ce GDS_S_POOL_OPEN_OVFLW Severity: Warning Component: gds / GDS_S_GENERAL Text: Pool of open C-ISAM files is too small. Explanation: An attempt was made by the DSA, to open more than 5 C-ISAM files simultaneously. Action: This problem should not occur and cannot be corrected by a user or system administrator. Report the problem to the responsible software engineer.
OSF DCE Problem Determination Guide use a correct specification for the routing. A correct specification for routing must have the form severity:how:where[:private]. The severity must be one of the following: FATAL ERROR WARNING NOTICE NOTICE_VERBOSE The how field must be one of the following: BINFILE TEXTFILE FILE DISCARD STDOUT STDERR The where field is a filename, that may contain a %ld string, that is replaced by the process ID of the currently running process. The private field is optional.
Error Messages and Status Codes Severity: Notice Component: gds / GDS_S_IPC Text: RPC-server binding info: %s Explanation: If no global name is provided for the RPC-server then the binding information is logged allowing any RPC-client to contact this server. Action: No action ! 0x1260a457 GDS_S_RPC_DISTCMD_ERR Severity: Warning Component: gds / GDS_S_IPC Text: Distributed command failed (cmd = %d, destination = %d, reason = %d) Explanation: A distributed command executed by the RPC-server failed.
OSF DCE Problem Determination Guide Severity: Warning Component: gds / GDS_S_IPC Text: serviceability function call failed (status = %#x) Explanation: A call to a serviceability function failed. Action: Evaluate the status information. Report the problem to the responsible software engineer.
Error Messages and Status Codes Text: An insufficient schema object record was detected.\n Explanation: The schema object record does not contain all the required information. One of the following is missing: The time stamp The number of SRT entries The number of OCT entries The number of AT entries. Action: This problem may occur due to a change to the schema object by an application program, that did not use the schema administration of GDS.
OSF DCE Problem Determination Guide Action: Evaluate errno for the reason. Report the problem to the responsible software engineer. 0x1260a0d8 GDS_S_SEMOP_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: Semaphore operation failed (operation = %d, errno = %d). Explanation: The program could not perform a semaphore operation successfully. Action: Evaluate errno for the reason. Report the problem to the responsible software engineer.
Error Messages and Status Codes 0x1260a190 GDS_S_SIGNAL_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: Signal %d terminates process. Explanation: The program has received the specified signal. Action: The signal is either sent to the process by the system (e. g. segmentation violation) or by a user. Report the problem to the responsible software engineer. in the first case. Forbid the user to send signals in the second case. Reactivate the system.
OSF DCE Problem Determination Guide required. The problem may also occur, when a corrupted database is restored. In this case it is fatal for the gdsdsa. A consistent database has to be restored in this case. 0x1260aa8f GDS_S_SRT_SUP_MISSING Severity: Fatal Component: gds / GDS_S_GENERAL Text: Invalid number %d for superior structure rule.\n Explanation: The Structure Rule Table (SRT) of the administrated schema is in an illegal state. It contains an entry having an illegal superior structure rule number.
Error Messages and Status Codes Text: The program could not delete an entry from an error logfile.\n Explanation: The program gdsdaemon could not delete an entry from it’s internal error logfile SHDERR. Action: Report the problem to the responsible software engineer. 0x1260a972 GDS_S_SUP_DNLIST_REMDSA_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: The program could not retrieve the DSA name for the index %d from the database.
OSF DCE Problem Determination Guide 0x1260a96f GDS_S_SUP_INSUFF_MEM Severity: Fatal Component: gds / GDS_S_GENERAL Text: The program has not allocated enough memory for the update information.\n Explanation: The program gdsdaemon has not allocated enough memory for the shadow update information. Action: Report the problem to the responsible software engineer.
Error Messages and Status Codes 0x1260a971 GDS_S_SUP_OPENDIR_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: The program could not open the directory %s, errno = %d.\n Explanation: The program gdsdaemon could not open the specified directory using the library function opendir. Action: Evaluate errno for the reason. Report the problem to the responsible software engineer.
OSF DCE Problem Determination Guide 0x1260a968 GDS_S_SUP_RESYNC_DSA_ERR Severity: Fatal Component: gds / GDS_S_GENERAL Text: The program could not resynchronize DSA processes.\n Explanation: The program gdsdaemon could not send a distributed command to the Directory Service Agent (DSA) to open a new shadowlogfile. Action: See the fatal error logging of the GDS component ipc for the reason.
Error Messages and Status Codes 0x1260a962 GDS_S_SUP_USAGE Severity: Fatal Component: gds / GDS_S_GENERAL Text: The gdsdaemon program was called with wrong syntax.\n Explanation: The program gdsdaemon was started with illegal parameters.
OSF DCE Problem Determination Guide Deactivate the Directory System. Change the access mode of the program to be executed. Restore the program to be executed. Activate the Directory System. Report the problem to the responsible software engineer. 0x1260a0d6 GDS_S_UNLINK_ERR Severity: Unknown Component: gds / GDS_S_GENERAL Text: The program could not unlink the file %s, errno = %d. Explanation: The program could not unlink the specified file. Action: Evaluate errno for the reason.
Error Messages and Status Codes Text: The supplied principal name is invalid. Explanation: An attempt to access the name failed. Action: Supply a valid name. 0x12862048 gssdce_s_bad_plaintext_padding Severity: Varies Component: gss Text: The token is invalid. It contains invalid padded plaintext. Explanation: The token is invalid. It contains invalid padded plaintext. Action: Application specific. 0x12862039 gssdce_s_bad_signature Severity: Varies Component: gss Text: The token signature was incorrect.
OSF DCE Problem Determination Guide Action: Supply a valid status code. 0x1286201b gssdce_s_bad_usage Severity: Varies Component: gss Text: The credential usage parameter is invalid. Explanation: You specified an invalid credential type. Action: Specify a credential type of either GSS_C_ACCEPT, GSS_C_INITIATE or GSS_C_BOTH. 0x1286202f gssdce_s_ber_decoding_error Severity: Varies Component: gss Text: Error decoding BER token header. The token is corrupt.
Error Messages and Status Codes Text: A credential cache entry could not be established. Explanation: An internal error occured while trying to open a credential cache. Action: Retry the operation. 0x12862022 gssdce_s_couldnt_translate_name Severity: Varies Component: gss Text: The registry could could not translate the specified name. Explanation: The name or Universal Unique Identifier (UUID) was not found in the registry. Action: Supply a valid name.
OSF DCE Problem Determination Guide Action: Use either a credential for the correct principal, or the default credential. 0x1286202a gssdce_s_invalid_context_state Severity: Varies Component: gss Text: The context is not available for the attempted operation Explanation: An open context cannot be reused until it is deleted. A context must be open before per-message services are available Action: Release the context before attempting to reuse it or open it before attempting to use per-message services.
Error Messages and Status Codes 0x1286203d gssdce_s_message_omitted Severity: Varies Component: gss Text: The token was valid, but an earlier token has not yet been received Explanation: The token is valid, but an earlier token has not yet been received. Action: Application specific. 0x12862040 gssdce_s_message_out_of_order Severity: Varies Component: gss Text: The token was valid, but is severely out of sequence. Explanation: The token was valid, but is severely out of sequence.
OSF DCE Problem Determination Guide Action: Request only integrity protection. 0x12862017 gssdce_s_no_login_context Severity: Varies Component: gss Text: The caller has no default login context. Explanation: An attempt was made to use a default login context when none had been established. Action: Establish a login context before calling this routine. 0x1286204d gssdce_s_no_pac_available Severity: Varies Component: gss Text: The context did not contain a PAC.
Error Messages and Status Codes • There is a system configuration problem. Action: Check your GSSAPI routine, application code, or system configuration. 0x12862025 gssdce_s_param_required Severity: Varies Component: gss Text: A required parameter was missing. Explanation: An attempt to access a required parameter failed. Action: Supply valid parameters in all required positions. 0x1286203c gssdce_s_reflected_packet Severity: Varies Component: gss Text: The token was not created by the remote peer.
OSF DCE Problem Determination Guide Action: Try one of the following: • If the token was created using the gss_sign routine, use the gss_verify routine to read it. • If the token was created using the gss_seal routine, use the gss_unseal routine to read it. 0x1286201a gssdce_s_unimplemented_feature Severity: Varies Component: gss Text: The requested feature is not implemented. Explanation: The requested feature has not been implemented. Action: None required.
Error Messages and Status Codes Explanation: The specified security mechanism is not supported. Action: Specify a supported mechanism. 0x12862032 gssdce_s_unsupported_name_type Severity: Varies Component: gss Text: The specified name type is not recognized. Explanation: An invalid or unsupported name-type was specified. Action: Specify a supported name-type, or use the default name-type 0x12862041 gssdce_s_unsupported_signature_algorithm Severity: Varies Component: gss Text: The token is invalid.
OSF DCE Problem Determination Guide 0x12862137 gss_s_ac_bad_token_wrapper Severity: Error Component: gss / gss_s_auth Text: Token wrapper was invalid in gss_accept_sec_ctx Explanation: Action: 0x1286213b gss_s_ac_bad_tok_type Severity: Error Component: gss / gss_s_auth Text: Bad token type (%2.2x %2.
Error Messages and Status Codes 0x12862157 gss_s_ac_cli_name_noconv Severity: Error Component: gss / gss_s_auth Text: Couldn’t convert client name (%x) Explanation: Action: 0x128620e4 gss_s_ac_cred_nomem1 Severity: Error Component: gss / gss_s_general Text: Acquire_cred - Out of memory creating cred (pt1) Explanation: Out of heap memory Action: 0x128620e5 gss_s_ac_cred_nomem2 Severity: Error Component: gss / gss_s_general Text: Acquire_cred - Out of memory creating cred (pt2) Explanation: Out of hea
OSF DCE Problem Determination Guide 0x128620e3 gss_s_ac_ini_failed Severity: Error Component: gss / gss_s_general Text: Acquire_cred - Inquire_net_info failed (%x) Explanation: The error code shown was returned by inquire_net_info Action: 0x12862161 gss_s_ac_inv_deleg Severity: Error Component: gss / gss_s_auth Text: Delegation inconsistency Explanation: Action: 0x1286213a gss_s_ac_inv_mech Severity: Error Component: gss / gss_s_auth Text: Invalid mechanism in token in gss_accept_sec_ctx Explanation
Error Messages and Status Codes 0x12862144 gss_s_ac_names_differ Severity: Warning Component: gss / gss_s_auth Text: Ticketted server name differs from explicit credential Explanation: Action: 0x1286215e gss_s_ac_no_deleg1 Severity: Error Component: gss / gss_s_auth Text: Can’t become delegate (%x) Explanation: Action: 0x12862160 gss_s_ac_no_deleg2 Severity: Error Component: gss / gss_s_auth Text: Can’t become impersonator (%x) Explanation: Action: 0x1286215d gss_s_ac_no_lc Severity: Error Compone
OSF DCE Problem Determination Guide 0x12862146 gss_s_ac_nomem2 Severity: Error Component: gss / gss_s_auth Text: No memory to copy client name Explanation: Action: 0x128620e2 gss_s_ac_noname_default Severity: Error Component: gss / gss_s_general Text: Couldn’t find name in default context (%x) Explanation: The default context has no name Action: 0x1286214c gss_s_ac_no_pac_name Severity: Error Component: gss / gss_s_auth Text: Can’t get name from PAC (%x) Explanation: Action: 0x12862130 gss_s_ac_nul
Error Messages and Status Codes 0x12862153 gss_s_ac_skbr_failed Severity: Error Component: gss / gss_s_auth Text: sec_krb_gss_build_rep_message failed (%x) Explanation: Action: 0x1286213e gss_s_ac_skdm_failed Severity: Error Component: gss / gss_s_auth Text: sec_krb_gss_decode_message failed (%x) Explanation: Action: 0x1286215f gss_s_ac_trace_no_lc Severity: Error Component: gss / gss_s_auth Text: Traced delegation requires explicit acceptor credential Explanation: Action: 0x1286214e gss_s_ac_unk_a
OSF DCE Problem Determination Guide 0x12862162 gss_s_ac_unk_deleg_type1 Severity: Error Component: gss / gss_s_auth Text: Unknown delegation type in context: %d Explanation: Action: 0x12862074 gss_s_alloc_cred_allocated Severity: Notice Component: gss / gss_s_general Text: Allocated new cred-id: %ld Explanation: Action: 0x12862072 gss_s_alloc_cred_nomem Severity: Error Component: gss / gss_s_general Text: Alloc_cred - out of memory Explanation: No heap memory left to allocate a credential Action: 0
Error Messages and Status Codes 0x1286216c gss_s_bp_inv_seal_alg Severity: Error Component: gss / gss_s_protect Text: Invalid seal algorithm Explanation: Action: 0x12862165 gss_s_bp_inv_state Severity: Error Component: gss / gss_s_protect Text: Invalid context state in gss_build_prot_message Explanation: Action: 0x12862167 gss_s_bp_inv_tok_type Severity: Error Component: gss / gss_s_protect Text: Invalid token-type in gss_build_prot_message Explanation: Action: 0x1286216d gss_s_bp_nomem1 Severity:
OSF DCE Problem Determination Guide 0x12862169 gss_s_bp_unk_enc_alg Severity: Error Component: gss / gss_s_protect Text: Unknown encryption algorithm in gss_build_prot_message Explanation: Action: 0x12862166 gss_s_bp_unk_sig_alg Severity: Error Component: gss / gss_s_protect Text: Unknown signature algorithm in gss_build_prot_message Explanation: Action: 0x12862060 gss_s_cant_create_cred_mutex Severity: Error Component: gss / gss_s_locks Text: Couldn’t create GSSAPI cred-list mutex (%x) Explanation:
Error Messages and Status Codes 0x12862062 gss_s_cant_create_ctx_mutex_attr Severity: Error Component: gss / gss_s_locks Text: Couldn’t create GSSAPI ctx-list mutex attributes (%x) Explanation: The error code shown was returned from an attempt to create a mutex attribute block for GSSAPI’s context-list Action: 0x1286206a gss_s_cant_create_elem_mutex_attr Severity: Error Component: gss / gss_s_locks Text: Couldn’t create GSSAPI element mutex attributes (%x) Explanation: The error code shown was returned
OSF DCE Problem Determination Guide 0x12862066 gss_s_cant_create_rgy_mutex_attr Severity: Error Component: gss / gss_s_locks Text: Couldn’t create GSSAPI registry mutex attributes (%x) Explanation: The error code shown was returned from an attempt to create a mutex attribute block for GSSAPI’s registry interactions Action: 0x12862061 gss_s_cant_delete_cred_mutex_attr Severity: Error Component: gss / gss_s_locks Text: Couldn’t delete GSSAPI cred-list mutex attributes (%x) Explanation: The error code sho
Error Messages and Status Codes 0x12862059 gss_s_cant_reg_table Severity: Warning Component: gss / gss_s_general Text: Couldn’t register default GSSAPI message table (%x) Explanation: The error code shown was returned from an attempt to install th GSSAPI message table Action: 0x1286205f gss_s_cant_set_cred_attributes Severity: Error Component: gss / gss_s_locks Text: Couldn’t set GSSAPI cred-list mutex attributes (%x) Explanation: The error code shown was returned from an attempt to initialize the mute
OSF DCE Problem Determination Guide 0x12862067 gss_s_cant_set_rgy_attributes Severity: Error Component: gss / gss_s_locks Text: Couldn’t set GSSAPI registry mutex attributes (%x) Explanation: The error code shown was returned from an attempt to initialize the mutex attribute block for GSSAPI’s registry interactions Action: 0x128620ab gss_s_cei_frc_failed Severity: Error Component: gss / gss_s_general Text: Couldn’t fixup registry context in cred_expand_id (%x) Explanation: A registry context could not
Error Messages and Status Codes Severity: Error Component: gss / gss_s_general Text: cred_expand_id - Registry server unavailable Explanation: No registry server could be contacted Action: 0x12862076 gss_s_citg_nolock_cred Severity: Error Component: gss / gss_s_locks Text: Cred_info_to_gss - Couldn’t lock cred-list Explanation: An internal error was detected while attempting to lock the credential-list Action: 0x1286207d gss_s_citg_nolock_ctx Severity: Error Component: gss / gss_s_locks Text: Ctx_in
OSF DCE Problem Determination Guide Explanation: A partially-built context is being re-used.
Error Messages and Status Codes Explanation: Action: 0x12862183 gss_s_dmh_short_token Severity: Error Component: gss / gss_s_protect Text: Short token in decode_message_header Explanation: Action: 0x12862186 gss_s_dmh_unk_enc_alg Severity: Error Component: gss / gss_s_protect Text: Unrecognised encryption algorithm in decode_message_header Explanation: Action: 0x12862185 gss_s_dmh_unk_sign_alg Severity: Error Component: gss / gss_s_protect Text: Unrecognised signature algorithm in decode_message_he
OSF DCE Problem Determination Guide Severity: Error Component: gss / gss_s_protect Text: Error unwrapping per-message token (%x) Explanation: Action: 0x128621d1 gss_s_ds_bad_mech Severity: Warning Component: gss / gss_s_general Text: Bad mechanism-type in gss_display_status Explanation: Action: 0x1286218e gss_s_dsc_inv_ctx Severity: Error Component: gss / gss_s_protect Text: Invalid context-handle in gss_delete_sec_context Explanation: Action: 0x128621ae gss_s_fmi_ksched_failed Severity: Error Com
Error Messages and Status Codes 0x128620a9 gss_s_frc_bind_retrying Severity: Warning Component: gss / gss_s_general Text: Fixup_registry_context - Bind failed (%x), retrying Explanation: An attempt to bind to the registry returned the error code show. The attempt will be re-tried Action: 0x128620aa gss_s_frc_retry_exceeded Severity: Error Component: gss / gss_s_general Text: Registry bind retry count exceeded (last error = %x) Explanation: Multiple registry binds have failed. Giving up.
OSF DCE Problem Determination Guide 0x12862094 gss_s_gac_err_ctx_exp1 Severity: Error Component: gss / gss_s_general Text: Error obtaining auxiliary login-context expiration (%x) Explanation: The error code shown was received when determining the expiration of an auxiliary login-context Action: 0x1286209d gss_s_gac_sls_failed Severity: Error Component: gss / gss_s_general Text: sec_login_setup_identity failed (%x) Explanation: The error code shown was returned by sec_login_setup_identity Action: 0x128
Error Messages and Status Codes 0x128620f6 gss_s_gdt_scic_failed Severity: Error Component: gss / gss_s_auth Text: gss_cred_get_delegation_type: sec_cred_initialize_cursor failed (%x) Explanation: The error code shown was returned by sec_cred_initialize_cursor Action: 0x128620f7 gss_s_gdt_slgi_failed Severity: Error Component: gss / gss_s_auth Text: gss_login_get_delegation_type: sec_login_get_initiator failed (%x) Explanation: The error code shown was returned by sec_login_get_initiator Action: 0x128
OSF DCE Problem Determination Guide Severity: Error Component: gss / gss_s_auth Text: Couldn’t parse name in gss_init_sec_ctx (%x) Explanation: The error code shown was returned from a parse-name attempt Action: 0x1286210e gss_s_ic_cant_delegate Severity: Error Component: gss / gss_s_auth Text: Can’t enable delegation in gss_init_sec_ctx (%x) Explanation: The error code shown was returned from an attempt to enable impersonation Action: 0x1286210b gss_s_ic_cant_disable_deleg Severity: Error Component:
Error Messages and Status Codes Text: Couldn’t allocate cred in gss_init_sec_ctx Explanation: Couldn’t create credential Action: 0x12862102 gss_s_ic_cred_not_init Severity: Error Component: gss / gss_s_auth Text: Credential is not capable of initiating contexts Explanation: Credential is of wrong type Action: 0x12862103 gss_s_ic_ctx_nomem Severity: Error Component: gss / gss_s_auth Text: Couldn’t allocate context in gss_init_sec_ctx Explanation: Couldn’t allocate context Action: 0x12862109 gss_s_ic_d
OSF DCE Problem Determination Guide Explanation: The context handle is invalid Action: 0x12862101 gss_s_ic_inv_cred Severity: Error Component: gss / gss_s_auth Text: Couldn’t resolve credential in gss_init_sec_ctx Explanation: Coulrn’t retrieve credential Action: 0x12862104 gss_s_ic_inv_cred_mech Severity: Error Component: gss / gss_s_auth Text: Invalid mechanism in credential in gss_init_sec_ctx Explanation: Internal error.
Error Messages and Status Codes Action: 0x12862123 gss_s_ic_mutual_dec_failed Severity: Error Component: gss / gss_s_auth Text: sec_krb_gss_decode_rep_message failed (%x) Explanation: Action: 0x128620ff gss_s_ic_no_def_ctx Severity: Error Component: gss / gss_s_auth Text: Couldn’t retrieve default login context (%x) Explanation: Default login-context unavailable Action: 0x1286210f gss_s_ic_no_krb_cred_cache Severity: Error Component: gss / gss_s_auth Text: Can’t acquire Kerberos credential cache in
OSF DCE Problem Determination Guide Action: 0x128620fa gss_s_ic_null_context Severity: Error Component: gss / gss_s_auth Text: Error - gss_init_sec_context was passed a null context-handle Explanation: A context handle must be used with gss_init_sec_context Action: 0x12862116 gss_s_ic_skbm_failed Severity: Error Component: gss / gss_s_auth Text: sec_krb_gss_build_message failed (%x) Explanation: Action: 0x128620dd gss_s_lcc_cred_nomem Severity: Error Component: gss / gss_s_general Text: No memory t
Error Messages and Status Codes 0x128620d2 gss_s_lcc_null Severity: Error Component: gss / gss_s_general Text: Output cred-handle is NULL in gssdce_login_context_to_cred Explanation: You must supply somewhere for GSSAPI to place the generated credential handle Action: 0x12862056 gss_s_nomem_1 Severity: Error Component: gss / gss_s_general Text: Out of memory in string_to_irep Explanation: Action: 0x128620c5 gss_s_oc_nomem Severity: Error Component: gss / gss_s_general Text: Out of memory in nm_oid_c
OSF DCE Problem Determination Guide 0x1286218d gss_s_pct_inv_cksum Severity: Error Component: gss / gss_s_protect Text: Bad checksum in process_context_token Explanation: Action: 0x1286218b gss_s_pct_inv_ctx Severity: Error Component: gss / gss_s_protect Text: Invalid context-handle (%d) passed to gss_process_context_token Explanation: Action: 0x1286218c gss_s_pct_inv_ctx_state Severity: Error Component: gss / gss_s_protect Text: Invalid context state in process_context_token Explanation: Action: 0
Error Messages and Status Codes 0x128620bd gss_s_ptn_gn_failed Severity: Error Component: gss / gss_s_general Text: gen_name failed in pac_to_name (%x) Explanation: The registry couldn’t determine the name Action: 0x128620b3 gss_s_ptn_inv_cred Severity: Error Component: gss / gss_s_general Text: Invalid credential handle in pac_to_name Explanation: Internal error - the credential handle is invalid Action: 0x128620c0 gss_s_ptn_nomem Severity: Error Component: gss / gss_s_general Text: Out of memory i
OSF DCE Problem Determination Guide Text: Received RGY_SERVER_UNAVAILABLE. Retry count exceeded Explanation: No registry server is available. Giving up.
Error Messages and Status Codes Explanation: An internal error was detected when attempting to lock the credential-list Action: 0x12862071 gss_s_res_cred_not_found Severity: Warning Component: gss / gss_s_general Text: Resolve_cred - Cred %ld not found Explanation: The specified credential handle was not found Action: 0x12862077 gss_s_resolve_ctx_nolock Severity: Error Component: gss / gss_s_locks Text: Resolve_cred - Couldn’t lock ctx-list Explanation: An internal error was detected while attempting
OSF DCE Problem Determination Guide Explanation: Action: 0x128621ba gss_s_seca_cksum_type_wrong Severity: Error Component: gss / gss_s_auth Text: Checksum is of wrong type Explanation: Action: 0x128621c4 gss_s_seca_copy_kblock_failed Severity: Error Component: gss / gss_s_auth Text: krb5_copy_keyblock failed (%x) Explanation: Action: 0x128621bf gss_s_seca_no_cksum Severity: Error Component: gss / gss_s_auth Text: No checksum found in authenticator Explanation: Action: 0x128621bd gss_s_seca_nomem1
Error Messages and Status Codes Severity: Error Component: gss / gss_s_auth Text: Null channel-bindings in sec_krb_gss_decode_message Explanation: Action: 0x128621c5 gss_s_seca_skbmc_failed Severity: Error Component: gss / gss_s_auth Text: sec_krb_build_message_common failed (%x) Explanation: Action: 0x128621b6 gss_s_seca_skdmc_failed Severity: Error Component: gss / gss_s_auth Text: sec_krb_decode_msg_common failed (%x: %s) Explanation: Action: 0x128621b1 gss_s_seca_timestamp Severity: Error Comp
OSF DCE Problem Determination Guide 0x1286218f gss_s_sign_bad_buffer Severity: Error Component: gss / gss_s_protect Text: bad buffer (either message or token) in gss_sign Explanation: Action: 0x12862192 gss_s_sign_bpm_failed Severity: Error Component: gss / gss_s_protect Text: gss_build_prot_message failed (%x) Explanation: Action: 0x12862190 gss_s_sign_inv_ctx Severity: Error Component: gss / gss_s_protect Text: Invalid context handle in gss_sign Explanation: Action: 0x12862191 gss_s_sign_inv_ctx_
Error Messages and Status Codes 0x1286219d gss_s_uns_dmh_failed Severity: Error Component: gss / gss_s_protect Text: Decode_message_header failed in gss_unseal (%x) Explanation: Action: 0x128621a1 gss_s_uns_inv_pad_byte Severity: Error Component: gss / gss_s_protect Text: Invalid pad byte (%d) Explanation: Action: 0x128621a2 gss_s_uns_inv_pad_check Severity: Error Component: gss / gss_s_protect Text: Invalid pad check-bytes Explanation: Action: 0x1286219e gss_s_uns_nomem Severity: Error Component:
OSF DCE Problem Determination Guide 0x128620ef gss_s_unwrap_inv2 Severity: Error Component: gss / gss_s_protocol Text: Token wrapper invalid (Length not 1,2 or 3 bytes) Explanation: Corrupt token Action: 0x128620f0 gss_s_unwrap_inv3 Severity: Error Component: gss / gss_s_protocol Text: Token wrapper invalid (Encoded length > actual length) Explanation: Corrupt token Action: 0x128620f1 gss_s_unwrap_inv4 Severity: Error Component: gss / gss_s_protocol Text: Token wrapper invalid (Mech-type type not OI
Error Messages and Status Codes Text: Bad buffer in call to gss_verify Explanation: Action: 0x1286219c gss_s_vfy_bad_sig Severity: Error Component: gss / gss_s_protect Text: The token signature was incorrect Explanation: Action: 0x12862197 gss_s_vfy_bad_tok_type Severity: Error Component: gss / gss_s_protect Text: Bad token type in gss_verify Explanation: Action: 0x12862196 gss_s_vfy_dmh_failed Severity: Error Component: gss / gss_s_protect Text: Decode_message_header failed in gss_verify (%x) Expl
OSF DCE Problem Determination Guide 0x12862195 gss_s_vfy_inv_ctx_state Severity: Error Component: gss / gss_s_protect Text: Invalid context state in gss_verify Explanation: Action: 0x1286219b gss_s_vfy_sign_unk Severity: Error Component: gss / gss_s_protect Text: The token was signed using an unsupported algorithm Explanation: Action: 0x12862181 gss_s_vrs_seq_invalid Severity: Warning Component: gss / gss_s_protect Text: Sequence number out of range Explanation: Action: 0x128620ca gss_s_wnd_reverse
Error Messages and Status Codes 0x128620e9 gss_s_wrap_mech_long Severity: Error Component: gss / gss_s_protocol Text: Mech-type size (%d) is too large Explanation: Internal error - the token is too large to wrap Action: 0x128620eb gss_s_wrap_nomem Severity: Error Component: gss / gss_s_protocol Text: No memory to copy wrapped token Explanation: Out of heap memory Action: 0x128621a8 gss_s_xcc_inv_ctx Severity: Error Component: gss / gss_s_general Text: Invalid context-handle passed to gss_extract_cre
OSF DCE Problem Determination Guide 0x128621a5 gss_s_xps_inv_ctx Severity: Error Component: gss / gss_s_general Text: Invalid context-handle passed to gss_extract_PAC_from_sec_context Explanation: Action: 0x128621a6 gss_s_xps_inv_ctx_state Severity: Error Component: gss / gss_s_general Text: Invalid context state in gss_extract_PAC_from_sec_context Explanation: Action: 0x128621a7 gss_s_xps_no_pac Severity: Warning Component: gss / gss_s_general Text: Attempt to extract PAC from non-PAC-based context
Error Messages and Status Codes 0x1260afa0 GST_INV_DEBUG_LEVEL Severity: Fatal Component: gds / GDS_S_STEP Text: Invalid debug level %ld. Explanation: The evaluation tool gstep was called with an invalid debug level. Action: Call gstep with a correct debug level in the range from 0 to 9. 0x1260afa3 GST_LOGCLOSE_ERR Severity: Fatal Component: gds / GDS_S_STEP Text: The specified logfile cannot be closed, error status: 0x%lx. Explanation: The evaluation tool gstep could not close the specified logfile.
OSF DCE Problem Determination Guide 0x1260afa4 GST_OFFSET_ERR Severity: Fatal Component: gds / GDS_S_STEP Text: An entry with the specified offset could not be found. Error_status: 0x%lx. Explanation: The evaluation tool gstep could not find the log entry with the specified offset. Action: Call gstep with a valid offset. 0x1260ae32 gsu_access_right_failed Severity: Fatal Component: gds / GDS_S_SETUP Text: Cannot access file %s.
Error Messages and Status Codes Action: Specify the overwrite switch and try again. 0x1260ae44 gsu_dirid_server_no_overwrite Severity: Fatal Component: gds / GDS_S_SETUP Text: Dir id %d already configured as a client/server system and overwrite switch was not set.\n Explanation: The specified directory id was already configured as a client/server system and overwrite switch was not specified by the user. Action: Specify the overwrite and try again.
OSF DCE Problem Determination Guide Text: Could not write into file %s.\n Explanation: The program could not write into the specified file. Action: Check the access rights of the file. 0x1260ae2c gsu_local_schema_error Severity: Fatal Component: gds / GDS_S_SETUP Text: Invalid value for "Local schema is master".\n Explanation: An invalid value was specified for the "Local schema is master" prompt. The valid values are: For a client server system it is not allowed.
Error Messages and Status Codes Explanation: The DSA name has not been specified in the file. Action: Specify the DSA name in file and try again. 0x1260ae2a gsu_missing_principal_name Severity: Fatal Component: gds / GDS_S_SETUP Text: Missing principal name.\n Explanation: The principal name has not been specified in the file. Action: Specify the principal name and try again. 0x1260ae2b gsu_missing_psap_name Severity: Fatal Component: gds / GDS_S_SETUP Text: Missing the PSAP address for %s.
OSF DCE Problem Determination Guide 0x1260ae15 gsu_unknown_switch Severity: Fatal Component: gds / GDS_S_SETUP Text: Unknown option %s\n Explanation: The user supplied option was unkown. Action: Specify a valid option and try again. 0x173ca00f msg_s_bad_id Severity: Varies Component: svc Text: Invalid message ID Explanation: A message ID with an invalid technology or component was specified. Action: Correct the programming error.
Error Messages and Status Codes Action: Verify that the status code being used is valid, and try to retrieve text from the message catalog. 0x173ca010 msg_s_no_memory Severity: Varies Component: svc Text: Out of memory Explanation: Could not allocate memory for message table, string copy, or other internal requirement. Action: Increase the swap or paging space or acquire more physical memory. Also check the program for bugs that resulted in bad pointers corrupting the heap allocation area.
OSF DCE Problem Determination Guide Action: Declare the (pipe) data type with a (typedef) so the (pipe) has a name associated with it. 0x1328302d NIDL_ANONTYPE Severity: Varies Component: idl Text: Declaration of %1$s cannot contain an anonymous type Explanation: The type specification for the parameter, field or (union) arm (name) contains a data type that is an anonymous (struct) or (union).
Error Messages and Status Codes 0x13283033 NIDL_ARRCFMTDIM Severity: Varies Component: idl Text: Arrays can be conformant in the first dimension only Explanation: IDL only allows an array to be conformant in its first dimension. Action: Modify the array declaration so dimensions other than the first have fixed bounds. 0x1328302f NIDL_ARRELEMCFMT Severity: Varies Component: idl Text: Array elements cannot be conformant arrays or conformant structures Explanation: Array elements must be of fixed size.
OSF DCE Problem Determination Guide Text: Arrays of [%1$s] type cannot be multidimensional Explanation: The indicated attribute cannot be applied to a type if there is an array which has this type as base type and the array has more than one dimension. Action: Specify a different base type for the array which has more than one dimension.
Error Messages and Status Codes Explanation: An IDL declaration attempts to use mixed pointer ((*)) and array (([])) syntax to define a multidimensional array. The interpretation that an asterisk ((*)) is used to represent an array is due to the presence of one or more of the ([max_is]), or ([size_is]) attributes. It is ambiguous whether size attributes apply to the pointer or the array, thus IDL does not allow mixing pointer and array syntax when size attributes are present.
OSF DCE Problem Determination Guide Explanation: None Action: None 0x13283138 NIDL_ATTRPTRVOID Severity: Varies Component: idl Text: Attribute [%1$s] cannot be applied to a void * type Explanation: The indicated attribute is not valid on a (void *) type. The only attribute that is meaningful on a (void *) type is ([context_handle]). Action: Edit the IDL source code to remove the conflict.
Error Messages and Status Codes Text: Invalid use of tag %1$s Explanation: You used a previously defined tag name in a declaration of a different type. Tag names can be used for a (struct) or (union) declaration, but not both. Action: Either make sure that each use of the tag name specifies the same type, or use different tag names with each type.
OSF DCE Problem Determination Guide Explanation: The value of a (case) expression in a discriminated (union) is not the same data type as the discriminator variable in the (switch) clause. Action: Change the discriminator declaration or the (case) expression so the data types match.
Error Messages and Status Codes Severity: Varies Component: idl Text: Support routines for interface %1$s Explanation: None Action: None 0x13283002 NIDL_CMDERR Severity: Varies Component: idl Text: Use %1$s for list of command options Explanation: Errors on the command line prevent the IDL compiler from executing. Action: Invoke the IDL compiler with the indicated command option to get a list of valid command options, then correct the error.
OSF DCE Problem Determination Guide Text: The attributes [%1$s] and [%2$s] cannot occur together Explanation: The specified attributes are conflicting and only one or the other can be specified. Action: Remove one of the attributes.
Error Messages and Status Codes Action: Add the indicated command option to your (idl) command so that the IDL compiler will invoke the C preprocesor to preprocess source IDL and ACF files before they are parsed.
OSF DCE Problem Determination Guide 0x13283051 NIDL_CTXUNIMEM Severity: Varies Component: idl Text: Context handle is not valid as a member of a union Explanation: A context handle cannot be a member of a (union). Action: Pass a context handle as a separate parameter to an operation, rather than embedding it as a member of a (union).
Error Messages and Status Codes Severity: Varies Component: idl Text: Definition of tag %1$s is not yet complete Explanation: The tag (name) is forward referenced in a context that requires it to be completely defined. References to (struct) or (union) types by means of tag name before the (struct) or (union) is completely defined is only allowed in contexts in which the size is not needed (a pointer to the type or in a (typedef)).
OSF DCE Problem Determination Guide Text: A [switch_is] variable must not have a [transmit_as] type Explanation: The parameter or field referenced in a ([switch_is]) clause must not be of a data type that has been declared to have a ([transmit_as]) type. Action: Change the referenced parameter or field data type, or the data type definition itself.
Error Messages and Status Codes 0x1328314d NIDL_ENCDECDIR Severity: Varies Component: idl Text: Operation with [encode,decode] must have all [in,out] parameters Explanation: The client stub for an operation with the ([encode,decode]) attributes can encode the operation’s parameters into a data stream and subsequently decode the data back into parameters. This only makes sense if the decoded data, i.e. the ([out] parameters, agrees with the originally encoded ([in]) parameters.
OSF DCE Problem Determination Guide Severity: Varies Component: idl Text: Warning: Syntax error in endpoint specification "%1$s" Explanation: The syntax of the string describing the endpoint must be of the form (protocol:[endpoint]). Although not in the expected format, the string (endpoint) is assumed to be the desired endpoint specification and is put into the generated stubs. Action: Correct the syntax of the (endpoint) specification.
Error Messages and Status Codes proper header files that were installed with DCE. 0x1328311c NIDL_EUMEMATTR Severity: Varies Component: idl Text: An encapsulated union member cannot have the [%1$s] attribute Explanation: The attribute used is valid only on nonencapsulated unions, but was used on an encapsulated union. Action: Remove the attribute. Consult the documentation for the differences between encapsulated and nonencapsulated unions.
OSF DCE Problem Determination Guide Severity: Varies Component: idl Text: File %1$s not found Explanation: A file, specified by the user either in the IDL source or ACF file, does not exist. Action: Check the filenames you specified. Determine the location of any imported or included files that are needed to compile the IDL source file specified. If any are not in the directories that the IDL compiler searches by default, you must use a command line option to specify additional directories to search.
Error Messages and Status Codes Action: Change the data limit field or parameter referenced by the ([first_is]) clause to integer data type. 0x1328312a NIDL_FLDXMITCFMT Severity: Varies Component: idl Text: A structure field cannot be of a presented type for which the transmitted type is conformant Explanation: IDL does not allow a structure field whose type has a ([transmit_as]) attribute where the transmissible type is conformant. Action: Use a valid IDL construct.
OSF DCE Problem Determination Guide 0x1328312e NIDL_FORSIGNINT Severity: Varies Component: idl Text: Warning: FORTRAN INTEGER*4 used for IDL unsigned long Explanation: FORTRAN does not support unsigned integers. IDL maps unsigned long to INTEGER*4 in the generated FORTRAN header file. Action: If the application needs to store large unsigned integer values special care might be necessary in the FORTRAN application code.
Error Messages and Status Codes Explanation: None Action: None 0x13283061 NIDL_FPPIPEBASE Severity: Varies Component: idl Text: The base type of a pipe cannot be a function pointer Explanation: None Action: None 0x13283062 NIDL_FPSTRFLD Severity: Varies Component: idl Text: Function pointers are not valid as structure fields Explanation: None Action: None 0x13283063 NIDL_FPUNIMEM Severity: Varies Component: idl Text: Function pointers are not valid as members of unions Explanation: None Action: None 0
OSF DCE Problem Determination Guide 0x13283065 NIDL_HANARRELEM Severity: Varies Component: idl Text: Array elements cannot be of type handle_t Explanation: Data type (handle_t) is only meaningful when used as the data type of the first parameter in an operation. It is used to establish a binding to a server of the interface. Action: Do not declare arrays of type (handle_t).
Error Messages and Status Codes Action: Do not declare a pointer to data type (handle_t), except as a parameter. 0x13283068 NIDL_HANFIRSTPRM Severity: Varies Component: idl Text: A handle_t as other than the first parameter requires a [transmit_as] Explanation: Data type (handle_t) is only meaningful when used as the data type of the first parameter in an operation. A bound handle is used to deliver the call to the correct server of the interface.
OSF DCE Problem Determination Guide Text: Members of unions cannot be of type handle_t Explanation: Data type (handle_t) is only meaningful when used as the data type of the first parameter in an operation. It is used to establish a binding to a server of the interface. Action: Do not declare (union) members of data type (handle_t).
Error Messages and Status Codes 0x1328306f NIDL_IGNARRELEM Severity: Varies Component: idl Text: The attribute [ignore] on array elements is not allowed Explanation: The ([ignore]) attribute is not allowed on array elements Action: Remove the ([ignore]) attribute from the relevant declaration. 0x13283070 NIDL_IGNATTRPTR Severity: Varies Component: idl Text: The attribute [ignore] is valid only for pointers Explanation: The ([ignore]) attribute is valid only for pointers.
OSF DCE Problem Determination Guide 0x13283072 NIDL_ILLPARAMATTR Severity: Varies Component: idl Text: The attribute [%1$s] on a parameter is not allowed Explanation: The specified attribute is not valid on a parameter declaration. Action: Remove the attribute. 0x13283073 NIDL_ILLTYPEATTR Severity: Varies Component: idl Text: The attribute [%1$s] on a type is not allowed Explanation: The specified attribute is not valid on a type declaration. Action: Remove the attribute.
Error Messages and Status Codes 0x13283007 NIDL_INCLCREATE Severity: Varies Component: idl Text: Creating include file %1$s Explanation: None Action: None 0x1328301c NIDL_INCLTYPE Severity: Varies Component: idl Text: Warning: ACF include statement advised for definition of type %1$s Explanation: An Attribute Configuration File (ACF) declares a type that is not defined in an IDL file. The type is referenced in the generated stub code, thus its definition needs to be included into the stub code as well.
OSF DCE Problem Determination Guide Severity: Varies Component: idl Text: Interface attributes [code] and [nocode] cannot occur together Explanation: The ([code]) or ([nocode]) attribute on an interface establishes the default for operations in the interface. You can specify only one of these attributes. Action: Remove one of the conflicting attributes.
Error Messages and Status Codes Explanation: The interface name in an interface’s Attribute Configuration File must be identical to the interface name in the IDL source. Action: Change the ACF to use the correct interface name. 0x1328307e NIDL_INTOVERFLOW Severity: Varies Component: idl Text: Integer value overflows %1$s Explanation: The integer value specified is too large to be contained in the destination of size (size).
OSF DCE Problem Determination Guide Explanation: The documentation defines all the valid integers that can accompany the (-bug) and (-no_bug) options. You have chosen an invalid value. Action: See the documentation for the correct number.
Error Messages and Status Codes Explanation: An octal integer contains a digit that is not valid. Integer constants with a leading zero are interpreted as octal values. Only the digits 0 through 7 are valid in octal value. Action: If the integer is not intended to be specified in octal, remove the leading zeros. Otherwise correct the value to contain only octal digits.
OSF DCE Problem Determination Guide 0x13283089 NIDL_INVPTRCTX Severity: Varies Component: idl Text: Pointers to context handles are valid only in parameter declarations Explanation: IDL does not allow pointers to context handles, except in parameter declarations. Action: Do not declare a pointer to a (context_handle), except as a parameter.
Error Messages and Status Codes Action: The IDL conformant array will be declared as a one-element array in the generated language header file. Your application code might be able to use the address of this array to access other array elements, depending on the target language. Alternatives are to write application code that uses the construct in another programming language, or to change the IDL source to use a construct that is supported by the target language.
OSF DCE Problem Determination Guide 0x13283133 NIDL_LANGUNSFNRS Severity: Varies Component: idl Text: Warning: Non-scalar function result converted to trailing [out] parameter Explanation: The target language selected does not allow the function result argument of a routine to be a non-scalar type. The IDL compiler converts such a construct to a trailing ([out]) parameter. Action: No action is required.
Error Messages and Status Codes Severity: Varies Component: idl Text: The lower bound must not be greater than the upper bound Explanation: The syntax of an array requires the lower bound to precede the upper bound. Action: Modify the array declaration so the lower bound is first. 0x13283008 NIDL_LEGALVALS Severity: Varies Component: idl Text: Legal values are: Explanation: Identifies a list of legal values for a command option. Action: Re-enter the option using one of the legal values.
OSF DCE Problem Determination Guide Severity: Varies Component: idl Text: Warning: The attributes [in_line] and [out_of_line] apply only to non-scalar types Explanation: Scalar data types are always marshalled in-line, since there is performance degradation if they are marshalled out-of-line. Action: Do not use the ([in_line]) and ([out_of_line]) attributes on scalar types.
Error Messages and Status Codes 0x13283093 NIDL_MAXIDINTF Severity: Varies Component: idl Text: Maximum identifier length for interface name is %1$lu characters Explanation: The IDL compiler constructs new identifier names that are referenced by generated stub code from the interface name. Therefore, the number of characters allowed in an interface name is less than for other identifiers. Action: Shorten the interface name.
OSF DCE Problem Determination Guide the number of characters allowed in such a data type is less than for other identifiers. Action: Shorten the data type name. 0x13283098 NIDL_MAXIDTYPPIPE Severity: Varies Component: idl Text: Maximum identifier length for pipe type is %1$lu characters Explanation: The IDL compiler constructs new identifier names that are referenced by generated stub code from the names of any (pipe) data types.
Error Messages and Status Codes Explanation: The ([max_is]) attribute specifies a parameter that contains the upper bound of a conformant array. This must be an ([in]) attribute so the server stub code knows how much space to allocate for the array. Action: Change the upper bound parameter referenced by the ([max_is]) clause to have the ([in]) attribute.
OSF DCE Problem Determination Guide Action: Fix the warnings you get, or recompile the IDL file or specify the (no_warn) option. 0x1328309f NIDL_MAYBEOUTPRM Severity: Varies Component: idl Text: A [maybe] operation cannot have [out] parameters or a function result Explanation: The ([maybe]) attribute specifies that the operation’s caller does not require and does not receive a response or fault indication. Do not use an ([out]) parameter or a function result in a ([maybe]) operation.
Error Messages and Status Codes 0x132830a2 NIDL_MININATTR Severity: Varies Component: idl Text: A [min_is] parameter must have the [in] attribute Explanation: The ([min_is]) attribute specifies a parameter that contains the lower bound of a conformant array. This parameter must have an ([in]) attribute so the server stub code will allocate adequate space for the array. Action: Change the lower bound parameter referenced by the ([min_is]) clause to have the ([in]) attribute.
OSF DCE Problem Determination Guide Action: Add the closing bracket if it is missing, otherwise make sure there are no other syntax errors. 0x13283049 NIDL_MISSONINTER Severity: Varies Component: idl Text: Missing "}" on interface declaration Explanation: The closing brace on the interface declaration was not found. It may have been omitted, the nesting of other braces may be incorrect, or some other syntax error may cause IDL to overlook a brace.
Error Messages and Status Codes Severity: Varies Component: idl Text: Warning: The attributes [max_is,length_is] or [size_is,last_is] used together Explanation: The ([max_is]) attribute specifies the array’s upper bound while the ([size_is]) attribute specifies the total number of array elements. Similarly, ([last_is]) specifies the upper data limit while ([length_is]) specifies the number of valid data elements. Action: Mixing the attributes can be incorrect.
OSF DCE Problem Determination Guide Text: Name is not a field: %1$s Explanation: The name referenced in an array attribute is not declared as a field in the structure being defined. Action: Declare a field in the structure that can be used in the array attribute. 0x132830a8 NIDL_NAMENOTFND Severity: Varies Component: idl Text: Name not found: %1$s Explanation: The referenced name is not defined. Action: Modify the interface to define an appropriate type for the specified name.
Error Messages and Status Codes Action: None. This is an informational message. 0x13283022 NIDL_NAMETOOLONG Severity: Varies Component: idl Text: Warning: Generated name too long at line %1$lu. Explanation: The compiler generated an identifier that is too long for some standard C compiler implementations. Action: Shorten the name at the specified line.
OSF DCE Problem Determination Guide Action: Provide a ([switch_is]) clause that specifies a field or parameter that is the union discriminator, or use an encapsulated union, where the union discriminator variable is encapsulated as a field within the union type.
Error Messages and Status Codes 0x1328300c NIDL_NEWUUID Severity: Varies Component: idl Text: %1$s Explanation: None Action: None 0x132830ac NIDL_NLSCATVER Severity: Varies Component: idl Text: %1$sNLS message catalog version mismatch in "%2$s", Expected: "%3$lu", Actual: "%4$s" Explanation: None Action: None 0x132830ad NIDL_NLSWRONG Severity: Varies Component: idl Text: %1$sError messages may be incorrect Explanation: The error messages reported by the IDL compiler are stored in an NLS message catalo
OSF DCE Problem Determination Guide Action: Correct the syntax of the (endpoint) specification. 0x1328316c NIDL_NOFLTPARAM Severity: Varies Component: idl Text: Warning: A [fault_status] parameter has no utility in this operation Explanation: A ([fault_status]) parameter is used in an operation where no fault can ever occur. An example is an encoding services operation, i.e. one using ([encode]) or ([decode]) - there is no remote entity from which a fault might be received.
Error Messages and Status Codes Severity: Varies Component: idl Text: Warning: Use of [%1$s] attribute requires %2$s Explanation: The indicated attribute is not supported by DCE V1.0, and thus should not be used if interoperability with implementations of DCE V1.0 is required. Action: Do not use the feature if interoperability with DCE V1.0 is required. Otherwise, specify the extended standard option on the compiler command to suppress the warning.
OSF DCE Problem Determination Guide 0x13283117 NIDL_NOPORTUNIQUE Severity: Varies Component: idl Text: Warning: Use of [unique] pointers requires %1$s Explanation: A ([unique]) pointer is not portable to all implementations of DCE V1.0. Action: Use a ([ref]) or ([ptr]) pointer instead or specify the extended standard option on the compiler command.
Error Messages and Status Codes Severity: Varies Component: idl Text: Arrays with a nonzero lower bound are not yet supported Explanation: None Action: None 0x132830b2 NIDL_NYSOUTSHAPE Severity: Varies Component: idl Text: The attribute [out(shape)] is not yet supported Explanation: None Action: None 0x132830b3 NIDL_NYSUNIQUE Severity: Varies Component: idl Text: Attribute [unique] is not yet supported Explanation: None Action: None 0x13283027 NIDL_OLDUUID Severity: Varies Component: idl Text: Warni
OSF DCE Problem Determination Guide Text: Unable to open %1$s for read access Explanation: The IDL compiler is unable to open a file for processing. Action: Make sure the file exists, and that it has the proper access protection for the IDL compiler. 0x132830b6 NIDL_OPENWRITE Severity: Varies Component: idl Text: Unable to open %1$s for write access Explanation: The IDL compiler is unable to create a file.
Error Messages and Status Codes Severity: Varies Component: idl Text: Operation with [out] [cs_char] data requires [cs_rtag] parameter Explanation: If any ([out]) parameter, or part of an ([out]) parameter, has a ([cs_char]) type, there must be a parameter in the same operation to which ([cs_rtag]) is applied. Action: Make sure the ACF declaration for the operation has the ([cs_rtag]) attribute applied to one of the parameters in the operation.
OSF DCE Problem Determination Guide 0x132830b8 NIDL_OUTCFMTARR Severity: Varies Component: idl Text: An [out] conformant array must be a top-level parameter or under a non-[ref] pointer Explanation: An array with unspecified lower and/or upper bounds requires size information. If the array is a top-level parameter, the size information must be in additional ([in]) parameters.
Error Messages and Status Codes 0x132830b9 NIDL_OUTPRMREF Severity: Varies Component: idl Text: Output parameters must be passed by reference Explanation: Parameters with the ([out]) or ([in,out]) attributes must be passed by reference, so the changed value of the parameter can be reflected back to the caller. Action: Add a (*) to the parameter declaration to indicate pass-by-reference calling mechanism.
OSF DCE Problem Determination Guide Text: An [out] parameter or operation result cannot contain [unique] pointers Explanation: Operation results and parameters that are ([out]) only cannot have ([unique]) pointers. Unique pointers may be (NULL), but there is no way to express the (NULL) value to the server unless the pointer is part of an ([in]) parameter.
Error Messages and Status Codes 0x132830c2 NIDL_PIPEXMITAS Severity: Varies Component: idl Text: A pipe cannot have a [transmit_as] type Explanation: A pipe is a specialized object handled by RPC that, by itself, is not a transmittable object. Thus, a ([transmit_as]) clause is invalid on a (pipe) definition. Action: Remove the ([transmit_as]) attribute.
OSF DCE Problem Determination Guide Text: Parameter name %1$s referenced in ACF operation %2$s is not defined Explanation: Any parameter referenced within an operation declaration in an Attribute Configuration File (ACF) must be defined in the corresponding operation definition in the IDL file. Action: Check for typographical errors in either file.
Error Messages and Status Codes Severity: Varies Component: idl Text: Incorrect syntax for pointer to conformant array Explanation: An IDL declaration attempts to use mixed pointer (*) and array ([]) syntax to declare a pointer to an array that has bounds that are not fixed. It is ambiguous whether size attributes apply to the pointer or the array, thus IDL does not allow mixing pointer and array syntax when size attributes are present.
OSF DCE Problem Determination Guide Explanation: An enumeration type with the ([v1_enum]) attribute follows NCS Version 1 NIDL semantics, and does not allow pointers to enumerations except as a reference passing mechanism on a parameter. Action: If compatibility with NCS Version 1 NIDL is not necessary, remove the ([v1_enum]) attribute.
Error Messages and Status Codes This is the capability provided by full pointers only, not ([ref]) pointers. Action: Remove the ([ref]) attribute from the type definition of the data type of the function result.
OSF DCE Problem Determination Guide 0x13283144 NIDL_RUNDOWN_COMMENT Severity: Varies Component: idl Text: Rundown routine for [context_handle] type %1$s Explanation: None Action: None 0x132830d4 NIDL_SCOPELVLS Severity: Varies Component: idl Text: Too many scoping levels Explanation: The input source is too complicated to be parsed. This occurs because of deeply nested (struct) or (union) declarations.
Error Messages and Status Codes Explanation: The ([size_is]) attribute specifies a parameter that contains size information of a conformant array. This must be an ([in]) attribute so the server stub code knows how much space to allocate for the array. Action: Change the size parameter referenced by the ([size_is]) clause to have the ([in]) attribute.
OSF DCE Problem Determination Guide Action: Change either the referenced parameter or field data type, or the data type definition itself. The parameter or field referenced in a ([min_is]), ([max_is]), ([size_is]), ([first_is]), ([last_is]), or ([length_is]) clause must not be of a data type that is declared to have a ([represent_as]) type. Change either the referenced parameter or field data type, or the data type definition itself.
Error Messages and Status Codes Action: Remove the ([v1_array]) attribute from the array declaration. 0x132830e0 NIDL_SMALLMINFIRST Severity: Varies Component: idl Text: The attribute [v1_array] cannot occur with the [min_is] or [first_is] attributes Explanation: The only valid array attributes for the ([v1_array]) attribute are ([max_is]), ([last_is]), and ([length_is]).
OSF DCE Problem Determination Guide Severity: Varies Component: idl Text: A source IDL filename is required Explanation: The command line does not contain a source IDL file to compile. Action: You must specify a source IDL file. You may have erroneously specified the source IDL file when actually you gave a value to a command option.
Error Messages and Status Codes 0x132830e5 NIDL_STRCHARBYTE Severity: Varies Component: idl Text: The attribute [string] is valid only for one-dimensional array of valid base type Explanation: The ([string]) attribute flags that an array is a string. Strings must be arrays whose base type is one of the following: char, byte, unsigned short, unsigned long, or a structure whose fields are all scalar byte fields.
OSF DCE Problem Determination Guide 0x132830e9 NIDL_STRV1FIXED Severity: Varies Component: idl Text: A [v1_string] must be an array of char with fixed bounds Explanation: A ([v1_string]) is compatible with the NCS Version 1 NIDL (string0) data type. It must be a single dimensioned array of (char) with a zero lower bound and a fixed upper bound. Action: If compatibility with NCS Version 1 NIDL is required, change the declaration accordingly.
Error Messages and Status Codes certain type of error occurs during execution of an operation. Thus, the operation must be declared to deliver a result of data type (error_status_t). Action: Declare the operation result to be of data type (error_status_t).
OSF DCE Problem Determination Guide Action: Use the ([switch_is]) attribute only on instances of nonencapsulated union types. 0x13283127 NIDL_SWDATATYPE Severity: Varies Component: idl Text: Data type of [switch_is] variable %1$s does not agree with [switch_type] %2$s Explanation: The data type of the variable referenced in the ([switch_is]) clause must be the same as the data type referenced in the ([switch_type]) clause of the item’s type definition.
Error Messages and Status Codes Explanation: The UUID specified in the ([uuid]) attribute of an interface is not in a valid format. Action: Make sure the UUID is transcribed correctly and contains the required punctuation. 0x132830f2 NIDL_SYSERRMSG Severity: Varies Component: idl Text: System error message: %1$s Explanation: Identifies the cause of the previous error. Action: See the system documentation for an explanation of the error message.
OSF DCE Problem Determination Guide Explanation: Parameters to which tag attributes (([cs_stag]), ([cs_drtag]), or ([cs_rtag])) are attached must be either (unsigned long) integer values or (unsigned long) integers passed by reference. Action: Change the parameter types as required.
Error Messages and Status Codes 0x13283154 NIDL_TYPENEST Severity: Varies Component: idl Text: Types with the [%1$s] attribute cannot be nested Explanation: A type with the indicated attribute cannot include another type with the same attribute. Action: Do not nest types with the attribute. 0x132830f5 NIDL_TYPENOTFND Severity: Varies Component: idl Text: Type name: %1$s not found Explanation: The type (name) is not declared at this point in the interface declaration.
OSF DCE Problem Determination Guide 0x132830f6 NIDL_TYPLINEATTR Severity: Varies Component: idl Text: Type attributes [in_line] and [out_of_line] cannot occur together Explanation: The ([in_line]) and ([out_of_line]) attributes are opposite in meaning. You can specify at most one of these attributes on a type. Action: Remove one of the conflicting attributes.
Error Messages and Status Codes 0x132830fb NIDL_UNIDISCTYP Severity: Varies Component: idl Text: A union discriminator type must be small, short, long, char, boolean, or enum Explanation: The discriminator of a (union), that determines which case of the (union) is used, is restricted to integer, character, enumeration, and boolean data types. Also, (hyper int) discriminators are not allowed. Action: Change the discriminator to one of the valid data types.
OSF DCE Problem Determination Guide Text: A [unique] function result is not valid Explanation: Unlike ([out]) parameters, there is never any preexisting storage in the caller for pointer-valued function results. The pointer always points to new storage. This is the capability provided only by full pointers, not by ([unique]) pointers. Action: Remove the ([unique]) attribute from the type definition of the data type for the function result.
Error Messages and Status Codes Text: The attribute [uuid] is invalid when the [local] attribute is specified Explanation: The ([local]) interface attribute flags that an interface is not for RPC use, but is only a local header generation mechanism. The ([uuid]) attribute is only used for RPC interfaces. Action: Remove one of the conflicting attributes.
OSF DCE Problem Determination Guide Text: A type used in a [transmit_as] clause cannot have a [represent_as] type Explanation: The type used in a ([transmit_as]) clause specifies an alternative type that a base IDL type is translated to or from and before or after transmission over the network. The type used in a ([represent_as]) clause is an alternative type that a base IDL type is translated from or to at the application code-to-stub code interface.
Error Messages and Status Codes Text: A translated transmittable type cannot contain [%1$s] pointers Explanation: A transmittable type that is derived by calling a translation routine, for example, a (from_local) translation of a ([represent_as]) type or a (to_xmit) translation of a ([transmit_as]) type, cannot contain pointers of the indicated type. Action: Define a transmittable type that does not contain invalid pointers. If using ([represent_as]), reconsider using it.
OSF DCE Problem Determination Guide Text: _______ Explanation: The service attempted to employ the network upon which implementation demends, but was unable to do so. its Action: Wait until the network is available and retry the operation. ---------- OM_NO_SUCH_CLASS Severity: Error Component: Directory Services Text: _______ Explanation: A purported class identifier was not defined.
Error Messages and Status Codes Explanation: The purported syntax identifier is not defined. Action: Ensure that the syntax identifier is defined. ---------- OM_NO_SUCH_TYPE Severity: Error Component: Directory Services Text: _______ Explanation: The puported type identifier is not defiend. Action: Ensure that the type identifier is defined. ---------- OM_NO_SUCH_WORKSPACE Severity: Error Component: Directory Services Text: _______ Explanation: A purported workspace is nonexistent.
OSF DCE Problem Determination Guide Action: This error is returned by om_delete() or om_get(). The om_delete() function operates on a service-generated public object or makes a private object inaccessible. The om_get() function makes an exact, but independent copy of an existing private object, thus you must name a private object.
Error Messages and Status Codes Text: _______ Explanation: The descriptors for the values of a particular attribute are not adjacent. Action: This error is returned by om_put(). Ensure that the descriptors for the values of a particular attribute with two or more values are adjacent to one another in the sequence. ---------- OM_WRONG_VALUE_LENGTH Severity: Error Component: Directory Services Text: _______ Explanation: This error is returned by om_copy_value(), om_put(), and om_write().
OSF DCE Problem Determination Guide Severity: Error Component: Directory Services Text: _______ Explanation: This error is returned by om_copy_value(), om_get(), and om_put(). An object has, or would have, an attribute whose type is not permitted. Action: Correct the attribute type. 0x170830df pwd_exp_cl_bad_arg Severity: Varies Component: sad Text: %s: Unknown command line option %s\n Explanation: user enter an invalid option Action: Check passwd_export manual for correct option.
Error Messages and Status Codes 0x170830eb pwd_exp_env_fail_change_dir Severity: Varies Component: sad Text: Could not change to directory %s ( %s ). Explanation: chdir() system call failed. Action: Check your permission mode for the directory or the directory exists. 0x170830ec pwd_exp_env_fail_getcwd Severity: Varies Component: sad Text: Could not get pathname of current directory ( %s ). Explanation: getcwd() system call failed.
OSF DCE Problem Determination Guide 0x170830e7 pwd_exp_rgy_cannot_close Severity: Varies Component: sad Text: Can’t close connection to registry. Explanation: Cannot close connection to registry server Action: 0x170830e6 pwd_exp_rgy_cannot_open Severity: Varies Component: sad Text: Can’t open connection to registry.
Error Messages and Status Codes Severity: Varies Component: sad Text: Usage: %s [-h] | [-i][-c][-v][-o org][-d dir][-u username] [-p password]\n\n Explanation: passwd_import started with incorrect arguments Action: Run passwd_import with correct options and arguments. \n Consult the passwd_import manual page for details.
OSF DCE Problem Determination Guide Severity: Varies Component: sad Text: - Authentication failure Explanation: Calls to check authentication failed. Action: 0x17083108 pwd_imp_err_bad_ask_y_n Severity: Varies Component: sad Text: Invalid answer - "%s", please answer [yes|no]. Explanation: User type an invalid answer. Action: 0x170830f0 pwd_imp_err_bad_name Severity: Varies Component: sad Text: (Name in question - %s.
Error Messages and Status Codes Severity: Varies Component: sad Text: Explanation: MESSAGE NOT REFERENCED, THEREFORE DELETED. Action: None required 0x170830b9 pwd_imp_err_DEL1 Severity: Varies Component: sad Text: Explanation: MESSAGE NOT REFERENCED, THEREFORE DELETED. Action: None required 0x170830c5 pwd_imp_err_dup_name Severity: Varies Component: sad Text: Name already present in cache, cannot add duplicate entry.
OSF DCE Problem Determination Guide Explanation: Action: 0x170830be pwd_imp_err_gname_exist_nmatch Severity: Varies Component: sad Text: Group name exists in registry but UNIX ids don’t match.\n Explanation: Action: 0x170830b5 pwd_imp_err_gname_too_long Severity: Varies Component: sad Text: Group name too long.\n Explanation: Group name length exceeds maximum rgy name length.
Error Messages and Status Codes Text: Input is too long.\n Explanation: Input exceeds internal data storage. Action: 0x170830f5 pwd_imp_err_internal_cache Severity: Varies Component: sad Text: Internal cache error Explanation: Action: 0x170830ba pwd_imp_err_internal_error Severity: Varies Component: sad Text: Internal error.\n Explanation: Unexpected internal error occurrs. Action: 0x170830c1 pwd_imp_err_invalid_option Severity: Varies Component: sad Text: Invalid option - %s.
OSF DCE Problem Determination Guide Text: Unable to access group file %s (%s). Explanation: This error may be caused by invalid file name or bad permission mode Action: Validate the file name. 0x170830c7 pwd_imp_err_no_memory Severity: Varies Component: sad Text: Cannot allocate requested amount of memory.\n Explanation: Action: 0x170830b1 pwd_imp_err_no_pwd_access Severity: Varies Component: sad Text: Unable to access passwd file %s (%s).
Error Messages and Status Codes 0x170830cc pwd_imp_err_PAD2 Severity: Varies Component: sad Text: UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONS\n Explanation: ? Action: None required 0x170830cd pwd_imp_err_PAD3 Severity: Varies Component: sad Text: UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONS\n Explanation: ? Action: None required 0x170830b0 pwd_imp_err_path_too_long Severity: Varies Component: sad Text: Specified directory name too long (%s).
OSF DCE Problem Determination Guide Action: 0x170830b4 pwd_imp_err_pname_too_long Severity: Varies Component: sad Text: Principal name too long.\n Explanation: Principal name length exceeds maximum rgy name length. Action: 0x170830bf pwd_imp_err_puid_exists Severity: Varies Component: sad Text: Import Principal’s UNIX id exists in registry.\n Explanation: Action: 0x170830c9 pwd_imp_err_unknown_group Severity: Varie s Component: sad Text: Attempted to add membership to unknown group.
Error Messages and Status Codes Action: 0x170830d7 pwd_imp_inf_check_org Severity: Varies Component: sad Text: Verifying that the necessary Organization exists.\n Explanation: For debug tracing.
OSF DCE Problem Determination Guide Action: 0x170830ce pwd_imp_inf_create_groups Severity: Varies Component: sad Text: Creating group objects from group file.\n Explanation: For debug tracing. Action: 0x170830d3 pwd_imp_inf_ignore_conflict Severity: Varies Component: sad Text: Ignoring name conflict, as instructed\n Explanation: Action: 0x170830d4 pwd_imp_inf_need_new_name Severity: Varies Component: sad Text: Would need a new name to resolve conflict.\n Explanation: Name existed in rgy database.
Error Messages and Status Codes 0x170830db pwd_imp_inf_PAD1 Severity: Varies Component: sad Text: UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONS\n Explanation: ? Action: None required 0x170830dc pwd_imp_inf_PAD2 Severity: Varies Component: sad Text: UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONS\n Explanation: ? Action: None required 0x170830dd pwd_imp_inf_PAD3 Severity: Varies Component: sad Text: UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONS\n Explanation: ? Action: None required 0x1
OSF DCE Problem Determination Guide Action: 0x17083105 pwd_imp_msg_add_entry Severity: Varies Component: sad Text: >> Adding %s entry for: %s %d\n Explanation: Action: 0x17083106 pwd_imp_msg_add_entry_gen_unix_id Severity: Varies Component: sad Text: >> Adding %s entry for: %s (generate-UNIX-id)\n Explanation: Action: 0x170830f8 pwd_imp_msg_conflict Severity: Varies Component: sad Text: CONFLICT: (%s %d) Explanation: Action: 0x170830fb pwd_imp_msg_conflict_entry Severity: Varies Component: sad T
Error Messages and Status Codes Text: %s\n Explanation: Action: 0x170830fc pwd_imp_msg_enter_group_name Severity: Varies Component: sad Text: Please enter a name for imported group ( %d ): Explanation: Action: 0x170830fe pwd_imp_msg_enter_new_name Severity: Varies Component: sad Text: Enter new name for %s "%s" "%d": Explanation: Action: 0x17083107 pwd_imp_msg_import Severity: Varies Component: sad Text: >> Import %s: \n Explanation: Action: 0x170830fd pwd_imp_msg_temp_group_name Severity: Varies
OSF DCE Problem Determination Guide 0x17083103 pwd_imp_prompt_enter_unix_id Severity: Varies Component: sad Text: Enter new UNIX id: Explanation: Action: 0x17083102 pwd_imp_prompt_enter_user_name Severity: Varies Component: sad Text: Enter your username: Explanation: Action: 0x17083101 pwd_imp_prompt_print Severity: Varies Component: sad Text: %s Explanation: Print out a prompt.
Error Messages and Status Codes 0x17083100 pwd_imp_qus_group_conflict Severity: Varies Component: sad Text: Do you wish to associate the existing group name with this id? Explanation: Action: 0x170830ee pwd_imp_rgy_bad_org Severity: Varies Component: sad Text: Invalid org name - %s Explanation: enter from -o option is invalid Action: Make sure specify is a valid name.
OSF DCE Problem Determination Guide Action: Report the error to your vendor. 0x16c9a151 rpc_m_call_failed_errno Severity: Varies Component: rpc Text: %s failed, errno = %d Explanation: A call to some internal routine or macro failed. Action: Report the error to your vendor. 0x16c9a150 rpc_m_call_failed_no_status Severity: Varies Component: rpc Text: %s: call failed Explanation: A call to some internal routine or macro failed. Action: Report the error to your vendor.
Error Messages and Status Codes Text: Illegal state transition detected in CN client association state machine [cur_state: %s, cur_event: %s, assoc: %x] Explanation: An internal error occurred. Action: Report the error to your vendor. 0x16c9a147 rpc_m_cn_ill_state_trans_cg Severity: Varies Component: rpc Text: Illegal state transition detected in CN client association group state machine [cur_state: %d, cur_event: %d, grp: %x] Explanation: An internal error occurred.
OSF DCE Problem Determination Guide Explanation: An internal error occurred. Action: Report the error to your vendor. 0x16c9a16d rpc_m_ctxrundown_exc Severity: Varies Component: rpc Text: Exception in routine at %x, running down context %x of client %x Explanation: An exception was caught by the runtime while trying to rundown client context. Action: Fix the context rundown routine to avoid raising the exception, or to CATCH it.
Error Messages and Status Codes Severity: Varies Component: rpc Text: (%s) Event list full Explanation: A state machine’s event list was full when someone tried to put an event on it. Action: Report the error to your vendor. 0x16c9a14c rpc_m_frag_toobig Severity: Varies Component: rpc Text: (receive_packet) assoc->%x frag_length %d in header > fragbuf data size %d Explanation: An internal error occurred. Action: Report the error to your vendor.
OSF DCE Problem Determination Guide Action: Report the error to your vendor. 0x16c9a15d rpc_m_no_stub_data Severity: Varies Component: rpc Text: (%s) No stub data to send Explanation: No stub data was given to a routine to be sent. Action: Report the error to your vendor. 0x16c9a156 rpc_m_nts_not_found Severity: Varies Component: rpc Text: (%s) Negotiated transfer syntax not found in presentation context element Explanation: An internal error occurred. Action: Report the error to your vendor.
Error Messages and Status Codes Severity: Varies Component: rpc Text: (%s) Memory reallocation failed Explanation: A call to realloc failed to return memory. Action: Increase available memory and/or swap space. 0x16c9a15a rpc_m_recvbuf_toosmall Severity: Varies Component: rpc Text: (%s) Socket’s maximum receive buffering is less than NCA Connection Protocol minimum requirement Explanation: Socket buffering available from the operating system is insufficient to support RPC.
OSF DCE Problem Determination Guide 0x16c9a159 rpc_m_unk_ifspec Severity: Varies Component: rpc Text: (%s) Unknown interface spec version Explanation: An internal error occurred. Action: Report the error to your vendor. 0x16c9a15f rpc_m_unk_sock_type Severity: Varies Component: rpc Text: (%s) Unknown socket type Explanation: The socket corresponding to a file descriptor is of an unknown type. Action: Report the error to your vendor.
Error Messages and Status Codes Verify that both client and server have specified a named server endpoint in upper-case characters. For protocol sequences that allow alphanumeric endpoints, specify endpoints in upper-case characters, not mixed lower-case characters. 0x16c9a022 rpc_s_already_listening Severity: Varies Component: rpc Text: Already listening Explanation: A server application called rpc_server_listen, but another thread within the process is currently blocked inside a call to this procedure.
OSF DCE Problem Determination Guide 0x16c9a0ed rpc_s_auth_badaddr Severity: Varies Component: rpc Text: Incorrect network address in authentication request Explanation: Authentication between the client and server failed. Action: This may be an attempt to violate system security. 0x16c9a0f5 rpc_s_auth_baddirection Severity: Varies Component: rpc Text: Incorrect authentication message direction Explanation: Authentication between the client and server failed.
Error Messages and Status Codes 0x16c9a0f7 rpc_s_auth_badseq Severity: Varies Component: rpc Text: Incorrect sequence number in authentication message Explanation: Authentication between the client and server failed. Action: This may be an attempt to violate system security. 0x16c9a0ee rpc_s_auth_badversion Severity: Varies Component: rpc Text: Authentication protocol version mismatch Explanation: Authentication between the client and server failed.
OSF DCE Problem Determination Guide Action: This may be an attempt to violate system security. 0x16c9a0ef rpc_s_auth_msg_type Severity: Varies Component: rpc Text: Invalid authentication message type Explanation: An invalid message was received during the authentication exchange. Action: This may be an attempt to violate system security. 0x16c9a0f4 rpc_s_auth_mut_fail Severity: Varies Component: rpc Text: Mutual authentication failed Explanation: Authentication between the client and server failed.
Error Messages and Status Codes Severity: Varies Component: rpc Text: Authentication ticket is not for destination Explanation: Authentication failed at the server because the ticket was not valid for this server. Action: This may indicate an attempt to violate system security. 0x16c9a0e9 rpc_s_auth_repeat Severity: Varies Component: rpc Text: Authentication request is a replay Explanation: A retransmission of an old request has been detected.
OSF DCE Problem Determination Guide Explanation: An application manager routine tried to inquire about authentication information from a client binding handle but the client did not establish any authentication on the call. Action: The manager routine can either ignore the error or refuse to execute the call. The application writer can change the client to use authentication.
Error Messages and Status Codes Severity: Varies Component: rpc Text: Call ID in packet unknown Explanation: An internal error occurred. Action: Report the error to your vendor. 0x16c9a05e rpc_s_call_orphaned Severity: Varies Component: rpc Text: Call orphaned Explanation: A client application has given up waiting for a manager routine to return. This error occurs at the server but is usually not seen by the server application. Action: None required.
OSF DCE Problem Determination Guide Explanation: A cancel was posted to a thread making a remote call, a non-infinite cancel timeout was previously specified (by rpc_mgmt_set_cancel_timeout), and the manager routine did not respond to the cancel within the cancel timeout period. Action: None required. 0x16c9a037 rpc_s_cannot_accept Severity: Varies Component: rpc Text: Cannot accept Explanation: An internal error occurred.
Error Messages and Status Codes receive remote calls. Action: Make sure the underlying network transport service is working. Try a non-RPC application that uses this service (for example, file transfer or remote login). 0x16c9a05c rpc_s_cant_get_if_id Severity: Varies Component: rpc Text: Cannot get interface ID Explanation: The RPC runtime tried to get information about a communications socket but failed due to an underlying network transport service problem.
OSF DCE Problem Determination Guide Action: Upgrade either the name service entry or client to the appropriate version. 0x16c9a01a rpc_s_coding_error Severity: Varies Component: rpc Text: RPC coding error Explanation: An internal error occurred. Action: Report the error to your vendor.
Error Messages and Status Codes rpc_binding_to_string_binding or rpc_binding_server_from_client may see this status. Both routines require connection information that is no longer available. This can occur if the executing remote procedure was specified to be an operation with the IDL maybe attribute, or if the remote procedure call has been orphaned. Action: Verify the underlying connection and retry the operation. In the case of the orphaned call, the client can try to reissue the call.
OSF DCE Problem Determination Guide Text: Credentials too large for packet Explanation: The security credentials are too large to fit into an RPC message. Action: The size of the security credentials is related to the number of groups to which a principal belongs. Reducing the group membership count can reduce the size of the credentials. 0x16c9a0c9 rpc_s_cthread_create_failed Severity: Varies Component: rpc Text: cthread create failed Explanation: An internal error occurred.
Error Messages and Status Codes Action: Report the error to your vendor. 0x16c9a0ba rpc_s_cycle_detected Severity: Varies Component: rpc Text: Cycle detected Explanation: A cycle was detected in the course of traversing groups and profiles in the binding import operation. Action: Modify the structure of groups and profiles in the name service database to eliminate the cycle.
OSF DCE Problem Determination Guide Severity: Varies Component: rpc Text: Entry not found Explanation: The specified name service object (profile, group, or entry) does not exist in the name service database. Action: Verify that the object or directory name supplied to the name service (NSI) operation exists and repeat the operation.
Error Messages and Status Codes Text: Fault floating point divide by zero Explanation: An application manager routine attempted to do a floating point division with a denominator of zero. Action: Fix the manager routine. 0x16c9a077 rpc_s_fault_fp_error Severity: Varies Component: rpc Text: Fault floating point error Explanation: An application manager routine failed in the execution of a floating point operation. Action: Fix the manager routine.
OSF DCE Problem Determination Guide Action: Fix the manager routine. 0x16c9a07c rpc_s_fault_int_overflow Severity: Varies Component: rpc Text: Fault integer overflow Explanation: An integer calculation in an application manager routine resulted in an arithmetic overflow. Action: Fix the manager routine.
Error Messages and Status Codes 0x16c9a081 rpc_s_fault_pipe_discipline Severity: Varies Component: rpc Text: Fault pipe discipline Explanation: An application manager routine returned control to the server stub while there was still pipe data to be read or written. Action: Fix the application.
OSF DCE Problem Determination Guide Text: Fault remote no memory Explanation: A server stub or application manager routine was unable to allocate heap storage. Action: If the failure is caused by overuse of underlying system resources (for example, address space or swap space), reduce the application’s direct use of these resources if possible.
Error Messages and Status Codes 0x16c9a107 rpc_s_helper_catatonic Severity: Varies Component: rpc Text: Helper process catatonic Explanation: The user-space helper took longer than two to three minutes to respond to a request from the kernel. This indicates that the helper process or the services it depends on are malfunctioning or overloaded. Action: Ease network congestion, fix bugs, or increase the hard-coded timeout in the kernel.
OSF DCE Problem Determination Guide 0x16c9a049 rpc_s_host_unreachable Severity: Varies Component: rpc Text: Remote host is unreachable Explanation: The specified host is unreachable. Action: Check the network connectivity. Retry the operation. 0x16c9a00d rpc_s_in_args_too_big Severity: Varies Component: rpc Text: Input arguments too big Explanation: The size of the input arguments to a remote call was larger than is allowed in the current context.
Error Messages and Status Codes Action: Check the supplied arguments against documentation for the call. 0x16c9a01d rpc_s_invalid_binding Severity: Varies Component: rpc Text: Invalid binding Explanation: An application passed a binding handle to the RPC runtime that is invalid (for example, because it specifies an unsupported protocol).
OSF DCE Problem Determination Guide Action: Check your security server and also make sure that you have logged in properly. 0x16c9a04e rpc_s_invalid_endpoint_format Severity: Varies Component: rpc Text: Invalid endpoint format for remote host Explanation: An endpoint string with invalid syntax was supplied as input to the RPC runtime. Action: Use valid endpoint string syntax.
Error Messages and Status Codes 0x16c9a0d9 rpc_s_invalid_ns_handle Severity: Varies Component: rpc Text: Invalid name service handle Explanation: An invalid name service handle was passed to a begin, next, or done operation. Action: Verify that the name service handle is non-null and was successfully created in a begin operation.
OSF DCE Problem Determination Guide 0x16c9a028 rpc_s_invalid_timeout Severity: Varies Component: rpc Text: Invalid timeout Explanation: An application rpc_mgmt_set_com_timeout. specified an invalid timeout value to Action: Supply a valid timeout value. 0x16c9a0bd rpc_s_invalid_vers_option Severity: Varies Component: rpc Text: Invalid interface version option Explanation: The specified vers_option argument value was invalid.
Error Messages and Status Codes Text: Connection aborted by local host Explanation: The client’s attempt to connect to the server was aborted by the local system. Action: Check network and system resource availability. Retry operation. 0x16c9a06e rpc_s_manager_not_entered Severity: Varies Component: rpc Text: Manager not entered Explanation: An internal status code. Action: None required.
OSF DCE Problem Determination Guide Action: Fix the program to pass a valid NSI attribute type. 0x16c9a06d rpc_s_mgmt_op_disallowed Severity: Varies Component: rpc Text: Management operation disallowed Explanation: A client application called one of the local or remote management RPC runtime functions and the remote server refused to execute it. Action: None required.
Error Messages and Status Codes 0x16c9a0c1 rpc_s_no_entry_name Severity: Varies Component: rpc Text: No entry name Explanation: The binding handle does not refer to a name service entry name. Binding handles returned from the import and lookup operations refer to the name of the name service entry where the binding information was found. Binding handles obtained from other sources (for example, from a string binding), do not refer to an entry name.
OSF DCE Problem Determination Guide 0x16c9a012 rpc_s_no_memory Severity: Varies Component: rpc Text: No memory for RPC runtime Explanation: The RPC runtime was unable to allocate heap storage, or a fixed buffer supplied to IDL Encoding Services was not large enough.
Error Messages and Status Codes 0x16c9a0a8 rpc_s_no_ns_permission Severity: Varies Component: rpc Text: No permission for name service operation Explanation: The application program attempted to perform a name service operation that required permissions which the process did not possess. Action: Make sure that the application has the requisite name service permission and retry the operation.
OSF DCE Problem Determination Guide Severity: Varies Component: rpc Text: Not found Explanation: The specified name service entry was not found in the name service database. This entry could have been specified directly or indirectly through a profile or group. Action: Report the error to your vendor.
Error Messages and Status Codes 0x16c9a0b7 rpc_s_not_rpc_entry Severity: Varies Component: rpc Text: Not an RPC entry Explanation: An internal status code. Action: None required. 0x16c9a069 rpc_s_not_rpc_tower Severity: Varies Component: rpc Text: Not an RPC tower Explanation: An internal status code. The protocol tower from the name service is not an RPC tower. Action: Report the error to your vendor.
OSF DCE Problem Determination Guide 0x16c9a117 rpc_s_partial_credentials Severity: Varies Component: rpc Text: Credentials have been fragmented Explanation: The client’s credentials were too large to fit in a single datagram packet. The client fragments them, and is returning only one fragment at this time. Action: The server must use the conv_who_are_you_auth_more call to retrieve the remaining fragments of the client’s credentials.
Error Messages and Status Codes Action: None required. 0x16c9a101 rpc_s_protect_level_mismatch Severity: Varies Component: rpc Text: Protection level changed unexpectedly Explanation: The runtime detected an unexpected change to the protection level. Action: This usually does not happen. Check for version skew between client and server, bugs in the client or server runtime, or modifications to packets sent over the network.
OSF DCE Problem Determination Guide Severity: Varies Component: rpc Text: Remote host is down Explanation: The remote system is down. Action: Retry the operation when the remote system is available or select a different system. 0x16c9a045 rpc_s_rem_network_shutdown Severity: Varies Component: rpc Text: Network is down Explanation: The network connection has been shutdown. initiated by the client, server, or management application.
Error Messages and Status Codes Severity: Varies Component: rpc Text: Invalid state machine state Explanation: An internal error occurred. Action: Report the error to your vendor. 0x16c9a0df rpc_s_socket_failure Severity: Varies Component: rpc Text: Persistent errors on socket Explanation: The RPC runtime encountered repeated errors using a communication socket. Action: Make sure the underlying network transport service is working.
OSF DCE Problem Determination Guide 0x16c9a0dc rpc_s_ss_char_trans_short_file Severity: Varies Component: rpc Text: File containing ASCII/EBCDIC translation tables is damaged Explanation: The file named in the environment variable DCERPCCHARTRANS contains less than 512 bytes. Action: Either make a valid file available, or unset DCERPCCHARTRANS and use the default ASCII/EBCDIC translation tables.
Error Messages and Status Codes 0x16c9a0de rpc_s_ss_in_null_context Severity: Varies Component: rpc Text: Null value of [in] context handle or all [in,out] context handles Explanation: If an operation has [in] or [in,out] context handle parameters, the binding for that operation is determined using those parameters. A null context handle does not refer to valid binding information. Action: Make sure that all [in] context handles are non-null.
OSF DCE Problem Determination Guide Text: No compatible code set found Explanation: Code set compatibility evaluation does not fall back to the universal encoding when rpc_cs_eval_without_universal is called. This status code indicates that rpc_cs_eval_without_universal was called when the server and client did not have a common encoding that both could recognize and convert. Action: Application dependent.
Error Messages and Status Codes Explanation: The client could not establish a connection with the server because there are too many open connections at the remote server system. Action: Retry the operation at a different server or when the current server’s load decreases. 0x16c9a057 rpc_s_tsyntaxes_unsupported Severity: Varies Component: rpc Text: Transfer syntaxes unsupported Explanation: An internal error occurred. The proposed transfer syntax is not supported by the server.
OSF DCE Problem Determination Guide 0x16c9a0d8 rpc_s_underspecified_name Severity: Varies Component: rpc Text: Name is underspecified Explanation: The syntax of a specified entry name indicated a global name. However, the cell name portion does not resolve to a cell. For example, this status code would be returned if the cell name is /.../c=us/o=osf/ou=dce, but the cell name portion of the specified entry name is /.../c=us or /.../c=us/o=osf.
Error Messages and Status Codes Severity: Varies Component: rpc Text: Interface’s version is unknown Explanation: An application supplied an interface handle that referred to an interface that specified an unknown interface format version. (The interface format version specifies how the interface specification is laid out internally. Do not confuse it with the contents of the IDL version field in an interface definition.
OSF DCE Problem Determination Guide security processing. In this case the sender of a remote procedure call requested the receiver to use an algorithm that the receiver (the server system) does not support. Action: This may be an attempt to violate system security. 0x16c9a0a6 rpc_s_unsupported_name_syntax Severity: Varies Component: rpc Text: Unsupported name syntax Explanation: The value specified for the entry name syntax was valid, but not supported.
Error Messages and Status Codes procedure call made to a different server instance than the one originally associated with the binding handle results in the remote procedure call failing with this status code. An application may also see this status code returned from the rpc_mgmt_ep_elt_inq_begin routine. In this case, the endpoint map service rebooted during the lifetime of the inquiry context.
OSF DCE Problem Determination Guide 0x17122ee1 rsdb_journal_create_fail Severity: Error Component: sec / sec_s_rs_rsdb Text: Cannot create registry journal file Explanation: ? Action: ? 0x17122ee2 rsdb_journal_hdr_write_failed Severity: Error Component: sec / sec_s_rs_rsdb Text: Cannot create to registry journal header Explanation: ? Action: ? 0x17122ee0 rsdb_journal_open Severity: Error Component: sec / sec_s_rs_rsdb Text: Journal file already open Explanation: ? Action: ? 0x17122ee5 rsdb_login_cant_
Error Messages and Status Codes Explanation: Internal error. Action: Notify support personnel. 0x17122032 sec_acl_bad_parameter Severity: Varies Component: sec Text: bad parameter for acl operation Explanation: Internal error, should never occur. Action: Notify support personnel. 0x17122037 sec_acl_bad_permset Severity: Varies Component: sec Text: permission set is not valid for this acl manager type Explanation: One or more permissions not valid for this type of ACL.
OSF DCE Problem Determination Guide Text: SEC_ACL_EDIT_PAD1 Explanation: ? Action: None required 0x170830a2 SEC_ACL_EDIT_PAD2 Severity: Varies Component: sad Text: SEC_ACL_EDIT_PAD2 Explanation: ? Action: None required 0x170830a3 SEC_ACL_EDIT_PAD3 Severity: Varies Component: sad Text: SEC_ACL_EDIT_PAD3 Explanation: ? Action: None required 0x170830a4 SEC_ACL_EDIT_PAD4 Severity: Varies Component: sad Text: SEC_ACL_EDIT_PAD4 Explanation: ? Action: None required 0x170830a5 SEC_ACL_EDIT_PAD5 Severity: Vari
Error Messages and Status Codes Severity: Varies Component: sad Text: SEC_ACL_EDIT_PAD7 Explanation: ? Action: None required 0x170830a8 SEC_ACL_EDIT_PAD8 Severity: Varies Component: sad Text: SEC_ACL_EDIT_PAD8 Explanation: ? Action: None required 0x170830a9 SEC_ACL_EDIT_PAD9 Severity: Varies Component: sad Text: SEC_ACL_EDIT_PAD9 Explanation: ? Action: None required 0x170830aa SEC_ACL_EDIT_PADa Severity: Varies Component: sad Text: SEC_ACL_EDIT_PADa Explanation: ? Action: None required 0x170830ab SE
OSF DCE Problem Determination Guide 0x170830ad SEC_ACL_EDIT_PADd Severity: Varies Component: sad Text: SEC_ACL_EDIT_PADd Explanation: ? Action: None required 0x170830ae SEC_ACL_EDIT_PADe Severity: Varies Component: sad Text: SEC_ACL_EDIT_PADe Explanation: ? Action: None required 0x170830af SEC_ACL_EDIT_PADf Severity: Varies Component: sad Text: SEC_ACL_EDIT_PADf Explanation: ? Action: None required 0x1712201e sec_acl_expected_group_obj Severity: Varies Component: sec Text: acl operation expected gro
Error Messages and Status Codes 0x17122020 sec_acl_invalid_acl_type Severity: Varies Component: sec Text: acl type not valid Explanation: Specified ACL type is out of the valid range for this type. Action: Ensure that the specified ACL entry type is valid. If this error is encountered within the DCE base components, notify support personnel. 0x17122035 sec_acl_invalid_dfs_acl Severity: Varies Component: sec Text: not a valid DFS acl Explanation: DFS ACL manager does not understand the specified ACL.
OSF DCE Problem Determination Guide Text: acl manager type invalid Explanation: Invalid ACL manager type specified. Action: If this error is enountered in an application, then that app needs to be fixed to obtain the correct ACL manager type and specify that type. If this error is encountered within the DCE base components, then notify support personnel.
Error Messages and Status Codes 0x1712202a sec_acl_name_resolution_failed Severity: Varies Component: sec Text: name resolution failed on acl operation Explanation: Name resolution failed on the requested ACL operation. Action: Ensure that a valid object name was specified. 0x1712201b sec_acl_no_acl_found Severity: Varies Component: sec Text: no acl found Explanation: Object found, but object has no ACL associated with it.
OSF DCE Problem Determination Guide Action: Try again later, the update site may be currently unavailable. 0x1712201a sec_acl_object_not_found Severity: Varies Component: sec Text: acl object not found Explanation: Specified ACL object was not found. Action: Check to make sure the object was specified correctly. 0x1712202b sec_acl_rpc_error Severity: Varies Component: sec Text: rpc error on acl operation Explanation: An RPC error was returned during the ACL operation. Action: Retry the operation.
Error Messages and Status Codes Text: acl manager type not recognized Explanation: Programming error, should not happen. Action: Notify support personnel of the problem. 0x17122151 sec_attr_bad_acl_mgr_set Severity: Varies Component: sec Text: invalid acl_mgr_set specified Explanation: Application specified an invalid acl manager set for this operation. Action: Determine the correct acl manager set and retry the operation.
OSF DCE Problem Determination Guide 0x17122160 sec_attr_bad_bind_prot_level Severity: Varies Component: sec Text: invalid protection level specified in binding auth_info Explanation: Application specified an invalid protection level in the binding auth info. Action: Retry operation with the correct protection level specified.
Error Messages and Status Codes Action: Select the appropriate intercell action and retry the operation. 0x17122157 sec_attr_bad_name Severity: Varies Component: sec Text: invalid attribute name specified Explanation: Attribute name specified is NULL or exceeds 1024 characters. Action: Select an appropriate attribute name and retry the operation.
OSF DCE Problem Determination Guide Explanation: Application specified a trigger type other than query in this operation. Only query triggers are supported in this release. Action: If a query trigger can be used, retry the operation with the query trigger specified. 0x17122150 sec_attr_bad_type Severity: Varies Component: sec Text: invalid or unsupported attribute type Explanation: Application performing a lookup using the specified attribute type was unsuccessful.
Error Messages and Status Codes 0x17122144 sec_attr_inst_not_found Severity: Varies Component: sec Text: attribute instance not found Explanation: Application specified an attribute instance that was not found. Action: Specify the correct attribute, or make sure the attribute has been placed on the specified object and retry the operation.
OSF DCE Problem Determination Guide Explanation: Application specified an operation that has not yet been implemented. Action: The application must not make use of this operation. 0x17122167 sec_attr_not_multi_valued Severity: Varies Component: sec Text: this attribute type does not support multi-valued updates Explanation: Application specified more than one attribute instance for a type that is not multi valued. Action: Specify a single attribute instance for this type and retry the operation.
Error Messages and Status Codes Severity: Varies Component: sec Text: schema entry not found Explanation: Application specified a schema entry that does not exist. Action: Specify a valid schema entry and retry the operation. 0x1712216e sec_attr_sch_reserved Severity: Varies Component: sec Text: can’t delete schema entry with reserved flag set Explanation: Cannot delete schema entry with reserved flag set.
OSF DCE Problem Determination Guide 0x17122149 sec_attr_unauthorized Severity: Varies Component: sec Text: unauthorized to perform this operation Explanation: The object’s ACL denied the attempted operation. Action: An identity that is granted the right to perform the requested operation must be used. 0x1712216f sec_attr_unique_no_update Severity: Varies Component: sec Text: can’t update the unique flag from set to unset Explanation: Schema unique flag cannot be unset.
Error Messages and Status Codes Action: Ensure that the string array is properly formed and that each of the attribute value strings are less than 1024 and retry the operation. 0x1712217d sec_authn_s_bad_seal Severity: Varies Component: sec Text: integrity error: EPAC seal mismatch. Explanation: Data corruption, or an attacker asserting credentials that don’t match the credentials that were actually granted. If error is reproducible, then it’s most likely a defect in DCE.
OSF DCE Problem Determination Guide 0x17122dd8 sec_crdb_cant_add_replica Severity: Fatal Component: sec / sec_s_rs_create_db Text: Cannot add new replica to master registry\n%s Explanation: ? Action: ? 0x17122ddc sec_crdb_cant_bind_updsite Severity: Fatal Component: sec / sec_s_rs_create_db Text: Cannot locate and bind to master registry\n%s Explanation: ? Action: ? 0x17122ddd sec_crdb_cant_com_master Severity: Fatal Component: sec / sec_s_rs_create_db Text: Cannot communicate with master registry\n%s
Error Messages and Status Codes 0x17122dd7 sec_crdb_cant_register_ns Severity: Fatal Component: sec / sec_s_rs_create_db Text: Cannot register with nameservice\n%s Explanation: ? Action: ? 0x17122dd4 sec_crdb_cant_setup_rgycreator Severity: Fatal Component: sec / sec_s_rs_create_db Text: Problem setting up rgy_creator\n%s Explanation: ? Action: ? 0x17122dd9 sec_crdb_cant_upd_rgyst_file Severity: Fatal Component: sec / sec_s_rs_create_db Text: Cannot update rgy_state file\n%s Explanation: ? Action: ? 0
OSF DCE Problem Determination Guide 0x17122dcd sec_crdb_cl_long_passwd Severity: Error Component: sec / sec_s_rs_create_db Text: default_passwd too long. Explanation: Password longer than the permitted maximum. Action: ? 0x17122dcc sec_crdb_cl_long_rgyname Severity: Error Component: sec / sec_s_rs_create_db Text: Name specified with option %s longer than %d Explanation: Registry name is longer than the permitted maximum.
Error Messages and Status Codes -pa[ssword] default_password -v[erbose] ] Explanation: ? Action: ? 0x17122dc6 sec_crdb_cr_db_succ Severity: Notice Component: sec / sec_s_rs_create_db Text: Successfully created registry database Explanation: This is an informational message Action: None required.
OSF DCE Problem Determination Guide Severity: Fatal Component: sec / sec_s_rs_create_db Text: Cannot inherit local host identity\n%s Explanation: ? Action: ? 0x17122dda sec_crdb_rep_not_registered Severity: Warning Component: sec / sec_s_rs_create_db Text: Replica not registered with nameservice Explanation: The security replica has not successfully registered with the nameservice Action: ? 0x17122dc0 sec_crdb_site_file_create_fail Severity: Warning Component: sec / sec_s_rs_create_db Text: pe_site fi
Error Messages and Status Codes Action: None required. 0x17122132 sec_cred_s_authz_cannot_comply Severity: Varies Component: sec Text: authz service cannot supply the requested credentials Explanation: Application programming error. The server is asking for information that the authorization service used for the call cannot supply (eg, calling sec_cred_get_initiator() when the call had used authz_name). Action: Fix application code.
OSF DCE Problem Determination Guide Severity: Varies Component: sec Text: Cell UUID does not correspond to a valid cell name Explanation: Specified cell UUID does not match any known cell names. Action: Ensure that a known cell UUID is specified. 0x171220d4 sec_id_e_name_too_long Severity: Varies Component: sec Text: Name is too long for current implementation Explanation: The specified name is too long for the current implementation. Action: Ensure that a valid name is specified.
Error Messages and Status Codes 0x17122047 sec_key_mgmt_e_key_unsupported Severity: Varies Component: sec Text: A requested key type is not supported Explanation: A key with a type unknown to this version of DCE was specified. Action: Ensure that operation was specified correctly. 0x17122048 sec_key_mgmt_e_key_version_ex Severity: Varies Component: sec Text: Specified key already exists in key store Explanation: Specified key already exists in the specified key table. Action: None required.
OSF DCE Problem Determination Guide Action: None required. 0x17122cc5 sec_lksm_create_acct Severity: Varies Component: sec Text: Account for %s doesn’t exist. Should this be created ? Explanation: This will be followed by the message in sec_lksm_def_yes_prompt. Action: None required.
Error Messages and Status Codes Severity: Varies Component: sec Text: Setting policy account lifespan to %d minutes (or %d hours or %d days)\n Explanation: ? Action: None required. 0x17122cc9 sec_lksm_set_acct_valid Severity: Varies Component: sec Text: Setting account valid flag for %s account\n Explanation: ? Action: None required.
OSF DCE Problem Determination Guide 0x17122ccd sec_lksm_set_polpwd_expire_now Severity: Varies Component: sec Text: Setting policy password expiration time to %d minutes from now\n Explanation: ? Action: None required. 0x17122cc6 sec_lksm_set_pwd_valid Severity: Varies Component: sec Text: Setting password valid flag for %s account\n Explanation: Setting password valid flag for the specified account. Action: None required.
Error Messages and Status Codes 0x171220e9 sec_login_s_auth_local Severity: Varies Component: sec Text: Operation not valid on local context Explanation: ? Action: None required. 0x17122100 sec_login_s_compound_delegate Severity: Varies Component: sec Text: Login context already specifies a delegation chain. Explanation: Attempted to call become_initiator with a login context that already contained a delegation chain. Action: Do not attempt to become an initiator if already a delegate.
OSF DCE Problem Determination Guide Action: Server must not use delegation/impersonation, or initiator must enable it. 0x171220ed sec_login_s_groupset_invalid Severity: Varies Component: sec Text: Groupset not valid Explanation: ? Action: None required. 0x171220ea sec_login_s_handle_invalid Severity: Varies Component: sec Text: Context handle not valid Explanation: Specified login handle does not correspond to a login context. Action: This is most likely a programming error that needs to be fixed.
Error Messages and Status Codes Explanation: Specified compatibility mode is not supported. Action: Specify a valid compatibility mode. 0x171220ff sec_login_s_invalid_deleg_type Severity: Varies Component: sec Text: Invalid delegation type selection. Explanation: Specified delegation type is not supported. Action: Specify a valid delegation type. 0x171220fd sec_login_s_invalid_password Severity: Varies Component: sec Text: Invalid password. Explanation: The specified password is invalid.
OSF DCE Problem Determination Guide Text: login context has not been certified Explanation: Warning only. Information was obtained from a login context that has been validated but not certified. Action: None required if certification is not desired for this data. 0x171220e7 sec_login_s_not_implemented Severity: Varies Component: sec Text: Operation not yet implemented Explanation: Specified operation is not yet implemented in this version of DCE.
Error Messages and Status Codes Action: Contact a system administrator. 0x171220f1 sec_login_s_privileged Severity: Varies Component: sec Text: privileged operation invoked in unprivileged process Explanation: Privilege operation was attempted in an unprivileged (non-root) process. Action: Only attempt this operation in a privileged (root, uid 0) process.
OSF DCE Problem Determination Guide Explanation: User specified a max entry value smaller than current number of entries. Action: Specify a maximum number of entries that is at least as large as the current number of local registry entries. 0x1712211a sec_lrgy_s_no_access Severity: Varies Component: sec Text: cannot access local registry Explanation: Local registry exists, but cannot be accessed. Action: Administrator should ensure that login programs are able to access the local registry files.
Error Messages and Status Codes 0x17122063 sec_priv_s_bad_compat_mode Severity: Varies Component: sec Text: invalid compatibility mode Explanation: An out of range compat mode parameter was passed to the privilege server. Action: Notify support personnel. 0x17122064 sec_priv_s_bad_deleg_type Severity: Varies Component: sec Text: invalid delegation type Explanation: Specified delegation type is not valid. Action: Ensure that a valid delegation type is specified.
OSF DCE Problem Determination Guide Action: Initiator or previous delegate(s) must refresh credentials before the operation can be performed. 0x17122069 sec_priv_s_intercell_deleg_req Severity: Varies Component: sec Text: privilege service delegation requests cannot cross cell boundaries Explanation: Intercell delegation requests are not yet supported. Action: Do not attempt to perform this delegation request across cell boundaries.
Error Messages and Status Codes Severity: Varies Component: sec Text: protocol level invalid Explanation: Privilege client code passed in an invalid protection level. Action: Notify support personnel. 0x17122061 sec_priv_s_invalid_request Severity: Varies Component: sec Text: malformed request Explanation: Invalid request probably caused by defect in DCE, or corrupted data passed in. Action: Notify support personnel.
OSF DCE Problem Determination Guide Action: Log out and log back in, or use kinit to refresh credentials. 0x17122062 sec_priv_s_PAD00 Severity: Varies Component: sec Text: random kerberos error occurred. Explanation: Obsolete error code. Action: None required. 0x1712205a sec_priv_s_server_unavailable Severity: Varies Component: sec Text: priv server unavailable Explanation: Unable to locate an accessible privilege server. Action: Retry the operation.
Error Messages and Status Codes Explanation: Propagation thread tried but could not obtain information about the current master security server in the cell. This is an internal error. Action: Log a defect. 0x17122e40 sec_prop_no_prop_thrs Severity: Error Component: sec / sec_s_rs_prop Text: Propagation threads not created Explanation: The security server creates several propagation threads to manage the propagation of updates between the master and slave security servers.
OSF DCE Problem Determination Guide 0x17122e44 sec_prop_succ Severity: Notice Component: sec / sec_s_rs_prop Text: Propagation succeeded Explanation: The propagation has completed successfully. Action: None required. 0x17122e49 sec_prop_updates_to_slaves Severity: Notice Component: sec / sec_s_rs_prop Text: propagate updates to slaves Explanation: ? Action: None required.
Error Messages and Status Codes Action: An administrator should ensure proper configuration of the password management server.
OSF DCE Problem Determination Guide Explanation: ? Action: Log a defect.
Error Messages and Status Codes Text: Replica is in maintenance state but is not the master Explanation: Only a master security server can be in the maintenance mode not a slave.
OSF DCE Problem Determination Guide Severity: Warning Component: sec / sec_s_rs_rep Text: propagation type not init or initing Explanation: ? Action: ? 0x17122e76 sec_rep_recv_become_master Severity: Notice Component: sec / sec_s_rs_prop Text: Slave received become master message Explanation: ? Action: None required. 0x17122e75 sec_rep_recv_i_am_master Severity: Notice Component: sec / sec_s_rs_prop Text: Slave received i_am_master message Explanation: ? Action: None required.
Error Messages and Status Codes 0x17122cd8 sec_res_acct_add_err Severity: Error Component: sec / sec_s_rs Text: Error adding an account Explanation: ? Action: ? 0x17122cd9 sec_res_attr_sch_add_err Severity: Error Component: sec / sec_s_rs Text: Error adding an entry to the attribute schema Explanation: ? Action: ? 0x17122cd3 sec_res_host_key_set_err Severity: Error Component: sec / sec_s_rs Text: Error setting local host’s key Explanation: ? Action: Try deleting old entry ( this was hardcoded in the t
OSF DCE Problem Determination Guide 0x17122cd5 sec_res_uuid_cvt_err Severity: Error Component: sec / sec_s_rs Text: Error converting cell uuid to string Explanation: ? Action: ? 0x17122d13 sec_rgy_acl_init Severity: Fatal Component: sec / sec_s_rs_main Text: Cannot initialize ACL manager\n%s Explanation: Initializing for sec_acl wire interface failed. Action: ? 0x17122096 sec_rgy_alias_not_allowed Severity: Varies Component: sec Text: Cant add alias for this name or principal (e.g.
Error Messages and Status Codes 0x17122084 sec_rgy_bad_data Severity: Varies Component: sec Text: Invalid data record Explanation: Invalid data encountered during specified registry operation. Action: Ensure proper data is being passed by the client. 0x17122074 sec_rgy_bad_domain Severity: Varies Component: sec Text: Operation not supported on specified domain Explanation: Attempted an operation that is not supported by the specified domain.
OSF DCE Problem Determination Guide Action: Notify support personnel. 0x17122eab sec_rgy_bad_rgy_db Severity: Error Component: sec / sec_s_rs_rsdb Text: Bad rgy database state. Explanation: ? Action: sec_create_db probably failed. Try rerunning it 0x17122093 sec_rgy_bad_scope Severity: Varies Component: sec Text: scope doesn’t name existing directory or pgo Explanation: Attempted to set scope to a name that does not exist in the registry. Action: Ensure that a valid name is used for scope operation.
Error Messages and Status Codes Explanation: ? Action: None required.
OSF DCE Problem Determination Guide Text: Saving relation %s Explanation: ? Action: None required. 0x17122ee8 sec_rgy_compat_log_replay Severity: Notice Component: sec / sec_s_rs_rsdb Text: Compatability log replay entered Explanation: ? Action: None required.
Error Messages and Status Codes Severity: Varies Component: sec Text: Unable to create directory Explanation: Unable to create a directory necessary for the specified operation. Action: Ensure you have privileges to invoke the specified operation. 0x1712208a sec_rgy_dir_move_illegal Severity: Varies Component: sec Text: Directory move not allowed Explanation: Attempted to make a parent directory the child of one of its descendents Action: Don’t do that.
OSF DCE Problem Determination Guide 0x17122d16 sec_rgy_host_identity Severity: Fatal Component: sec / sec_s_rs_main Text: Cannot get host identity\n%s Explanation: Cannot inherit host machine context and identity Action: ? 0x1712207f sec_rgy_incomplete_login_name Severity: Varies Component: sec Text: Incomplete login name specification Explanation: Specified login name structure was not completely specified. Action: Ensure proper usage of the sec_rgy_login_name_t structure.
Error Messages and Status Codes Action: ? 0x171220a4 sec_rgy_log_entry_out_of_range Severity: Varies Component: sec Text: Invalid log entry module or operation Explanation: Internal error. Action: Notify support personnel.
OSF DCE Problem Determination Guide Text: Illegal cell name : %s Explanation: The cell name must begin with /.../ but it does not.
Error Messages and Status Codes Severity: Fatal Component: sec / sec_s_rs_mkey Text: Cannot create master_key.
OSF DCE Problem Determination Guide 0x17122079 sec_rgy_no_more_entries Severity: Varies Component: sec Text: No more matching entries Explanation: End of list encountered while performing registry lookup. Action: Stop performing lookup operation when this code is returned. 0x1712208d sec_rgy_no_more_unix_ids Severity: Varies Component: sec Text: Unix id space for domain has been exhausted Explanation: No more available Unix IDs within allowable range.
Error Messages and Status Codes Explanation: The principal specified in the account operation is not a member of the specified group or organization. Action: The principal should be added to the specified group and organization before this operation is attempted. 0x1712207d sec_rgy_not_member_org Severity: Varies Component: sec Text: User is not member of specified org Explanation: The principal specified in the account operation is not a member of the specified organization.
OSF DCE Problem Determination Guide 0x1712207a sec_rgy_object_not_found Severity: Varies Component: sec Text: Registry object not found Explanation: Specified registry object was not found. Action: Ensure that object is specified correctly and that caller is granted read access to the object. 0x17122094 sec_rgy_object_not_in_scope Severity: Varies Component: sec Text: object found was not in scope Explanation: Attempted to lookup object that doesn’t exist within the current scope.
Error Messages and Status Codes Explanation: Specified password is shorter than the current minimum limit. Action: Specify a longer password. 0x1712208b sec_rgy_quota_exhausted Severity: Varies Component: sec Text: Principal quota exhausted Explanation: Principal’s registry quota is exhausted and an update operation was attempted. Action: Ensure that correct identity is used to perform operation. Increase quota if necessary.
OSF DCE Problem Determination Guide 0x171220c2 sec_rgy_rep_bad_arg Severity: Varies Component: sec Text: bad argument Explanation: Invalid operation. Action: None required. 0x171220b6 sec_rgy_rep_bad_binding Severity: Varies Component: sec Text: bad binding Explanation: Bad binding encountered by the registry server. Action: Notify support personnel.
Error Messages and Status Codes Action: Notify support personnel. 0x171220b4 sec_rgy_rep_bad_state Severity: Varies Component: sec Text: bad state Explanation: Operation attempted while registry was in a state unable to perform that type of operation. Action: None required.
OSF DCE Problem Determination Guide 0x171220af sec_rgy_rep_cannot_rename_db Severity: Varies Component: sec Text: cannot rename database Explanation: The registry server was unable to rename the database files during conversion to the current database format. Action: The registry server must be run as root. Ensure adequate disk space exists and that the registry database directory is accessible.
Error Messages and Status Codes Explanation: ? Action: ? 0x17122d18 sec_rgy_rep_host_identity Severity: Fatal Component: sec / sec_s_rs_main Text: Replica cannot get local host identity\n%s Explanation: Cannot get local host principal’s context and identity Action: ? 0x171220c5 sec_rgy_rep_init_ekey_invalid Severity: Varies Component: sec Text: initialization encryption key not valid Explanation: Initialization encryption key is not valid. Action: Notify support personnel.
OSF DCE Problem Determination Guide Text: Replica is the master Explanation: Specified operation may only be performed at a non-master registry replica site. Action: None required. 0x171220cb sec_rgy_rep_master_bad_sw_vers Severity: Varies Component: sec Text: master is running a bad software version Explanation: Master registry is running a version of software that is not compatible with the replica registry servers. Action: Ensure that the correct version of sw is being used.
Error Messages and Status Codes Action: ? 0x171220b3 sec_rgy_rep_not_from_master Severity: Varies Component: sec Text: not from master Explanation: Internal error, should not happen. Action: Notify support personnel. 0x171220b2 sec_rgy_rep_not_master Severity: Varies Component: sec Text: Replica is not the master Explanation: Specified operation may only be performed by the master registry server. Action: None required.
OSF DCE Problem Determination Guide Explanation: This code won’t be executed; we may as well take it out :-) or replaced with same fatal message Action: ? 0x17122e7b sec_rgy_rep_set_state Severity: Fatal Component: sec / sec_s_rs_rep Text: Cannot set replica state\n%s Explanation: This code won’t be executed; we may as well take it out :-) or replaced with same fatal message Action: ? 0x17122e7d sec_rgy_rep_set_volatile_state Severity: Fatal Component: sec / sec_s_rs_rep Text: Cannot save volatile repli
Error Messages and Status Codes 0x171220bb sec_rgy_rep_update_seqno_low Severity: Varies Component: sec Text: slave received an old update from master Explanation: Registry replica received an update from a master registry that is older than updates already received by the replica. Either the replica is accepting the new master and should automatically reinitialize itself from this master, or it believes that the master has an obsolete database and it will shut down.
OSF DCE Problem Determination Guide Text: Cannot do database checkpoint\n%s Explanation: ? Action: ? 0x17122e81 sec_rgy_rsdb_checkpt_uninit Severity: Fatal Component: sec / sec_s_rs_rep Text: Error checkpointing an uninitialized database\n%s Explanation: When a slave database is re-initializing, in-memory data is cleared and recreated. Problem occurred when trying to do checkpoint on this database.
Error Messages and Status Codes Severity: Varies Component: sec Text: PGO/account is required and can’t be deleted Explanation: Attempted to delete a required PGO or account. Action: Do not attempt to delete this object. 0x17122d05 sec_rgy_startup_done Severity: Notice Component: sec / sec_s_rs_main Text: Startup completed Explanation: Security server initialization has been completed. Action: None required.
OSF DCE Problem Determination Guide 0x17122d02 sec_rgy_thr_join Severity: Fatal Component: sec / sec_s_rs_main Text: Cannot join with listener task Explanation: Cannot join pthread tasks Action: ? 0x17122d1c sec_rgy_thr_set_pool Severity: Fatal Component: sec / sec_s_rs_main Text: Cannot set default thread pool queue length\n%s Explanation: Prior to setting maximum number of rpc listener threads, a call to set rpc listener threads pool queue length failed, Action: ? 0x17122077 sec_rgy_unix_id_changed Se
Error Messages and Status Codes Text: Unable to get account by id Explanation: ? Action: Log a defect. 0x17122eb8 sec_rsdb_acct_end_list Severity: Fatal Component: sec / sec_s_rs_rsdb Text: unexpected end of member list Explanation: ? Action: Log a defect. 0x17122eb6 sec_rsdb_acct_noaliases Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Ran out of aliases Explanation: ? Action: Log a defect.
OSF DCE Problem Determination Guide Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Unable to construct item name Explanation: ? Action: Log a defect. 0x17122ed4 sec_rsdb_cant_get_group_creds Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Unable to obtain credentials for group Explanation: ? Action: Log a defect. 0x17122ec9 sec_rsdb_cant_get_item Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Unable to lookup item Explanation: ? Action: Log a defect.
Error Messages and Status Codes 0x17122edb sec_rsdb_cant_get_mgr_typuuid Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Could not get manager type uuid Explanation: ? Action: Log a defect. 0x17122ed5 sec_rsdb_cant_get_org_creds Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Unable to obtain credentials for org Explanation: ? Action: Log a defect.
OSF DCE Problem Determination Guide 0x17122ec5 sec_rsdb_cant_set_policy Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Unable to set policy Explanation: ? Action: Log a defect. 0x17122ec3 sec_rsdb_cant_set_properties Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Unable to set properties Explanation: ? Action: Log a defect. 0x17122ec4 sec_rsdb_cant_set_realm Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Unable to set realm Explanation: ? Action: Log a defect.
Error Messages and Status Codes 0x17122ea5 sec_rsdb_db_chkpt_err Severity: Error Component: sec / sec_s_rs_rsdb Text: Cannot checkpoint database Explanation: ? Action: ? 0x17122ed0 sec_rsdb_db_inconsistent Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Database inconsistent Explanation: ? Action: Log a defect. 0x17122ea9 sec_rsdb_dbstore_fail Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Database store failed. Explanation: ? Action: Log a defect.
OSF DCE Problem Determination Guide 0x17122ea2 sec_rsdb_ent_not_xlated Severity: Warning Component: sec / sec_s_rs_rsdb Text: Log entry not translated and so skipped Explanation: ? Action: ? 0x17122ed8 sec_rsdb_fetch_error Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Error occurred while fetching data Explanation: ? Action: Log a defect.
Error Messages and Status Codes 0x17122ea6 sec_rsdb_log_chkpt_err Severity: Error Component: sec / sec_s_rs_rsdb Text: Cannot checkpoint log file Explanation: ? Action: ? 0x17122ea4 sec_rsdb_logent_replay_err Severity: Warning Component: sec / sec_s_rs_rsdb Text: Error occurred replaying log entry and so skipped Explanation: ? Action: ? 0x17122ea0 sec_rsdb_log_file_open Severity: Warning Component: sec / sec_s_rs_rsdb Text: Log file is already open Explanation: ? Action: ? 0x17122ec2 sec_rsdb_no_open_
OSF DCE Problem Determination Guide 0x17122ea8 sec_rsdb_rep_state_not_saved Severity: Error Component: sec / sec_s_rs_rsdb Text: Cannot save replica state Explanation: ? Action: ? 0x17122eda sec_rsdb_unknown_aclmgr_type Severity: Fatal Component: sec / sec_s_rs_rsdb Text: Unknown ACL manager type Explanation: ? Action: Log a defect.
Error Messages and Status Codes Action: None required. 0x17122e02 sec_rs_log_file_closed Severity: Error Component: sec / sec_s_rs_log Text: Cannot write to closed log file Explanation: The log file was not open. Action: Internal error. Log a defect. 0x17122d27 sec_rs_login_bad_name Severity: Error Component: sec / sec_s_rs_login Text: Bad name . %s Explanation: ? Action: ? 0x17122d25 sec_rs_login_cant_refresh Severity: Warning Component: sec / sec_s_rs_login Text: Unable to refresh %s identity .
OSF DCE Problem Determination Guide Explanation: The thread will attempt to refresh to the login context using the call sec_login_refresh_identity() Action: ? 0x17122d23 sec_rs_login_refresh_wait Severity: Notice Component: sec / sec_s_rs_login Text: Context ( %s ) - wait %d seconds before refreshing Explanation: The thread will wait for the specified number of seconds before attempting to refresh the login context.
Error Messages and Status Codes Severity: Notice Component: sec / sec_s_rs_log Text: \tReplay: Module=[%s] Op=[%s] Seqno=[%s] Explanation: Logged during replay Action: None required. 0x17122e08 sec_rs_log_replay_err Severity: Error Component: sec / sec_s_rs_log Text: Error replaying log Explanation: ? Action: ? 0x17122e05 sec_rs_log_replay_succ Severity: Notice Component: sec / sec_s_rs_log Text: Successfully replayed the log file Explanation: Replayed the log file Action: None required.
OSF DCE Problem Determination Guide 0x17122d4c sec_rs_ns_bind_export Severity: Notice Component: sec / sec_s_rs_ns Text: Attempting to export bindings to %s Explanation: The security server is attempting to export the interfaces to the name space. Action: None required. 0x17122d4d sec_rs_ns_bind_export_succ Severity: Notice Component: sec / sec_s_rs_ns Text: Successfully exported bindings to %s Explanation: The bindings have been exported to name space. Action: None required.
Error Messages and Status Codes 0x17122d43 sec_rs_ns_grp_ent_create_succ Severity: Notice Component: sec / sec_s_rs_ns Text: Group (%s) entry created Explanation: Informational event Action: None required. 0x17122d44 sec_rs_ns_grp_mbr_add_fail Severity: Notice Component: sec / sec_s_rs_ns Text: Member (%s) not added to group (%s) Explanation: Informational event. Action: None required.
OSF DCE Problem Determination Guide Action: Log a defect 0x17122d41 sec_rs_ns_null_v1_group Severity: Error Component: sec / sec_s_rs_ns Text: rs_ns_sec_group_name_v1 is NULL. Explanation: This is an internal error. Action: Log a defect. 0x17122d46 sec_rs_ns_prof_elt_add_fail Severity: Notice Component: sec / sec_s_rs_ns Text: Profile element (%s) not added Explanation: The profile element was not added to cell-profile. Action: None required.
Error Messages and Status Codes Explanation: The secidmap to sec mapping could not be removed from cell-profile Action: None required. 0x17122d49 sec_rs_ns_prof_elt_rm_succ Severity: Notice Component: sec / sec_s_rs_ns Text: %s Profile element removed Explanation: The secidmap to sec mapping was removed from cell-profile Action: None required.
OSF DCE Problem Determination Guide Text: RPC interfaces registered. Explanation: Security server has successfully registered the server interfaces with the RPC runtime and the end point mapper Action: None required. 0x17122d83 sec_rs_rpc_if_unreg_succ Severity: Notice Component: sec / sec_s_rs_rpc Text: RPC interfaces unregistered. Explanation: Security server has unregistered the server interfaces from the RPC runtime and the end point mapper Action: None required.
Error Messages and Status Codes Action: ? 0x17122d86 sec_rs_rpc_save_bind_err Severity: Error Component: sec / sec_s_rs_rpc Text: Unable to save server’s bindings Explanation: ? Action: ? 0x17122d84 sec_rs_rpc_use_protseq_err Severity: Error Component: sec / sec_s_rs_rpc Text: Unable to listen on any protocol sequence Explanation: ? Action: ? 0x17122da1 sec_rs_thr_create_fail Severity: Error Component: sec / sec_s_rs_thr Text: Failed to created thread %s Explanation: The specified thread could not be
OSF DCE Problem Determination Guide Severity: Notice Component: sec / sec_s_rs_thr Text: "%s" thread started Explanation: The specified thread has been started. This message is logged by a thread as soon as it is created and starts running. Action: None required.
Error Messages and Status Codes Explanation: Client failed challenge issued by server in RPC DG callback. Could be caused by a bug in DCE, trouble with the network, or possibly a failed security attack. Action: Ensure network is functioning properly. Ensure no obvious network attacks are in progress. Notify support personnel. 0x17122d09 sec_secd_cl_bad_arg Severity: Error Component: sec / sec_s_rs_main Text: Bad argument for %s option Explanation: The argument for the specified option is not correct.
OSF DCE Problem Determination Guide 0x17122d07 sec_secd_cl_usage Severity: Notice Component: sec / sec_s_rs_main Text: Usage: secd [-bootstrap] [-restore_master] [-verbose] [-w serviceability ] \n\t\t [locksmith principal_name [-lockpw] [-remote]] Explanation: secd started with incorrect arguments Action: Run secd with correct options and arguments. Consult the secd nmanual page for details.
Error Messages and Status Codes Text: Successfully bound to registry site %s Explanation: ? Action: None required. 0x17122f23 sec_site_cell_bind_start Severity: Notice Component: sec / sec_s_rgybind Text: Attempting to bind to an arbitrary registry site in cell %s Explanation: ? Action: None required. 0x17122f28 sec_site_lookup_file Severity: Notice Component: sec / sec_s_rgybind Text: Retrieving RPC string binding handles for %s from file %s Explanation: ? Action: None required.
OSF DCE Problem Determination Guide Severity: Notice Component: sec / sec_s_rgybind Text: Failed to rebind to an alternate registry site\n%s Explanation: ? Action: None required. 0x17122f25 sec_site_rebind_start Severity: Notice Component: sec / sec_s_rgybind Text: Attempting to rebind to an alternate registry site Explanation: ? Action: None required.
Error Messages and Status Codes Action: Check available system swap space and increase if necessary. 0x17122004 sec_s_none_registered Severity: Varies Component: sec Text: no identity set yet Explanation: Application programming error. The server has not yet registered its identity with the security runtime. Action: Application should register its identity with rpc_server_register_auth_info() before this point.
OSF DCE Problem Determination Guide 0x1712200f sec_s_v1_1_no_support Severity: Varies Component: sec Text: security service does not support version 1.1 security features Explanation: Client attempted to use a DCE1.1 security feature that the server doesn’t support. Action: Don’t try to use a 1.1 feature if your security servers don’t support them. 0x17122cd1 sec_svc_cant_get_msg Severity: Varies Component: sec Text: Unable to get message Explanation: Serviceability component returns a error.
Error Messages and Status Codes Explanation: An attempt to truncate the file using the call ftruncate() failed. Action: ? 0x17122f63 sec_sys_file_lseek_fail Severity: Varies Component: sec Text: File seek failed ( file descriptor = %d ) Explanation: ? Action: None required. 0x17122f64 sec_sys_file_open_fail Severity: Varies Component: sec Text: Failed to open file %s Explanation: ? Action: None required.
OSF DCE Problem Determination Guide Text: %s thread cancelled. Execution terminated. Explanation: The thread terminated execution because it received a thread cancel exception. Action: ? 0x17122f43 sec_thr_exit_exc Severity: Varies Component: sec Text: Thread exiting due to an exception. Explanation: The thread terminated execution because it received a exception.
Error Messages and Status Codes Action: Check the system for reports of I/O failures, take the appropriate corrective action, and restart the server. 0x173ca00d svc_s_acl_write_error Severity: Varies Component: svc Text: ACL file could not be written Explanation: The file that stores the serviceability ACL cannot be written. The global variable errno may contain more information. Action: Check the system for reports of I/O failures, take the appropriate corrective action, and restart the server.
OSF DCE Problem Determination Guide Action: Correct input and try again. 0x173ca003 svc_s_no_filter Severity: Varies Component: svc Text: No filter defined Explanation: An attempt was made to send data to the filter-control handle for a component that does not have a filter registered. Action: Verify the component name or do not invoke the operation.
Error Messages and Status Codes Severity: Varies Component: svc Text: Unknown component Explanation: An attempt was made to find the service handle for a component and could not do so. Action: Verify that the component name is known or correct the incorrect reference in the program. 0x1771b008 tcl_s_basic_break_outside_of_loop Severity: Unknown Component: tcl / tcl_s_general Text: invoked "break" outside of a loop Explanation: The break command is used outside of a loop.
OSF DCE Problem Determination Guide Severity: Unknown Component: tcl / tcl_s_general Text: invalid command name: "%s" Explanation: Tcl detected an invalid command name. Action: Check the spelling of a command. If the spelling is correct, make sure you are using the valid Tcl commands or application commands.
Error Messages and Status Codes Text: high guard failed at %lx, %s %d\n Explanation: Tcl detected that the internal memory allocation request is invalid. Action: Write down the message displayed, if possible. Before this message appears, Tcl will dump memory information onto a standard error output ( stderr), so save the memory dump information with this error message. Then report to a vendor.
OSF DCE Problem Determination Guide 0x1771b023 tcl_s_ckalloc_unable_to_alloc Severity: Unknown Component: tcl / tcl_s_general Text: unable to alloc %d bytes Explanation: The malloc function failed. There is no memory left for a new allocation. Action: Stop any unnecessary process and try again, or add more memory. 0x1771b019 tcl_s_ckalloc_unable_to_alloc_bytes_line Severity: Unknown Component: tcl / tcl_s_fatal Text: unable to alloc %d bytes, %s line %d Explanation: The malloc function failed.
Error Messages and Status Codes Explanation: Tcl could not save the catch command execution result into a user specified variable. Action: Check your Tcl code for spelling of the variable. Make sure the variable exists. 0x1771b034 tcl_s_cmdah_could_not_set_loop_var Severity: Unknown Component: tcl / tcl_s_general Text: couldn’t set loop variable Explanation: Tcl could not set the foreach command loop variable. Action: Check your Tcl code for spelling of the variable. Make sure it exists.
OSF DCE Problem Determination Guide 0x1771b06a tcl_s_cmdil_com_cmd_ret_non_numeric Severity: Unknown Component: tcl / tcl_s_general Text: comparison command returned non-numeric result Explanation: The lsort command detected that the user-defined comparison command failed. Action: Check your Tcl command and correct the comparison command accordingly.
Error Messages and Status Codes Text: "%s" isn’t a procedure Explanation: The info command detected that the number of arguments specified is not correct. Action: Check your Tcl command and specify the correct procedure name. 0x1771b051 tcl_s_cmdil_no_tcl_library Severity: Unknown Component: tcl / tcl_s_general Text: there is no Tcl library at this installation Explanation: The info command detected that there is no Tcl library installed currently. Action: Install Tcl correctly, and try again.
OSF DCE Problem Determination Guide Action: Check your Tcl command and use the correct conversion character. 0x1771b06f tcl_s_cmdmz_could_not_set_var Severity: Unknown Component: tcl / tcl_s_general Text: couldn’t set variable "%s" Explanation: Tcl detected that an error occurred while storing a string into a userspecified variable. Action: Check your Tcl command and make sure you specified an existing variable.
Error Messages and Status Codes 0x1771b08c tcl_s_cmdmz_extra_switch_pat_no_body Severity: Unknown Component: tcl / tcl_s_general Text: extra switch pattern with no body Explanation: The switch command detected that the number of switch pattern exceeds the number of instructions. Action: Check your Tcl command and specify the missing instructions corresponding to the switch pattern, or delete the switch pattern.
OSF DCE Problem Determination Guide 0x1771b079 tcl_s_cmdmz_too_many_flds_to_scan Severity: Unknown Component: tcl / tcl_s_general Text: too many fields to scan Explanation: The scan command detected that too many fields are specified. Action: Check your Tcl command and reduce the number of fields. 0x1771b06e tcl_s_cmdmz_too_many_substr_var Severity: Unknown Component: tcl / tcl_s_general Text: too many substring variables Explanation: The regexp command detected too many substring variables.
Error Messages and Status Codes 0x1771b09f tcl_s_expr_colon_without_question Severity: Unknown Component: tcl / tcl_s_general Text: can’t have : operator without ? first Explanation: The expr command detected that a colon operator is used without a question mark. Action: Check your Tcl code and add the question mark.
OSF DCE Problem Determination Guide Explanation: The expr command detected that the supplied floating-point value is too large to represent. Action: Check your Tcl code and correct the floating-point value. 0x1771b0a9 tcl_s_expr_float_val_too_small Severity: Unknown Component: tcl / tcl_s_general Text: floating-point value too small to represent Explanation: The expr command detected that the supplied floating-point value is too small to represent.
Error Messages and Status Codes 0x1771b09b tcl_s_expr_poor_flat_val_form Severity: Unknown Component: tcl / tcl_s_general Text: poorly-formed floating-point value Explanation: The expr command detected that a specified floating-point format is not valid. Action: Check your Tcl code and correct the floating-point format. Tcl accepts ANSI C forms, which are something like 2.1, 7.91e+16, 6E4, or 3.
OSF DCE Problem Determination Guide Text: unmatched parentheses in expression "%s" Explanation: The expr command detected an unmatched parenthesis in the user-supplied expression. Action: Check your Tcl code and correct the unmatched parenthesis. 0x1771b0ae tcl_s_get_exp_boolean_but Severity: Unknown Component: tcl / tcl_s_general Text: expected boolean value but got "%s" Explanation: Tcl detected an invalid string for a Boolean value. Action: Check your Tcl code and correct the input for a Boolean value.
Error Messages and Status Codes 0x1771b0b5 tcl_s_glob_no_files_match_single Severity: Unknown Component: tcl / tcl_s_general Text: no files matched glob pattern " Explanation: The glob command detected that the pattern specified by a user could not match any filename. Action: Check your Tcl command and make sure you spelled glob pattern correctly.
OSF DCE Problem Determination Guide Explanation: Tcl detected that a nonexisting table is used for the Tcl_CreateHashEntry function. Action: Check your Tcl command, and make sure you do not attempt to use a nonexisting hash table. 0x1771b0bc tcl_s_hash_bogus_find Severity: Unknown Component: tcl / tcl_s_fatal Text: called Tcl_FindHashEntry on deleted table Explanation: Tcl detected that a nonexisting table is used for the Tcl_FindHashEntry function.
Error Messages and Status Codes Action: Check your Tcl command and specify the correct event for a history command. 0x1771b0cf tcl_s_hist_evt_word_sele_non_existent Severity: Unknown Component: tcl / tcl_s_general Text: word selector "%s" specified non-existent words Explanation: The history command detected that the word selector specified nonexistent words. Action: Check your Tcl command and specify the correct word selector for a history command.
OSF DCE Problem Determination Guide Explanation: Tcl detected that a linked variable specified is read-only. Action: Check your Tcl command and make sure you do not try to write a read-only linked variable. 0x1771b0e8 tcl_s_link_linked_var_unreadable Severity: Unknown Component: tcl / tcl_s_fatal Text: internal error: linked variable couldn’t be read Explanation: Tcl detected that a linked variable could not be read. This is an internal error and should not happen.
Error Messages and Status Codes Explanation: An application-specified initialization for Tcl failed. Action: Check your Tcl command and make sure your initialization procedure is correct. 0x1771b0d8 tcl_s_parse_extra_char_brace Severity: Unknown Component: tcl / tcl_s_general Text: extra characters after close-brace Explanation: Tcl detected, in a braces-quoted string parsing, that extra characters exists. Action: Check your Tcl command and delete the extra characters.
OSF DCE Problem Determination Guide 0x1771b0d6 tcl_s_parse_missing_close_bracket Severity: Unknown Component: tcl / tcl_s_general Text: missing close-bracket Explanation: Tcl detected, in a bracket-quoted string parsing, that a closing bracket is missing. Action: Check your Tcl command and make sure you are closing a bracket-quoted string.
Error Messages and Status Codes Text: procedure "%s" has argument with no name Explanation: The proc command detected an argument without the name given. Action: Check your Tcl command and give all arguments names. 0x1771b0e1 tcl_s_proc_no_val_given_to_par Severity: Unknown Component: tcl / tcl_s_general Text: no value given for parameter "%s" to "%s" Explanation: Tcl detected that there was no value specified for a parameter to a userdefined procedure.
OSF DCE Problem Determination Guide Action: Check errorInfo global variable information and report the problem to the vendor. 0x1771b17e tcl_s_tclregexp_follows_nothing Severity: Unknown Component: tcl / tcl_s_general Text: ?+* follows nothing Explanation: While compiling a regular expression, Tcl detected that ?, + , o r * didn’t follow anything meaningful. Action: Check your regular expression given to Tcl and correct the problem.
Error Messages and Status Codes Explanation: While compiling a regular expression, Tcl detected that the range given with brackets was wrong. Action: Check your regular expression given to Tcl. Correct the invalid range within the brackets. 0x1771b178 tcl_s_tclregexp_junk_end Severity: Unknown Component: tcl / tcl_s_general Text: junk on end Explanation: While compiling a regular expression, Tcl detected that some unrecognized string followed the regular expression.
OSF DCE Problem Determination Guide Text: NULL parameter Explanation: While matching a regular expression, Tcl detected that either the regular expression or the string matching against the regular expression was NULL. Action: Check your regular expression given to Tcl and correct the problem.
Error Messages and Status Codes Text: trailing backslash Explanation: While compiling a regular expression, Tcl detected that a backslash is the last character for the regular expression given. Action: Check your regular expression given to Tcl and correct the problem. 0x1771b177 tcl_s_tclregexp_unmatch_br Severity: Unknown Component: tcl / tcl_s_general Text: unmatched () Explanation: While compiling a regular expression, Tcl detected the incomplete parentheses.
OSF DCE Problem Determination Guide Text: internal error in Tcl_SplitList Explanation: Tcl detected an invalid list structure. Tcl_SplitList failed internally. Action: Check errorInfo global variable information and figure out where the problem took place, then correct it. 0x1771b16a tcl_s_tclutil_list_ele_in_braces Severity: Unknown Component: tcl / tcl_s_general Text: list element in braces followed by "%.*s" instead of space Explanation: Tcl detected an invalid list structure.
Error Messages and Status Codes Explanation: Tcl detected an invalid list structure. The list was not terminated by a closing brace. Action: Check your Tcl command and modify the list structure. 0x1771b16d tcl_s_tclutil_unmatch_open_quote Severity: Unknown Component: tcl / tcl_s_general Text: unmatched open quote in list Explanation: Tcl detected an invalid list structure. The list was not terminated by a closing quote. Action: Check your Tcl command and modify the list structure.
OSF DCE Problem Determination Guide Severity: Unknown Component: tcl / tcl_s_general Text: "%s" isn’t an array Explanation: The array command detected that the argument specified was not an array. Action: Check the Tcl code and specify an array to the array command. 0x1771b19e tcl_s_tclvar_need_array Severity: Unknown Component: tcl / tcl_s_general Text: variable isn’t array Explanation: Tcl detected that the variable specified by the user was not an array.
Error Messages and Status Codes 0x1771b0ee tcl_s_test_bogus_interpreter Severity: Unknown Component: tcl / tcl_s_general Text: bogus interpreter argument! Explanation: Tcl detected that the interpreter passed to Tcl_CallWhenDeleted was not valid. Action: Check your Tcl command and make sure to pass the valid interpreter to the Tcl_CallWhenDeleted call.
OSF DCE Problem Determination Guide 0x1771b112 tcl_s_unixaz_cannot_read_output Severity: Unknown Component: tcl / tcl_s_general Text: can’t read output from command: standard output was redirected Explanation: The open command detected that standard output was redirected. Action: Check your Tcl command and correct the wrong redirection.
Error Messages and Status Codes Explanation: The Tcl command failed, and the child process was suspended. Action: Check other Tcl error messages within the errorInfo global variable, then correct the failed Tcl command. 0x1771b11e tcl_s_unixaz_cwd_name_too_long Severity: Unknown Component: tcl / tcl_s_general Text: working directory name is too long Explanation: The pwd command noticed the supplied directory name was too long to process. Action: Check your Tcl command and make the directory name shorter.
OSF DCE Problem Determination Guide 0x1771b10f tcl_s_unixaz_error_reading Severity: Unknown Component: tcl / tcl_s_fatal Text: error reading "%s": %s Explanation: The gets command could not read the specified file. Action: Write down your Tcl command and the error message, then report to the vendor. 0x1771b12b tcl_s_unixaz_error_read_stderr Severity: Unknown Component: tcl / tcl_s_fatal Text: error reading stderr output file: %s Explanation: The read system call failed internally.
Error Messages and Status Codes Action: Check your Tcl command and correct the wrong access mode. The valid access modes are r, w, and a. 0x1771b117 tcl_s_unixaz_invalid_access_mode Severity: Unknown Component: tcl / tcl_s_general Text: invalid access mode "%s": must be RDONLY, WRONLY, RDWR, APPEND, CREAT, EXCL, NOCTTY, NONBLOCK, or TRUNC Explanation: The open command detected that the access mode specified was wrong. Action: Check your Tcl command and correct the wrong access mode as specified.
OSF DCE Problem Determination Guide Action: Check other Tcl error messages within the errorInfo global variable, then guess the cause of failure. If you cannot make any guess, report to the vendor. 0x1771b12e tcl_s_unixstr_unknown_signal Severity: Unknown Component: tcl / tcl_s_fatal Text: unknown signal Explanation: The Tcl command execution generated a signal, but Tcl could not recognize the signal.
Error Messages and Status Codes Explanation: Tcl could not create a specified pipe. Action: The pipe system call failed internally. The reason why the pipe system call failed is also displayed. After you examine errorInfo global variable information and cannot make sense, report the error to the vendor.
OSF DCE Problem Determination Guide Severity: Unknown Component: tcl / tcl_s_fatal Text: couldn’t remove error file for command: %s Explanation: Tcl could not remove file with a command that uses pipeline. Action: The unlink system call failed internally. The reason why the unlink system call failed is also displayed. After you examine errorInfo global variable information and cannot make sense, report the error to the vendor.
Error Messages and Status Codes displayed. After you examine errorInfo global variable information and cannot make sense, report the error to the vendor. 0x1771b154 tcl_s_unixutil_err_close_file Severity: Unknown Component: tcl / tcl_s_general Text: error closing file "%s": "%s" Explanation: Tcl detected an error when it tried to close a specified file. Action: Check other Tcl error messages within the errorInfo global variable. The reason why the close operation failed is also displayed.
OSF DCE Problem Determination Guide Explanation: Tcl detected that a file ID passed to the Tcl_GetOpenFile routine was not open for writing. Action: Check errorInfo global variable information and figure out where the problem took place, then correct it. 0x1771b161 tcl_s_unixutil_forked_proc_useless Severity: Unknown Component: tcl / tcl_s_fatal Text: forked process couldn’t set up input/output\n Explanation: Tcl could not set up a pipe correctly. Action: The dup2 system call failed internally.
Error Messages and Status Codes Explanation: Tcl could not get the status of a specified file. Action: Check other Tcl error messages within the errorInfo global variable. The reason why the stat operation failed is also displayed. Based on the information you got, take an appropriate action. 0x1771b164 tcl_s_unixutil_not_find_to_exec Severity: Unknown Component: tcl / tcl_s_fatal Text: couldn’t find "%.300s" to execute\n Explanation: Tcl could not execute a command specified.
OSF DCE Problem Determination Guide 0x17083076 tty_err_input_too_long Severity: Varies Component: sad Text: Input data length exceeds allocated buffer size (Registry Editor/TTY Interface) Explanation: ? Action: None required 0x17083071 tty_incompatible_options Severity: Varies Component: sad Text: Incompatible options (Registry Editor/TTY Interface) Explanation: ? Action: None required 0x17083077 tty_input_out_of_range Severity: Varies Component: sad Text: Input out of range (Registry Editor/TTY Inter
Error Messages and Status Codes 0x1708307b tty_PAD1 Severity: Varies Component: sad Text: tty_PAD1 Explanation: ? Action: None required 0x1708307c tty_PAD2 Severity: Varies Component: sad Text: tty_PAD2 Explanation: ? Action: None required 0x1708307d tty_PAD3 Severity: Varies Component: sad Text: tty_PAD3 Explanation: ? Action: None required 0x1708307e tty_PAD4 Severity: Varies Component: sad Text: tty_PAD4 Explanation: ? Action: None required 0x1708307f tty_PAD5 Severity: Varies Component: sad Te
OSF DCE Problem Determination Guide 0x17083081 tty_PAD7 Severity: Varies Component: sad Text: tty_PAD7 Explanation: ? Action: None required 0x17083082 tty_PAD8 Severity: Varies Component: sad Text: tty_PAD8 Explanation: ? Action: None required 0x17083083 tty_PAD9 Severity: Varies Component: sad Text: tty_PAD9 Explanation: ? Action: None required 0x17083084 tty_PADa Severity: Varies Component: sad Text: tty_PADa Explanation: ? Action: None required 0x17083085 tty_PADb Severity: Varies Component: sad
Error Messages and Status Codes 0x17083087 tty_PADd Severity: Varies Component: sad Text: tty_PADd Explanation: ? Action: None required 0x17083088 tty_PADe Severity: Varies Component: sad Text: tty_PADe Explanation: ? Action: None required 0x17083089 tty_PADf Severity: Varies Component: sad Text: tty_PADf Explanation: ? Action: None required 0x1708307a tty_pwd_gen_req Severity: Varies Component: sad Text: Password must be generated by password management server (Registry Editor/TTY Interface) Explan
OSF DCE Problem Determination Guide Action: Report the error to your vendor. 0x16c9a0c6 twr_s_unknown_tower Severity: Varies Component: rpc Text: Unknown tower Explanation: An internal error occurred. Action: Report the error to your vendor. 0x1460101f utils_s_802_addr_format Severity: Varies Component: lib Text: Bad format in IEEE 802 address file Explanation: In dce_get_802_addr() the file containing the IEEE 802 address was found to contain a bad format.
Error Messages and Status Codes 0x17e43001 uuidgen_st_failure Severity: Varies Component: uid Text: The func call failed with the following error:\nerror text\n Explanation: The specified DCE function failed. Action: Take the corrective action as indicated for the specified error text. 0x16c9a088 uuid_s_bad_version Severity: Varies Component: rpc Text: Bad UUID version Explanation: An application passed a UUID as input to the RPC runtime but the UUID was unrecognized. Action: Fix the application.
OSF DCE Problem Determination Guide Explanation: The contents of the string passed to uuid_from_string was not in the valid UUID string format. Action: Supply a correctly formatted UUID. 0x16c9a08b uuid_s_no_address Severity: Varies Component: rpc Text: No IEEE 802 hardware address Explanation: The RPC runtime’s UUID generator was unable to get the local system’s IEEE 802 address. Action: Make sure the underlying network transport service is working.
Appendix A. Message Numbers and Symbolic Names The table in this appendix provides a cross-reference between the number of a message and its symbolic name. If you only have the message number to go by, look up that number in the following listing to find the symbolic name. You can then look at the table in Appendix B that contains a cross-reference of message texts and symbolic names to find detailed information about the message.
OSF DCE Problem Determination Guide 0x10323013 0x10323014 0x10323015 0x10323016 0x10323017 0x10323018 0x10323019 0x1032301a 0x1032301b 0x1032301c 0x1032301d 0x1032301e 0x1032301f 0x10323020 0x10323021 0x10323022 0x10323023 0x10323024 0x10323025 0x10323026 0x10323027 0x10323028 0x10323029 0x1032302a 0x1032302b 0x1032302c 0x1032302d 0x1032302e 0x1032302f 0x10323030 0x10323031 0x10323032 0x10323033 0x10323034 0x10323035 0x10323036 0x10323037 0x10323038 0x10323039 0x1032303a 0x1032303b 0x1032303c 0x1032303d 0x1
Message Numbers and Symbolic Names 0x10323042 0x10323043 0x10323044 0x10323045 0x10323046 0x10323047 0x10323048 0x10323049 0x1032304a 0x1032304b 0x1032304c 0x1032304d 0x1032304e 0x1032304f 0x10323050 0x10323051 0x10323052 0x10323053 0x10323054 0x10323055 0x10323056 0x10323057 0x10323058 0x10323059 0x1032305a 0x1032305b 0x1032305c 0x1032305d 0x1032305e 0x1032305f 0x10323060 0x10323061 0x10323062 0x10323063 0x10323064 0x10323065 0x10323066 0x10323067 0x10323068 0x10323069 0x1032306a 0x1032306b 0x1032306c 0x10
OSF DCE Problem Determination Guide 0x10323071 0x10323072 0x10323073 0x10323074 0x10323075 0x10323076 0x10323077 0x10323078 0x10323079 0x1032307a 0x1032307b 0x1032307c 0x1032307d 0x1032307e 0x1032307f 0x10323080 0x10323081 0x10323082 0x10323083 0x10d0a001 0x10d0a003 0x10d0a064 0x10d0a065 0x10d0a066 0x10d0a067 0x10d0a068 0x10d0a069 0x10d0a06a 0x10d0a06b 0x10d0a06c 0x10d0a06d 0x10d0a06e 0x10d0a06f 0x10d0a070 0x10d0a071 0x10d0a072 0x10d0a073 0x10d0a074 0x10d0a075 0x10d0a076 0x10d0a077 0x10d0a078 0x10d0a079 0x1
Message Numbers and Symbolic Names 0x10d0a07e 0x10d0a07f 0x10d0a080 0x10d0a081 0x10d0a082 0x10d0a083 0x10d0a084 0x10d0a085 0x10d0a086 0x10d0a087 0x10d0a088 0x10d0a089 0x10d0a08a 0x10d0a08b 0x10d0a12c 0x10d0a12e 0x10d0a12f 0x10d0a130 0x10d0a131 0x10d0a132 0x10d0a133 0x10d0a134 0x10d0a135 0x10d0a136 0x10d0a137 0x10d0a138 0x10d0a139 0x10d0a13a 0x10d0a13b 0x10d0a13c 0x10d0a13d 0x10d0a13e 0x10d0a13f 0x10d0a140 0x10d0a141 0x10d0a142 0x10d0a143 0x10d0a144 0x10d0a145 0x10d0a146 0x10d0a147 0x10d0a148 0x10d0a149 0x10
OSF DCE Problem Determination Guide 0x10d0a14e 0x10d0a14f 0x10d0a154 0x10d0a155 0x10d0a156 0x10d0a157 0x10d0a158 0x10d0a159 0x10d0a15b 0x10d0a15c 0x10d0a1f4 0x10d0a1f5 0x10d0a1f6 0x10d0a1f7 0x10d0a1f8 0x10d0a1fa 0x10d0a1fb 0x10d0a1fc 0x10d0a1fd 0x10d0a2bd 0x10d0a2be 0x10d0a2bf 0x10d0a2c0 0x10d0a2c1 0x10d0a2c2 0x10d0a2c3 0x10d0a2c4 0x10d0a2c5 0x10d0a2c6 0x10d0a2c7 0x10d0a2c8 0x10d0a2c9 0x10d0a2ca 0x10d0a2cb 0x10d0a2cc 0x10d0a2cd 0x10d0a2ce 0x10d0a2cf 0x10d0a3e9 0x10d0a3ea 0x10d0a3eb 0x10d0a3ec 0x10d0a3ed 0x1
Message Numbers and Symbolic Names 0x10d0a3f3 0x10d0a3f4 0x10d0a3f5 0x10d0a3f6 0x10d0a3f7 0x10d0a3f8 0x10d0a3f9 0x10d0a3fa 0x10d0a3fc 0x10d0a3fd 0x10d0a3fe 0x10d0a3ff 0x10d0a400 0x10d0a401 0x10d0a402 0x10d0a403 0x10d0a404 0x10d0a405 0x10d0a406 0x10d0a408 0x10d0a409 0x10d0a40a 0x10d0a40b 0x10d0a44d 0x10d0a450 0x10d0a451 0x10d0a452 0x10d0a455 0x10d0a456 0x10d0a457 0x10d0a458 0x10d0a459 0x10d0a45a 0x10d0a45b 0x10d0a45c 0x10d0a45d 0x10d0a45e 0x10d0a45f 0x10d0a460 0x10d0a461 0x10d0a462 0x10d0a463 0x10d0a7ce 0x10
OSF DCE Problem Determination Guide 0x10d0a89d 0x10d0a89f 0x10d0a96c 0x10d0a96f 0x10d0a972 0x10d0a9c4 0x10d0a9c5 0x10d0a9c6 0x10d0a9c7 0x10d0a9c8 0x10d0a9c9 0x10d0a9ca 0x10d0a9cb 0x10d0a9cc 0x10d0a9cd 0x10d0a9cf 0x10d0aa28 0x10d0aa29 0x10d0aa2a 0x10d0aa2b 0x10d0aa2c 0x10d0aa2d 0x10d0aa2e 0x10d0aa2f 0x10d0aa30 0x10d0aa31 0x10d0aa32 0x10d0aa33 0x10d0aa35 0x10d0aa36 0x10d0aa37 0x10d0aa38 0x10d0aa39 0x10d0aa3a 0x10d0aa3b 0x10d0aa3c 0x10d0aa3d 0x10d0aa3e 0x10d0aa3f 0x10d0aa40 0x10d0aa41 0x10d0aa42 0x10d0aa43 0x1
Message Numbers and Symbolic Names 0x10d0aa49 0x10d0aa4a 0x10d0aa4b 0x10d0aa4c 0x10d0aa4d 0x10d0aa4e 0x10d0aa4f 0x10d0aa50 0x10d0aa51 0x10d0aa52 0x10d0aa53 0x10d0aa54 0x10d0aa55 0x10d0aa56 0x10d0aa57 0x10d0aa58 0x10d0aa59 0x10d0aa5a 0x10d0aa5b 0x10d0aa5c 0x10d0aa5d 0x10d0aa5e 0x10d0aa5f 0x10d0aa60 0x10d0aa78 0x10d0aa79 0x10d0aa7a 0x10d0aa7b 0x10d0aa7c 0x10d0aa7d 0x10d0aa7e 0x10d0aa7f 0x10d0aa80 0x10d0aa81 0x10d0aa82 0x10d0aa83 0x10d0aa84 0x10d0aa85 0x10d0aa86 0x10d0aa87 0x10d0aa88 0x10d0aa89 0x10d0aa8a 0x10
OSF DCE Problem Determination Guide 0x10d0aa8f 0x10d0aa90 0x10d0aa91 0x10d0aa92 0x10d0aa93 0x10d0aaae 0x10d0ab54 0x10d0ab55 0x10d0ab56 0x10d0ab57 0x10d0ab58 0x10d0ab59 0x10d0ab5a 0x10d0ab5b 0x10d0ab5c 0x10d0ab5d 0x10d0ab5e 0x10d0ab5f 0x10d0ab60 0x10d0ab61 0x10d0ab62 0x10d0ab63 0x10d0ab64 0x10d0ab65 0x10d0ab66 0x10d0ab67 0x10d0ab68 0x10d0ab69 0x10d0ab6a 0x10d0ab6b 0x10d0ab6c 0x10d0ab6d 0x10d0ab6e 0x10d0ab6f 0x10d0ab70 0x10d0ab71 0x10d0ab72 0x10d0ab73 0x10d0ab74 0x10d0ab75 0x10d0ab76 0x10d0ab77 0x10d0ab78 0x1
Message Numbers and Symbolic Names 0x10d0ab7d 0x10d0ab7e 0x10d0ab7f 0x10d0ab80 0x10d0ab81 0x10d0ab82 0x10d0ab83 0x10d0ab84 0x10d0ab85 0x10d0ab86 0x10d0ab87 0x10d0ab88 0x10d0ab89 0x10d0ab8a 0x10d0ab8b 0x10d0ab8c 0x10d0ab8d 0x10d0ab8e 0x10d0ab8f 0x10d0ab90 0x10d0ab91 0x10d0ab92 0x10d0ab93 0x10d0ab94 0x10d0ab95 0x10d0ab96 0x10d0ab97 0x10d0ab98 0x10d0ab99 0x10d0ab9a 0x10d0ab9b 0x10d0ab9c 0x10d0ab9d 0x10d0ab9e 0x10d0ab9f 0x10d0aba0 0x10d0aba1 0x10d0aba2 0x10d0aba3 0x10d0aba4 0x10d0aba5 0x10d0aca4 0x10d0aca5 0x10
OSF DCE Problem Determination Guide 0x10d0aece 0x10d0aecf 0x10d0aed0 0x10d0aed2 0x10d0aed3 0x10d0aed4 0x10d0aed5 0x10d0aed6 0x10d0aed7 0x10d0aed8 0x10d0aed9 0x10d0aeda 0x10d0aef1 0x10d0aef2 0x10d0aef3 0x10d0aef4 0x10d0aef8 0x10d0af1c 0x10d0af1d 0x10d0af1e 0x10d0af1f 0x10d0af20 0x10d0af21 0x10d0af23 0x10d0af24 0x10d0af2e 0x10d0af31 0x10d0af32 0x10d0af33 0x10d0afff 0x10f61003 0x10f61004 0x10f61005 0x10f61006 0x10f61007 0x10f61009 0x10f6100a 0x10f6100b 0x10f6100c 0x10f6100d 0x10f6100e 0x1131f002 0x1131f003 0x1
Message Numbers and Symbolic Names 0x1131f008 0x1131f009 0x1131f00a 0x1131f00b 0x1131f00c 0x1131f00d 0x1131f00e 0x1131f00f 0x1131f010 0x1131f011 0x1131f012 0x1131f013 0x1131f014 0x1131f015 0x1131f016 0x1131f017 0x1131f018 0x1131f019 0x1131f01a 0x1131f01b 0x1131f01c 0x1131f01d 0x1131f01e 0x1131f020 0x1131f021 0x1131f022 0x1131f028 0x1131f029 0x1131f02a 0x1131f02b 0x1131f030 0x1131f031 0x1131f032 0x1131f033 0x1131f034 0x1131f035 0x1131f036 0x1131f037 0x1131f038 0x1131f039 0x1131f03a 0x1131f03d 0x1131f03e 0x11
OSF DCE Problem Determination Guide 0x1131f043 0x1131f044 0x1131f045 0x1131f047 0x1131f048 0x1131f049 0x1131f04a 0x1131f04b 0x1131f074 0x1131f075 0x1131f076 0x1131f077 0x1131f078 0x1131f079 0x1131f07a 0x1131f07b 0x1131f07c 0x1131f07d 0x1131f07e 0x1131f07f 0x1131f080 0x1131f081 0x1131f082 0x1131f083 0x1131f084 0x1131f0b0 0x1131f0b1 0x1131f0b2 0x1131f0b3 0x1131f0b4 0x1131f0b5 0x1131f0b6 0x1131f0b7 0x1131f0b8 0x1131f0b9 0x1131f0ba 0x1131f0bb 0x1131f0cf 0x1131f0d0 0x1131f0e6 0x1131f0e7 0x1131f0e8 0x1131f0eb 0x1
Message Numbers and Symbolic Names 0x1131f0f9 0x1131f0fa 0x1131f125 0x1131f126 0x1131f127 0x1131f128 0x1131f129 0x1131f12f 0x1131f165 0x1131f166 0x1131f167 0x1131f202 0x1131f203 0x1131f204 0x1131f205 0x1131f206 0x1131f207 0x1131f208 0x1131f209 0x1131f20a 0x1131f20b 0x1131f20c 0x1131f20d 0x1131f20e 0x1131f20f 0x1131f210 0x1131f211 0x1131f212 0x1131f213 0x1131f214 0x1131f215 0x1131f216 0x1131f217 0x1131f218 0x1131f219 0x1131f21a 0x1131f21b 0x1131f21c 0x1131f21d 0x1131f21e 0x1131f21f 0x1131f220 0x1131f221 0x11
OSF DCE Problem Determination Guide 0x1131f232 0x1131f233 0x1131f238 0x1131f239 0x1131f23a 0x1131f23b 0x1131f23c 0x1131f23d 0x1131f23e 0x1131f23f 0x1131f240 0x1131f241 0x1131f242 0x1131f243 0x1131f244 0x1131f245 0x1131f246 0x1131f247 0x1131f248 0x1131f249 0x1131f24a 0x1131f24b 0x1131f24c 0x1131f24d 0x1131f24e 0x1131f25e 0x1131f25f 0x1131f260 0x1131f261 0x1131f262 0x1131f263 0x1131f264 0x1131f265 0x1131f266 0x1131f267 0x1131f268 0x1131f269 0x1131f26a 0x1131f26b 0x1131f27e 0x1131f27f 0x1131f280 0x1131f281 0x1
Message Numbers and Symbolic Names 0x1131f286 0x1131f287 0x1131f288 0x1131f289 0x1131f28a 0x1131f28b 0x1131f28c 0x1131f28d 0x1131f28e 0x1131f28f 0x1131f290 0x1131f291 0x1131f292 0x1131f293 0x1131f294 0x1131f295 0x1131f296 0x1131f297 0x1131f298 0x1131f299 0x1131f29a 0x1131f29b 0x1131f29c 0x1131f29d 0x1131f29e 0x1131f29f 0x1131f2a0 0x1131f2a1 0x1131f2a2 0x1131f2a3 0x1131f2a4 0x1131f2a5 0x1131f2a8 0x1131f2a9 0x1131f2aa 0x1131f2ab 0x1131f2ac 0x1131f2ad 0x1131f2ae 0x1131f2cc 0x1131f2cd 0x1131f2ce 0x1131f2cf 0x11
OSF DCE Problem Determination Guide 0x1131f2dc 0x1131f2dd 0x1131f2de 0x1131f2e6 0x1131f2e7 0x1131f2e8 0x1131f2e9 0x1131f2ff 0x1131f300 0x1131f301 0x1131f302 0x1131f303 0x1131f304 0x1131f305 0x1131f306 0x1131f307 0x1131f308 0x1131f309 0x1131f30a 0x1131f30b 0x1131f30c 0x1131f30d 0x1131f30e 0x1131f30f 0x1131f310 0x1131f311 0x1131f312 0x1131f322 0x1131f323 0x1131f324 0x1131f325 0x1131f326 0x1131f327 0x1131f329 0x1131f32a 0x1131f32c 0x1131f331 0x1131f332 0x1131f333 0x1131f334 0x1131f335 0x1131f339 0x1131f33a 0x1
Message Numbers and Symbolic Names 0x1131f35c 0x1131f35d 0x1131f35e 0x1131f35f 0x1131f360 0x1131f378 0x1131f379 0x1131f37a 0x1131f37b 0x1131f38b 0x1131f38c 0x1131f38d 0x1131f38e 0x1131f38f 0x1131f390 0x1131f391 0x1131f392 0x1131f393 0x1131f394 0x1131f39d 0x1131f39e 0x1131f39f 0x1131f3a0 0x1131f3a1 0x1131f3a2 0x1131f3a3 0x1131f3a4 0x1131f3a5 0x1131f3a6 0x1131f3a7 0x1131f3a8 0x113db064 0x113db065 0x113db066 0x113db067 0x113db068 0x113db069 0x113db06a 0x113db06b 0x113db06c 0x113db06d 0x113db06e 0x113db06f 0x11
OSF DCE Problem Determination Guide 0x113db074 0x113db075 0x113db0c9 0x113db0ca 0x113db0cb 0x113db0cc 0x113db0cd 0x113db0ce 0x113db12c 0x113db12d 0x113db12e 0x113db12f 0x113db130 0x113db190 0x113db191 0x113db192 0x113db193 0x113db194 0x113db1f4 0x113db1f5 0x113db1f6 0x113db1f7 0x113db258 0x113db2bc 0x113db2bd 0x113db320 0x113db321 0x113db322 0x113db323 0x113db324 0x113db325 0x113db326 0x113db327 0x113db328 0x113db329 0x113db44c 0x113db44d 0x113db44e 0x113db44f 0x113db450 0x113db451 0x113db452 0x115ca001 0x1
Message Numbers and Symbolic Names 0x115ca006 0x115ca007 0x115ca008 0x115ca009 0x115ca00a 0x115ca00b 0x115ca00c 0x115ca00d 0x115ca00e 0x115ca00f 0x115ca010 0x115ca011 0x115ca012 0x115ca013 0x115ca014 0x115ca015 0x115ca016 0x115ca017 0x115ca018 0x115ca019 0x115ca01a 0x115ca01b 0x115ca01c 0x115ca01d 0x115ca01e 0x115ca01f 0x115ca020 0x115ca021 0x115ca022 0x115ca023 0x115ca024 0x115ca025 0x115ca034 0x115ca035 0x115ca036 0x115ca037 0x115ca038 0x115ca039 0x115ca03a 0x115ca03b 0x115ca03c 0x115ca03d 0x115ca03e 0x11
OSF DCE Problem Determination Guide 0x115ca043 0x115ca044 0x115ca045 0x115ca046 0x115ca047 0x115ca048 0x115ca049 0x115ca04a 0x115ca04b 0x115ca04c 0x115ca04d 0x115ca04e 0x115ca04f 0x115ca050 0x115ca051 0x115ca052 0x115ca053 0x115ca054 0x115ca055 0x115ca056 0x115ca057 0x115ca058 0x115ca059 0x115ca05a 0x115ca05b 0x115ca05c 0x115ca05d 0x115ca05e 0x115ca05f 0x115ca060 0x115ca061 0x115ca062 0x115ca063 0x115ca064 0x115ca065 0x115ca066 0x115ca067 0x115ca068 0x115ca069 0x115ca06a 0x115ca06b 0x115ca06c 0x115ca06d 0x1
Message Numbers and Symbolic Names 0x115ca072 0x115ca073 0x115ca074 0x115ca075 0x115ca076 0x115ca077 0x115ca078 0x115ca079 0x115ca07a 0x115ca07b 0x115ca07c 0x115ca07d 0x115ca07e 0x115ca07f 0x115ca080 0x115ca081 0x115ca082 0x115ca083 0x115ca084 0x115ca085 0x115ca086 0x115ca087 0x115ca088 0x115ca089 0x115ca08a 0x115ca08b 0x115ca08c 0x115ca08d 0x115ca08e 0x115ca08f 0x115ca090 0x115ca091 0x115ca092 0x115ca093 0x115ca094 0x115ca095 0x115ca096 0x115ca097 0x115ca098 0x115ca099 0x115ca09a 0x115ca09b 0x115ca09c 0x11
OSF DCE Problem Determination Guide 0x115ca0a1 0x115ca0a2 0x115ca0a3 0x115ca0a4 0x115ca0a5 0x115ca0a6 0x115ca0a7 0x115ca0a8 0x115ca0a9 0x115ca0aa 0x115ca0ab 0x115ca0ac 0x115ca0ad 0x115ca0ae 0x115ca0af 0x115ca0b0 0x115ca0b1 0x115ca0b2 0x115ca0b3 0x1260a0c8 0x1260a0c9 0x1260a0ca 0x1260a0cb 0x1260a0cc 0x1260a0cd 0x1260a0ce 0x1260a0cf 0x1260a0d0 0x1260a0d1 0x1260a0d2 0x1260a0d3 0x1260a0d4 0x1260a0d5 0x1260a0d6 0x1260a0d7 0x1260a0d8 0x1260a0d9 0x1260a0da 0x1260a0db 0x1260a0dc 0x1260a0dd 0x1260a0de 0x1260a0df 0x1
Message Numbers and Symbolic Names 0x1260a0e4 0x1260a0e5 0x1260a0e6 0x1260a0e7 0x1260a0e8 0x1260a0e9 0x1260a0ea 0x1260a0eb 0x1260a0ec 0x1260a0ed 0x1260a0ee 0x1260a190 0x1260a191 0x1260a192 0x1260a193 0x1260a194 0x1260a195 0x1260a196 0x1260a3e8 0x1260a3e9 0x1260a3ea 0x1260a3eb 0x1260a3ec 0x1260a3ed 0x1260a3ee 0x1260a3ef 0x1260a3f0 0x1260a3f1 0x1260a3f2 0x1260a3f3 0x1260a3f4 0x1260a3f5 0x1260a3f6 0x1260a3f7 0x1260a3f8 0x1260a3f9 0x1260a3fa 0x1260a3fb 0x1260a3fc 0x1260a3fd 0x1260a3fe 0x1260a3ff 0x1260a400 0x12
OSF DCE Problem Determination Guide 0x1260a44e 0x1260a44f 0x1260a450 0x1260a451 0x1260a452 0x1260a453 0x1260a454 0x1260a455 0x1260a456 0x1260a457 0x1260a458 0x1260a459 0x1260a45a 0x1260a45b 0x1260a45c 0x1260a45d 0x1260a45e 0x1260a45f 0x1260a460 0x1260a461 0x1260a462 0x1260a463 0x1260a464 0x1260a465 0x1260a466 0x1260a467 0x1260a468 0x1260a469 0x1260a46a 0x1260a46b 0x1260a46c 0x1260a46d 0x1260a46e 0x1260a46f 0x1260a470 0x1260a471 0x1260a472 0x1260a473 0x1260a474 0x1260a475 0x1260a476 0x1260a477 0x1260a478 0x1
Message Numbers and Symbolic Names 0x1260a47d 0x1260a47e 0x1260a47f 0x1260a480 0x1260a481 0x1260a482 0x1260a483 0x1260a484 0x1260a485 0x1260a486 0x1260a487 0x1260a488 0x1260a578 0x1260a579 0x1260a57a 0x1260a57b 0x1260a57c 0x1260a57d 0x1260a57e 0x1260a57f 0x1260a580 0x1260a581 0x1260a582 0x1260a583 0x1260a584 0x1260a585 0x1260a586 0x1260a587 0x1260a588 0x1260a589 0x1260a58a 0x1260a58b 0x1260a58c 0x1260a58d 0x1260a58e 0x1260a7d0 0x1260a7d1 0x1260a7d2 0x1260a7d3 0x1260a7d4 0x1260a7d5 0x1260a7d6 0x1260a7d7 0x12
OSF DCE Problem Determination Guide 0x1260a7dc 0x1260a7dd 0x1260a7de 0x1260a7df 0x1260a7e0 0x1260a7e1 0x1260a7e2 0x1260a7e3 0x1260a7e4 0x1260a7e5 0x1260a7e6 0x1260a7e7 0x1260a7e8 0x1260a7e9 0x1260a7ea 0x1260a7eb 0x1260a7ec 0x1260a7ed 0x1260a7ee 0x1260a7ef 0x1260a7f0 0x1260a7f1 0x1260a7f2 0x1260a7f3 0x1260a7f4 0x1260a7f5 0x1260a7f6 0x1260a7f7 0x1260a7f8 0x1260a7f9 0x1260a7fa 0x1260a7fb 0x1260a7fc 0x1260a7fd 0x1260a7fe 0x1260a7ff 0x1260a800 0x1260a801 0x1260a802 0x1260a803 0x1260a804 0x1260a805 0x1260a806 0x1
Message Numbers and Symbolic Names 0x1260a80b 0x1260a80c 0x1260a80d 0x1260a80e 0x1260a80f 0x1260a810 0x1260a811 0x1260a812 0x1260a813 0x1260a814 0x1260a815 0x1260a816 0x1260a817 0x1260a818 0x1260a819 0x1260a81a 0x1260a81b 0x1260a81c 0x1260a81d 0x1260a81e 0x1260a81f 0x1260a898 0x1260a899 0x1260a89a 0x1260a89b 0x1260a89c 0x1260a89d 0x1260a89e 0x1260a89f 0x1260a8a0 0x1260a8a1 0x1260a8a2 0x1260a8c2 0x1260a8c3 0x1260a8c4 0x1260a8c5 0x1260a8c6 0x1260a8c8 0x1260a8c9 0x1260a8ca 0x1260a8cb 0x1260a8cc 0x1260a8cd 0x12
OSF DCE Problem Determination Guide 0x1260a8d2 0x1260a8d3 0x1260a8d4 0x1260a8d5 0x1260a8d6 0x1260a960 0x1260a961 0x1260a962 0x1260a963 0x1260a964 0x1260a965 0x1260a966 0x1260a967 0x1260a968 0x1260a969 0x1260a96a 0x1260a96b 0x1260a96c 0x1260a96d 0x1260a96e 0x1260a96f 0x1260a970 0x1260a971 0x1260a972 0x1260a973 0x1260a974 0x1260a975 0x1260a976 0x1260a977 0x1260a978 0x1260a979 0x1260a97a 0x1260a97b 0x1260aa28 0x1260aa29 0x1260aa8c 0x1260aa8d 0x1260aa8e 0x1260aa8f 0x1260aa90 0x1260aa91 0x1260aa92 0x1260aa93 0x1
Message Numbers and Symbolic Names 0x1260aa98 0x1260aa99 0x1260aa9a 0x1260aa9b 0x1260aa9c 0x1260aaf0 0x1260aaf1 0x1260ab54 0x1260ab55 0x1260ace4 0x1260ace5 0x1260ace6 0x1260ace7 0x1260ace8 0x1260ace9 0x1260acea 0x1260aceb 0x1260acec 0x1260aced 0x1260acee 0x1260acef 0x1260acf0 0x1260acf1 0x1260acf2 0x1260acf3 0x1260acf4 0x1260acf5 0x1260acf6 0x1260acf7 0x1260acf8 0x1260acf9 0x1260acfa 0x1260acfb 0x1260acfc 0x1260acfd 0x1260acfe 0x1260acff 0x1260ad00 0x1260ad01 0x1260ad02 0x1260ad03 0x1260ad04 0x1260ad06 0x12
OSF DCE Problem Determination Guide 0x1260ad0b 0x1260ad1e 0x1260ad1f 0x1260ad20 0x1260ad21 0x1260ad26 0x1260ad27 0x1260ad28 0x1260ad29 0x1260ad2a 0x1260ad6e 0x1260ad6f 0x1260ad71 0x1260ad72 0x1260ad73 0x1260ad74 0x1260ad75 0x1260ad76 0x1260ad77 0x1260ad78 0x1260ad79 0x1260ad7a 0x1260ad7b 0x1260ad7c 0x1260ad7d 0x1260ad7e 0x1260ad7f 0x1260ad80 0x1260ad81 0x1260ad82 0x1260ad83 0x1260ad84 0x1260ad85 0x1260ad86 0x1260ad87 0x1260ad88 0x1260ad89 0x1260ad8a 0x1260ad8b 0x1260ad8c 0x1260ad8d 0x1260ad8e 0x1260ad8f 0x1
Message Numbers and Symbolic Names 0x1260ad94 0x1260ad95 0x1260ad96 0x1260ad97 0x1260ad98 0x1260ad99 0x1260ad9a 0x1260ad9b 0x1260ad9c 0x1260ad9d 0x1260ad9e 0x1260ad9f 0x1260ada0 0x1260ada1 0x1260ada2 0x1260ada3 0x1260ada4 0x1260ada5 0x1260ada6 0x1260ada7 0x1260ada8 0x1260ada9 0x1260adaa 0x1260adab 0x1260adac 0x1260adad 0x1260adae 0x1260adaf 0x1260adb0 0x1260adb1 0x1260adb2 0x1260adb3 0x1260adb4 0x1260adb5 0x1260adb6 0x1260adb7 0x1260adb8 0x1260adb9 0x1260adba 0x1260adbb 0x1260adbc 0x1260adbd 0x1260adbe 0x12
OSF DCE Problem Determination Guide 0x1260ae13 0x1260ae14 0x1260ae15 0x1260ae27 0x1260ae28 0x1260ae29 0x1260ae2a 0x1260ae2b 0x1260ae2c 0x1260ae2e 0x1260ae2f 0x1260ae30 0x1260ae31 0x1260ae32 0x1260ae38 0x1260ae39 0x1260ae3a 0x1260ae43 0x1260ae44 0x1260afa0 0x1260afa1 0x1260afa2 0x1260afa3 0x1260afa4 0x1260afa5 0x1260afa6 0x1260afa7 0x12862016 0x12862017 0x12862019 0x1286201a 0x1286201b 0x1286201c 0x1286201d 0x1286201e 0x12862020 0x12862021 0x12862022 0x12862024 0x12862025 0x12862026 0x12862027 0x1286202a 0x1
Message Numbers and Symbolic Names 0x12862035 0x12862036 0x12862039 0x1286203a 0x1286203c 0x1286203d 0x1286203e 0x1286203f 0x12862040 0x12862041 0x12862042 0x12862043 0x12862044 0x12862045 0x12862046 0x12862047 0x12862048 0x12862049 0x1286204a 0x1286204b 0x1286204c 0x1286204d 0x1286204e 0x1286204f 0x12862050 0x12862056 0x12862059 0x1286205a 0x1286205b 0x1286205c 0x1286205d 0x1286205e 0x1286205f 0x12862060 0x12862061 0x12862062 0x12862063 0x12862064 0x12862065 0x12862066 0x12862067 0x12862068 0x12862069 0x12
OSF DCE Problem Determination Guide 0x12862071 0x12862072 0x12862073 0x12862074 0x12862075 0x12862076 0x12862077 0x12862078 0x12862079 0x1286207b 0x1286207d 0x12862090 0x12862094 0x1286209d 0x1286209f 0x128620a3 0x128620a9 0x128620aa 0x128620ab 0x128620ad 0x128620ae 0x128620af 0x128620b1 0x128620b3 0x128620b5 0x128620b7 0x128620b8 0x128620ba 0x128620bb 0x128620bc 0x128620bd 0x128620bf 0x128620c0 0x128620c4 0x128620c5 0x128620c6 0x128620c7 0x128620ca 0x128620d2 0x128620db 0x128620dc 0x128620dd 0x128620e0 0x1
Message Numbers and Symbolic Names 0x128620e5 0x128620e7 0x128620e9 0x128620ea 0x128620eb 0x128620ee 0x128620ef 0x128620f0 0x128620f1 0x128620f2 0x128620f3 0x128620f5 0x128620f6 0x128620f7 0x128620f8 0x128620fa 0x128620fc 0x128620ff 0x12862100 0x12862101 0x12862102 0x12862103 0x12862104 0x12862105 0x12862106 0x12862107 0x12862109 0x1286210b 0x1286210e 0x1286210f 0x12862111 0x12862112 0x12862113 0x12862116 0x1286211a 0x1286211b 0x1286211d 0x1286211e 0x12862123 0x1286212a 0x12862130 0x12862131 0x12862132 0x12
OSF DCE Problem Determination Guide 0x1286213a 0x1286213b 0x1286213e 0x12862143 0x12862144 0x12862146 0x12862149 0x1286214a 0x1286214c 0x1286214e 0x12862153 0x12862157 0x1286215c 0x1286215d 0x1286215e 0x1286215f 0x12862160 0x12862161 0x12862162 0x12862165 0x12862166 0x12862167 0x12862168 0x12862169 0x1286216c 0x1286216d 0x12862181 0x12862182 0x12862183 0x12862184 0x12862185 0x12862186 0x12862187 0x12862188 0x12862189 0x1286218a 0x1286218b 0x1286218c 0x1286218d 0x1286218e 0x1286218f 0x12862190 0x12862191 0x1
Message Numbers and Symbolic Names 0x12862196 0x12862197 0x1286219b 0x1286219c 0x1286219d 0x1286219e 0x128621a0 0x128621a1 0x128621a2 0x128621a3 0x128621a4 0x128621a5 0x128621a6 0x128621a7 0x128621a8 0x128621a9 0x128621aa 0x128621ae 0x128621b0 0x128621b1 0x128621b3 0x128621b6 0x128621ba 0x128621bb 0x128621bc 0x128621bd 0x128621be 0x128621bf 0x128621c3 0x128621c4 0x128621c5 0x128621d1 0x128621d7 0x128621da 0x128621ec 0x13283001 0x13283002 0x13283003 0x13283004 0x13283005 0x13283006 0x13283007 0x13283008 0x13
OSF DCE Problem Determination Guide 0x1328300d 0x1328300e 0x1328300f 0x13283010 0x13283011 0x13283012 0x13283013 0x13283014 0x13283015 0x13283016 0x13283017 0x13283018 0x13283019 0x1328301a 0x1328301b 0x1328301c 0x1328301d 0x1328301e 0x1328301f 0x13283020 0x13283021 0x13283022 0x13283023 0x13283024 0x13283025 0x13283026 0x13283027 0x13283028 0x13283029 0x1328302a 0x1328302b 0x1328302c 0x1328302d 0x1328302e 0x1328302f 0x13283030 0x13283031 0x13283032 0x13283033 0x13283034 0x13283035 0x13283036 0x13283037 0x1
Message Numbers and Symbolic Names 0x1328303c 0x1328303d 0x1328303e 0x1328303f 0x13283040 0x13283041 0x13283042 0x13283043 0x13283044 0x13283045 0x13283046 0x13283047 0x13283048 0x13283049 0x1328304a 0x1328304b 0x1328304c 0x1328304d 0x1328304e 0x1328304f 0x13283050 0x13283051 0x13283052 0x13283053 0x13283054 0x13283055 0x13283056 0x13283057 0x13283058 0x13283059 0x1328305a 0x1328305b 0x1328305c 0x1328305d 0x1328305e 0x1328305f 0x13283060 0x13283061 0x13283062 0x13283063 0x13283064 0x13283065 0x13283066 0x13
OSF DCE Problem Determination Guide 0x1328306b 0x1328306c 0x1328306d 0x1328306e 0x1328306f 0x13283070 0x13283071 0x13283072 0x13283073 0x13283074 0x13283075 0x13283076 0x13283077 0x13283078 0x13283079 0x1328307a 0x1328307b 0x1328307c 0x1328307d 0x1328307e 0x1328307f 0x13283080 0x13283081 0x13283082 0x13283083 0x13283084 0x13283085 0x13283086 0x13283087 0x13283088 0x13283089 0x1328308a 0x1328308b 0x1328308c 0x1328308d 0x1328308e 0x1328308f 0x13283090 0x13283091 0x13283092 0x13283093 0x13283094 0x13283095 0x1
Message Numbers and Symbolic Names 0x1328309a 0x1328309b 0x1328309c 0x1328309d 0x1328309e 0x1328309f 0x132830a0 0x132830a1 0x132830a2 0x132830a3 0x132830a4 0x132830a5 0x132830a6 0x132830a7 0x132830a8 0x132830a9 0x132830aa 0x132830ab 0x132830ac 0x132830ad 0x132830ae 0x132830af 0x132830b0 0x132830b1 0x132830b2 0x132830b3 0x132830b4 0x132830b5 0x132830b6 0x132830b7 0x132830b8 0x132830b9 0x132830ba 0x132830bb 0x132830bc 0x132830bd 0x132830be 0x132830bf 0x132830c0 0x132830c1 0x132830c2 0x132830c3 0x132830c4 0x13
OSF DCE Problem Determination Guide 0x132830c9 0x132830ca 0x132830cb 0x132830cc 0x132830cd 0x132830ce 0x132830cf 0x132830d0 0x132830d1 0x132830d2 0x132830d3 0x132830d4 0x132830d5 0x132830d6 0x132830d7 0x132830d8 0x132830d9 0x132830da 0x132830db 0x132830dc 0x132830dd 0x132830de 0x132830df 0x132830e0 0x132830e1 0x132830e2 0x132830e3 0x132830e4 0x132830e5 0x132830e6 0x132830e7 0x132830e8 0x132830e9 0x132830ea 0x132830eb 0x132830ec 0x132830ed 0x132830ee 0x132830ef 0x132830f0 0x132830f1 0x132830f2 0x132830f3 0x1
Message Numbers and Symbolic Names 0x132830f8 0x132830f9 0x132830fa 0x132830fb 0x132830fc 0x132830fd 0x132830fe 0x132830ff 0x13283100 0x13283101 0x13283102 0x13283103 0x13283104 0x13283105 0x13283106 0x13283107 0x13283108 0x13283109 0x1328310a 0x1328310b 0x1328310c 0x1328310d 0x1328310e 0x1328310f 0x13283110 0x13283111 0x13283112 0x13283113 0x13283114 0x13283115 0x13283116 0x13283117 0x13283118 0x13283119 0x1328311a 0x1328311b 0x1328311c 0x1328311d 0x1328311e 0x1328311f 0x13283120 0x13283121 0x13283122 0x13
OSF DCE Problem Determination Guide 0x13283127 0x13283128 0x13283129 0x1328312a 0x1328312b 0x1328312c 0x1328312d 0x1328312e 0x1328312f 0x13283130 0x13283131 0x13283132 0x13283133 0x13283134 0x13283135 0x13283136 0x13283137 0x13283138 0x13283139 0x1328313a 0x1328313b 0x1328313c 0x1328313d 0x1328313e 0x1328313f 0x13283140 0x13283141 0x13283142 0x13283143 0x13283144 0x13283145 0x13283146 0x13283147 0x13283148 0x13283149 0x1328314a 0x1328314b 0x1328314c 0x1328314d 0x1328314e 0x1328314f 0x13283150 0x13283151 0x1
Message Numbers and Symbolic Names 0x13283156 0x13283157 0x13283158 0x13283159 0x1328315a 0x1328315b 0x1328315c 0x1328315d 0x1328315e 0x1328315f 0x13283160 0x13283161 0x13283162 0x13283163 0x13283164 0x13283165 0x13283166 0x13283167 0x13283168 0x13283169 0x1328316a 0x1328316b 0x1328316c 0x14601001 0x14601002 0x14601003 0x14601004 0x14601005 0x14601006 0x14601007 0x14601008 0x14601009 0x1460100a 0x1460100b 0x1460100c 0x1460100d 0x1460100e 0x1460100f 0x14601010 0x14601011 0x14601012 0x14601013 0x14601014 0x14
OSF DCE Problem Determination Guide 0x14601019 0x1460101a 0x1460101b 0x1460101c 0x1460101d 0x1460101e 0x1460101f 0x14601020 0x14601021 0x14601022 0x14601023 0x14601024 0x14601025 0x14601026 0x14601027 0x16c9a001 0x16c9a002 0x16c9a003 0x16c9a006 0x16c9a00d 0x16c9a010 0x16c9a011 0x16c9a012 0x16c9a014 0x16c9a016 0x16c9a017 0x16c9a01a 0x16c9a01b 0x16c9a01c 0x16c9a01d 0x16c9a01e 0x16c9a01f 0x16c9a020 0x16c9a021 0x16c9a022 0x16c9a023 0x16c9a024 0x16c9a025 0x16c9a026 0x16c9a027 0x16c9a028 0x16c9a029 0x16c9a02a 0x1
Message Numbers and Symbolic Names 0x16c9a02f 0x16c9a030 0x16c9a031 0x16c9a034 0x16c9a035 0x16c9a036 0x16c9a037 0x16c9a038 0x16c9a03a 0x16c9a03e 0x16c9a040 0x16c9a041 0x16c9a042 0x16c9a043 0x16c9a044 0x16c9a045 0x16c9a046 0x16c9a047 0x16c9a048 0x16c9a049 0x16c9a04a 0x16c9a04b 0x16c9a04c 0x16c9a04d 0x16c9a04e 0x16c9a050 0x16c9a052 0x16c9a054 0x16c9a056 0x16c9a057 0x16c9a058 0x16c9a05a 0x16c9a05b 0x16c9a05c 0x16c9a05d 0x16c9a05e 0x16c9a05f 0x16c9a060 0x16c9a061 0x16c9a063 0x16c9a064 0x16c9a065 0x16c9a066 0x16
OSF DCE Problem Determination Guide 0x16c9a06d 0x16c9a06e 0x16c9a06f 0x16c9a070 0x16c9a072 0x16c9a073 0x16c9a074 0x16c9a075 0x16c9a076 0x16c9a077 0x16c9a078 0x16c9a079 0x16c9a07a 0x16c9a07b 0x16c9a07c 0x16c9a07d 0x16c9a07e 0x16c9a07f 0x16c9a080 0x16c9a081 0x16c9a082 0x16c9a083 0x16c9a084 0x16c9a085 0x16c9a086 0x16c9a087 0x16c9a088 0x16c9a089 0x16c9a08a 0x16c9a08b 0x16c9a08d 0x16c9a08e 0x16c9a08f 0x16c9a093 0x16c9a094 0x16c9a096 0x16c9a097 0x16c9a09c 0x16c9a0a0 0x16c9a0a1 0x16c9a0a2 0x16c9a0a3 0x16c9a0a4 0x1
Message Numbers and Symbolic Names 0x16c9a0aa 0x16c9a0ab 0x16c9a0b1 0x16c9a0b5 0x16c9a0b6 0x16c9a0b7 0x16c9a0b9 0x16c9a0ba 0x16c9a0bb 0x16c9a0bc 0x16c9a0bd 0x16c9a0bf 0x16c9a0c0 0x16c9a0c1 0x16c9a0c2 0x16c9a0c3 0x16c9a0c4 0x16c9a0c5 0x16c9a0c6 0x16c9a0c7 0x16c9a0c8 0x16c9a0c9 0x16c9a0ca 0x16c9a0cb 0x16c9a0cc 0x16c9a0cd 0x16c9a0ce 0x16c9a0cf 0x16c9a0d0 0x16c9a0d1 0x16c9a0d2 0x16c9a0d3 0x16c9a0d4 0x16c9a0d5 0x16c9a0d6 0x16c9a0d8 0x16c9a0d9 0x16c9a0da 0x16c9a0db 0x16c9a0dc 0x16c9a0dd 0x16c9a0de 0x16c9a0df 0x16
OSF DCE Problem Determination Guide 0x16c9a0e4 0x16c9a0e5 0x16c9a0e6 0x16c9a0e7 0x16c9a0e8 0x16c9a0e9 0x16c9a0ea 0x16c9a0eb 0x16c9a0ec 0x16c9a0ed 0x16c9a0ee 0x16c9a0ef 0x16c9a0f0 0x16c9a0f1 0x16c9a0f2 0x16c9a0f3 0x16c9a0f4 0x16c9a0f5 0x16c9a0f6 0x16c9a0f7 0x16c9a0f8 0x16c9a0f9 0x16c9a0fa 0x16c9a0fb 0x16c9a0fc 0x16c9a0fd 0x16c9a0fe 0x16c9a0ff 0x16c9a100 0x16c9a101 0x16c9a102 0x16c9a103 0x16c9a104 0x16c9a105 0x16c9a106 0x16c9a107 0x16c9a108 0x16c9a109 0x16c9a10a 0x16c9a10b 0x16c9a10c 0x16c9a10d 0x16c9a10e 0x1
Message Numbers and Symbolic Names 0x16c9a113 0x16c9a114 0x16c9a115 0x16c9a116 0x16c9a117 0x16c9a118 0x16c9a119 0x16c9a11a 0x16c9a11b 0x16c9a11c 0x16c9a11d 0x16c9a11e 0x16c9a11f 0x16c9a120 0x16c9a121 0x16c9a122 0x16c9a123 0x16c9a124 0x16c9a125 0x16c9a144 0x16c9a145 0x16c9a146 0x16c9a147 0x16c9a148 0x16c9a149 0x16c9a14a 0x16c9a14b 0x16c9a14c 0x16c9a14d 0x16c9a14e 0x16c9a14f 0x16c9a150 0x16c9a151 0x16c9a152 0x16c9a153 0x16c9a154 0x16c9a155 0x16c9a156 0x16c9a157 0x16c9a158 0x16c9a159 0x16c9a15a 0x16c9a15b 0x16
OSF DCE Problem Determination Guide 0x16c9a160 0x16c9a161 0x16c9a162 0x16c9a163 0x16c9a164 0x16c9a165 0x16c9a166 0x16c9a167 0x16c9a168 0x16c9a169 0x16c9a16c 0x16c9a16d 0x16c9a16e 0x17083001 0x17083002 0x17083003 0x17083004 0x17083005 0x17083006 0x17083007 0x17083008 0x17083009 0x1708300a 0x1708300b 0x1708300c 0x1708300d 0x1708300e 0x1708300f 0x17083010 0x17083011 0x17083012 0x17083013 0x17083014 0x17083015 0x17083016 0x17083017 0x17083018 0x17083019 0x1708301a 0x1708301b 0x1708301c 0x1708301d 0x1708301e 0x1
Message Numbers and Symbolic Names 0x17083023 0x17083024 0x17083025 0x17083026 0x17083027 0x17083028 0x17083029 0x1708302a 0x1708302b 0x1708302c 0x1708302d 0x1708302e 0x1708302f 0x17083030 0x17083031 0x17083032 0x17083033 0x17083034 0x17083035 0x17083036 0x17083037 0x17083038 0x17083039 0x1708303a 0x1708303b 0x1708303c 0x1708303d 0x1708303e 0x1708303f 0x17083040 0x17083041 0x17083042 0x17083043 0x17083044 0x17083045 0x17083046 0x17083047 0x17083048 0x17083049 0x1708304a 0x1708304b 0x1708304c 0x1708304d 0x17
OSF DCE Problem Determination Guide 0x17083052 0x17083053 0x17083054 0x17083055 0x17083056 0x17083057 0x17083058 0x17083059 0x1708305a 0x1708305b 0x1708305c 0x1708305d 0x1708305e 0x1708305f 0x17083060 0x17083061 0x17083062 0x17083063 0x17083064 0x17083065 0x17083066 0x17083067 0x17083068 0x17083069 0x1708306a 0x1708306b 0x1708306c 0x1708306d 0x1708306e 0x1708306f 0x17083070 0x17083071 0x17083072 0x17083073 0x17083074 0x17083075 0x17083076 0x17083077 0x17083078 0x17083079 0x1708307a 0x1708307b 0x1708307c 0x1
Message Numbers and Symbolic Names 0x17083081 0x17083082 0x17083083 0x17083084 0x17083085 0x17083086 0x17083087 0x17083088 0x17083089 0x1708308a 0x1708308b 0x1708308c 0x1708308d 0x1708308e 0x1708308f 0x17083090 0x17083091 0x17083092 0x17083093 0x17083094 0x17083095 0x17083096 0x17083097 0x17083098 0x17083099 0x1708309a 0x1708309b 0x1708309c 0x1708309d 0x1708309e 0x1708309f 0x170830a0 0x170830a1 0x170830a2 0x170830a3 0x170830a4 0x170830a5 0x170830a6 0x170830a7 0x170830a8 0x170830a9 0x170830aa 0x170830ab 0x17
OSF DCE Problem Determination Guide 0x170830b0 0x170830b1 0x170830b2 0x170830b3 0x170830b4 0x170830b5 0x170830b6 0x170830b7 0x170830b8 0x170830b9 0x170830ba 0x170830bb 0x170830bc 0x170830bd 0x170830be 0x170830bf 0x170830c0 0x170830c1 0x170830c2 0x170830c3 0x170830c4 0x170830c5 0x170830c6 0x170830c7 0x170830c8 0x170830c9 0x170830ca 0x170830cb 0x170830cc 0x170830cd 0x170830ce 0x170830cf 0x170830d0 0x170830d1 0x170830d2 0x170830d3 0x170830d4 0x170830d5 0x170830d6 0x170830d7 0x170830d8 0x170830d9 0x170830da 0x1
Message Numbers and Symbolic Names 0x170830df 0x170830e0 0x170830e1 0x170830e2 0x170830e3 0x170830e4 0x170830e5 0x170830e6 0x170830e7 0x170830e8 0x170830e9 0x170830ea 0x170830eb 0x170830ec 0x170830ed 0x170830ee 0x170830ef 0x170830f0 0x170830f1 0x170830f2 0x170830f3 0x170830f4 0x170830f5 0x170830f6 0x170830f7 0x170830f8 0x170830f9 0x170830fa 0x170830fb 0x170830fc 0x170830fd 0x170830fe 0x170830ff 0x17083100 0x17083101 0x17083102 0x17083103 0x17083104 0x17083105 0x17083106 0x17083107 0x17083108 0x17122001 0x17
OSF DCE Problem Determination Guide 0x17122006 0x17122007 0x17122008 0x17122009 0x1712200a 0x1712200b 0x1712200c 0x1712200d 0x1712200e 0x1712200f 0x17122010 0x17122011 0x17122012 0x17122013 0x17122014 0x17122015 0x17122016 0x17122017 0x17122018 0x17122019 0x1712201a 0x1712201b 0x1712201c 0x1712201d 0x1712201e 0x1712201f 0x17122020 0x17122021 0x17122022 0x17122023 0x17122024 0x17122025 0x17122026 0x17122027 0x17122028 0x17122029 0x1712202a 0x1712202b 0x1712202c 0x1712202d 0x1712202e 0x1712202f 0x17122030 0x1
Message Numbers and Symbolic Names 0x17122035 0x17122036 0x17122037 0x17122038 0x17122039 0x1712203a 0x1712203b 0x1712203c 0x1712203d 0x1712203e 0x1712203f 0x17122040 0x17122041 0x17122042 0x17122043 0x17122044 0x17122045 0x17122046 0x17122047 0x17122048 0x17122049 0x1712204a 0x1712204b 0x1712204c 0x1712204d 0x1712204e 0x1712204f 0x17122050 0x17122051 0x17122052 0x17122053 0x17122054 0x17122055 0x17122056 0x17122057 0x17122058 0x17122059 0x1712205a 0x1712205b 0x1712205c 0x1712205d 0x1712205e 0x1712205f 0x17
OSF DCE Problem Determination Guide 0x17122064 0x17122065 0x17122066 0x17122067 0x17122068 0x17122069 0x1712206a 0x1712206b 0x1712206c 0x1712206d 0x1712206e 0x1712206f 0x17122070 0x17122071 0x17122072 0x17122073 0x17122074 0x17122075 0x17122076 0x17122077 0x17122078 0x17122079 0x1712207a 0x1712207b 0x1712207c 0x1712207d 0x1712207e 0x1712207f 0x17122080 0x17122081 0x17122082 0x17122083 0x17122084 0x17122085 0x17122086 0x17122087 0x17122088 0x17122089 0x1712208a 0x1712208b 0x1712208c 0x1712208d 0x1712208e 0x1
Message Numbers and Symbolic Names 0x17122093 0x17122094 0x17122095 0x17122096 0x17122097 0x17122098 0x17122099 0x1712209a 0x1712209b 0x1712209c 0x1712209d 0x1712209e 0x1712209f 0x171220a0 0x171220a1 0x171220a2 0x171220a3 0x171220a4 0x171220a5 0x171220a6 0x171220a7 0x171220a8 0x171220a9 0x171220aa 0x171220ab 0x171220ac 0x171220ad 0x171220ae 0x171220af 0x171220b0 0x171220b1 0x171220b2 0x171220b3 0x171220b4 0x171220b5 0x171220b6 0x171220b7 0x171220b8 0x171220b9 0x171220ba 0x171220bb 0x171220bc 0x171220bd 0x17
OSF DCE Problem Determination Guide 0x171220c2 0x171220c3 0x171220c4 0x171220c5 0x171220c6 0x171220c7 0x171220c8 0x171220c9 0x171220ca 0x171220cb 0x171220cc 0x171220cd 0x171220ce 0x171220cf 0x171220d0 0x171220d1 0x171220d2 0x171220d3 0x171220d4 0x171220d5 0x171220d6 0x171220d7 0x171220d8 0x171220d9 0x171220da 0x171220db 0x171220dc 0x171220dd 0x171220de 0x171220df 0x171220e0 0x171220e1 0x171220e2 0x171220e3 0x171220e4 0x171220e5 0x171220e6 0x171220e7 0x171220e8 0x171220e9 0x171220ea 0x171220eb 0x171220ec 0x1
Message Numbers and Symbolic Names 0x171220f1 0x171220f2 0x171220f3 0x171220f4 0x171220f5 0x171220f6 0x171220f7 0x171220f8 0x171220f9 0x171220fa 0x171220fb 0x171220fc 0x171220fd 0x171220fe 0x171220ff 0x17122100 0x17122101 0x17122102 0x17122103 0x17122104 0x17122105 0x17122106 0x17122107 0x17122108 0x17122109 0x1712210a 0x1712210b 0x1712210c 0x1712210d 0x1712210e 0x1712210f 0x17122110 0x17122111 0x17122112 0x17122113 0x17122114 0x17122115 0x17122116 0x17122117 0x17122118 0x17122119 0x1712211a 0x1712211b 0x17
OSF DCE Problem Determination Guide 0x17122120 0x17122121 0x17122122 0x17122123 0x17122124 0x17122125 0x17122126 0x17122127 0x17122128 0x17122129 0x1712212a 0x1712212b 0x1712212c 0x1712212d 0x1712212e 0x1712212f 0x17122130 0x17122131 0x17122132 0x17122133 0x17122134 0x17122135 0x17122136 0x17122137 0x17122138 0x17122139 0x1712213a 0x1712213b 0x1712213c 0x1712213d 0x1712213e 0x1712213f 0x17122140 0x17122141 0x17122142 0x17122143 0x17122144 0x17122145 0x17122146 0x17122147 0x17122148 0x17122149 0x1712214a 0x1
Message Numbers and Symbolic Names 0x1712214f 0x17122150 0x17122151 0x17122152 0x17122153 0x17122154 0x17122155 0x17122156 0x17122157 0x17122158 0x17122159 0x1712215a 0x1712215b 0x1712215c 0x1712215d 0x1712215e 0x1712215f 0x17122160 0x17122161 0x17122162 0x17122163 0x17122164 0x17122165 0x17122166 0x17122167 0x17122168 0x17122169 0x1712216a 0x1712216b 0x1712216c 0x1712216d 0x1712216e 0x1712216f 0x17122170 0x17122171 0x17122172 0x17122173 0x17122174 0x17122175 0x17122176 0x17122177 0x17122178 0x17122179 0x17
OSF DCE Problem Determination Guide 0x1712217e 0x17122cc0 0x17122cc1 0x17122cc2 0x17122cc3 0x17122cc4 0x17122cc5 0x17122cc6 0x17122cc7 0x17122cc8 0x17122cc9 0x17122cca 0x17122ccb 0x17122ccc 0x17122ccd 0x17122cce 0x17122ccf 0x17122cd0 0x17122cd1 0x17122cd2 0x17122cd3 0x17122cd4 0x17122cd5 0x17122cd6 0x17122cd7 0x17122cd8 0x17122cd9 0x17122d00 0x17122d01 0x17122d02 0x17122d03 0x17122d04 0x17122d05 0x17122d06 0x17122d07 0x17122d08 0x17122d09 0x17122d0a 0x17122d0b 0x17122d0c 0x17122d0d 0x17122d0e 0x17122d0f 0x1
Message Numbers and Symbolic Names 0x17122d14 0x17122d15 0x17122d16 0x17122d17 0x17122d18 0x17122d19 0x17122d1a 0x17122d1b 0x17122d1c 0x17122d20 0x17122d21 0x17122d22 0x17122d23 0x17122d24 0x17122d25 0x17122d26 0x17122d27 0x17122d40 0x17122d41 0x17122d42 0x17122d43 0x17122d44 0x17122d45 0x17122d46 0x17122d47 0x17122d48 0x17122d49 0x17122d4a 0x17122d4b 0x17122d4c 0x17122d4d 0x17122d4e 0x17122d4f 0x17122d50 0x17122d51 0x17122d52 0x17122d53 0x17122d54 0x17122d80 0x17122d81 0x17122d82 0x17122d83 0x17122d84 0x17
OSF DCE Problem Determination Guide 0x17122da1 0x17122da2 0x17122da3 0x17122dc0 0x17122dc1 0x17122dc2 0x17122dc3 0x17122dc4 0x17122dc5 0x17122dc6 0x17122dc7 0x17122dc8 0x17122dc9 0x17122dca 0x17122dcb 0x17122dcc 0x17122dcd 0x17122dce 0x17122dcf 0x17122dd0 0x17122dd1 0x17122dd2 0x17122dd3 0x17122dd4 0x17122dd5 0x17122dd6 0x17122dd7 0x17122dd8 0x17122dd9 0x17122dda 0x17122ddb 0x17122ddc 0x17122ddd 0x17122e00 0x17122e01 0x17122e02 0x17122e03 0x17122e04 0x17122e05 0x17122e06 0x17122e07 0x17122e08 0x17122e09 0x1
Message Numbers and Symbolic Names 0x17122e24 0x17122e25 0x17122e26 0x17122e27 0x17122e28 0x17122e29 0x17122e2a 0x17122e2b 0x17122e2c 0x17122e2d 0x17122e40 0x17122e41 0x17122e42 0x17122e43 0x17122e44 0x17122e45 0x17122e46 0x17122e47 0x17122e48 0x17122e49 0x17122e4a 0x17122e4b 0x17122e60 0x17122e61 0x17122e62 0x17122e63 0x17122e64 0x17122e65 0x17122e66 0x17122e67 0x17122e68 0x17122e69 0x17122e6a 0x17122e6b 0x17122e6c 0x17122e6d 0x17122e6e 0x17122e6f 0x17122e70 0x17122e71 0x17122e72 0x17122e73 0x17122e74 0x17
OSF DCE Problem Determination Guide 0x17122e79 0x17122e7a 0x17122e7b 0x17122e7c 0x17122e7d 0x17122e7e 0x17122e7f 0x17122e80 0x17122e81 0x17122ea0 0x17122ea1 0x17122ea2 0x17122ea3 0x17122ea4 0x17122ea5 0x17122ea6 0x17122ea7 0x17122ea8 0x17122ea9 0x17122eaa 0x17122eab 0x17122eac 0x17122ead 0x17122eae 0x17122eaf 0x17122eb0 0x17122eb1 0x17122eb2 0x17122eb3 0x17122eb4 0x17122eb5 0x17122eb6 0x17122eb7 0x17122eb8 0x17122eb9 0x17122eba 0x17122ebb 0x17122ebc 0x17122ebd 0x17122ebe 0x17122ebf 0x17122ec0 0x17122ec1 0x1
Message Numbers and Symbolic Names 0x17122ec6 0x17122ec7 0x17122ec8 0x17122ec9 0x17122eca 0x17122ecb 0x17122ecc 0x17122ecd 0x17122ece 0x17122ecf 0x17122ed0 0x17122ed1 0x17122ed2 0x17122ed3 0x17122ed4 0x17122ed5 0x17122ed6 0x17122ed7 0x17122ed8 0x17122ed9 0x17122eda 0x17122edb 0x17122edc 0x17122edd 0x17122ede 0x17122edf 0x17122ee0 0x17122ee1 0x17122ee2 0x17122ee3 0x17122ee4 0x17122ee5 0x17122ee6 0x17122ee7 0x17122ee8 0x17122f20 0x17122f21 0x17122f22 0x17122f23 0x17122f24 0x17122f25 0x17122f26 0x17122f27 0x17
OSF DCE Problem Determination Guide 0x17122f2c 0x17122f2d 0x17122f2e 0x17122f40 0x17122f41 0x17122f42 0x17122f43 0x17122f60 0x17122f61 0x17122f62 0x17122f63 0x17122f64 0x17122f65 0x17122f66 0x17122f67 0x17122f68 0x17122f69 0x173ca001 0x173ca002 0x173ca003 0x173ca004 0x173ca005 0x173ca006 0x173ca007 0x173ca008 0x173ca009 0x173ca00a 0x173ca00b 0x173ca00c 0x173ca00d 0x173ca00f 0x173ca010 0x173ca011 0x173ca012 0x173ca013 0x173ca014 0x173ca015 0x173ca016 0x1771b005 0x1771b006 0x1771b007 0x1771b008 0x1771b009 0x1
Message Numbers and Symbolic Names 0x1771b016 0x1771b017 0x1771b018 0x1771b019 0x1771b01b 0x1771b01f 0x1771b023 0x1771b029 0x1771b034 0x1771b037 0x1771b038 0x1771b039 0x1771b03a 0x1771b03b 0x1771b044 0x1771b04a 0x1771b04b 0x1771b04e 0x1771b051 0x1771b05e 0x1771b060 0x1771b062 0x1771b066 0x1771b06a 0x1771b06d 0x1771b06e 0x1771b06f 0x1771b073 0x1771b074 0x1771b075 0x1771b076 0x1771b079 0x1771b07a 0x1771b07b 0x1771b07c 0x1771b086 0x1771b08c 0x1771b08d 0x1771b095 0x1771b098 0x1771b099 0x1771b09a 0x1771b09b 0x17
OSF DCE Problem Determination Guide 0x1771b0a0 0x1771b0a1 0x1771b0a2 0x1771b0a3 0x1771b0a4 0x1771b0a5 0x1771b0a6 0x1771b0a7 0x1771b0a8 0x1771b0a9 0x1771b0aa 0x1771b0ab 0x1771b0ac 0x1771b0ad 0x1771b0ae 0x1771b0af 0x1771b0b0 0x1771b0b1 0x1771b0b2 0x1771b0b5 0x1771b0b6 0x1771b0b7 0x1771b0bc 0x1771b0bd 0x1771b0c4 0x1771b0ca 0x1771b0cb 0x1771b0cc 0x1771b0cd 0x1771b0ce 0x1771b0cf 0x1771b0d1 0x1771b0d4 0x1771b0d5 0x1771b0d6 0x1771b0d7 0x1771b0d8 0x1771b0d9 0x1771b0dc 0x1771b0dd 0x1771b0de 0x1771b0e1 0x1771b0e2 0x1
Message Numbers and Symbolic Names 0x1771b0e8 0x1771b0e9 0x1771b0ea 0x1771b0eb 0x1771b0ee 0x1771b0f6 0x1771b0f8 0x1771b0fb 0x1771b100 0x1771b101 0x1771b103 0x1771b10d 0x1771b10f 0x1771b111 0x1771b112 0x1771b113 0x1771b114 0x1771b116 0x1771b117 0x1771b118 0x1771b11c 0x1771b11e 0x1771b11f 0x1771b123 0x1771b127 0x1771b128 0x1771b129 0x1771b12a 0x1771b12b 0x1771b12c 0x1771b12d 0x1771b12e 0x1771b151 0x1771b152 0x1771b153 0x1771b154 0x1771b156 0x1771b157 0x1771b158 0x1771b159 0x1771b15a 0x1771b15b 0x1771b15c 0x17
OSF DCE Problem Determination Guide 0x1771b161 0x1771b162 0x1771b163 0x1771b164 0x1771b165 0x1771b166 0x1771b167 0x1771b168 0x1771b169 0x1771b16a 0x1771b16b 0x1771b16c 0x1771b16d 0x1771b16e 0x1771b16f 0x1771b170 0x1771b171 0x1771b172 0x1771b173 0x1771b174 0x1771b175 0x1771b176 0x1771b177 0x1771b178 0x1771b179 0x1771b17a 0x1771b17b 0x1771b17c 0x1771b17d 0x1771b17e 0x1771b17f 0x1771b180 0x1771b181 0x1771b182 0x1771b183 0x1771b184 0x1771b185 0x1771b189 0x1771b18e 0x1771b196 0x1771b198 0x1771b199 0x1771b19a 0x1
Message Numbers and Symbolic Names 0x1771b19f 0x177db001 0x177db003 0x177db005 0x177db006 0x177db007 0x177db008 0x177db009 0x177db00a 0x177db00b 0x177db00c 0x177db00d 0x177db00e 0x177db00f 0x177db010 0x177db011 0x177db012 0x177db013 0x177db014 0x177db015 0x177db016 0x177db017 0x177db018 0x177db019 0x177db01a 0x177db01b 0x177db01c 0x177db01d 0x177db01e 0x177db01f 0x177db020 0x177db021 0x177db022 0x177db023 0x177db024 0x177db025 0x177db026 0x177db027 0x177db028 0x177db029 0x177db02a 0x177db02b 0x177db02c 0x17
OSF DCE Problem Determination Guide 0x177db036 0x177db037 0x177db038 0x177db039 0x177db03a 0x177db03b 0x177db03d 0x177db03e 0x177db03f 0x177db040 0x177db041 0x177db081 0x177db088 0x17e43001 0x17e43002 _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ A−80 cma_s_in_use cma_s_use_error cma_s_wrongmutex cm
Message Numbers and Symbolic Names _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ 124330 ERANGE DS_E_UNWILLING_TO_PERFORM DS_E_UNAVAILABLE ______ DS_E_UNABLE_TO_PROCEED DS_E_INVALID_REF DS_E_NO_SUCH_OPERATION DS_E_PROTECTION_REQUIRED DS_E_BUSY DS_E_OUT_OF_SCOPE DS_E_CONSTRAINT_VIOLATION DS_E_
Appendix B. Message Text and Symbolic Names The table in this appendix provides a cross-reference between the text of a message and its symbolic name. If you only have the text to go by, look up that text in the following listing to find the symbolic name. You can then look in Appendix A that contains a cross-reference of message numbers and symbolic names to find the symbolic name.
OSF DCE Problem Determination Guide B−2 A call to system has failed, errno = %d. A call to wait has failed, errno = %d. A C-ISAM File could not be locked, iserrno = %d. A C-ISAM-index could not be added, iserrno = %d. A client side context handle has been incorrectly modified A command is required for trapping signals. A command may not be specified for the ’%s’ action. A communication error has occurred.
Message Text and Symbolic Names A locked C-ISAM File could not be released or unlocked, A logged data element could not be read from the logfile. A lookup on parent directory %s failed. A loop of softlinks exists for %s. A ’mask_obj’ entry and ’-mask’ option were both intentionally specified.
OSF DCE Problem Determination Guide A [ref] function result is not valid a replica has a propagation in progress A replica of directory %s was in the wrong state %d. A [represent_as] type cannot be a nonencapsulated union A requested key type is not supported A required gss_buffer_t parameter was not supplied. A required parameter was missing. A ROS-function failed (code = %d, class = %d, value = %d) A semctl system call has failed (command = %d, errno = %d).
Message Text and Symbolic Names A [transmit_as] transmitted type cannot contain a [%1$s] type A [transmit_as] type cannot be a nonencapsulated union A type used in a [transmit_as] clause cannot have a [represent_as] type A type with the [represent_as] attribute cannot be conformant A type with [transmit_as] cannot have other type attributes A union discriminator type must be small, short, long, char, boolean, or enum A [unique] function result is not valid A unique ID could not be generated for a C-ISAMFile
OSF DCE Problem Determination Guide Account name is too long (Registry Edit Kernel) ACCOUNT NOT ADDED: (%s %s %s)n account not valid for login Account password is required to create an account Account password to long. Maximum password length is %d. ek_err_login_name_too_long pwd_imp_msg_add_acct_fail sec_login_s_acct_invalid dcp_s_rgy_acct_no_passwd dcp_s_rgy_acct_passwd_long Account shell name to long. Maximum shell name length is %d.
Message Text and Symbolic Names Acronym %s cannot have unlimited recurrence.n Action cannot be performed by IDL Encoding Services Active soundex algorithm: %s, Add memberships from imported group file.n Add to propagation queue failed. add_cell_alias: Could not create child pointer in parent directory: status = %ld.
OSF DCE Problem Determination Guide An arm of a union cannot be or contain a [ref] pointer An arm of a union cannot be or contain a [unique] pointer An array with [%1$s] base type cannot have the [ptr] or [unique] attributes An array with a pointer attribute is valid only as a parameter An attempt is made to add an attribute or value that already exists. An attempt is made to use optional An attempt was made to abandon an operation. It failed.
Message Text and Symbolic Names An internal list is out of order. Thread will exit. An invalid audit record descriptor was used An invalid audit trail descriptor was used An invalid context argument was supplied. An invalid conversion character is found in message 0x%lx. An invalid line %s was found in event class file %s An invalid name argument was supplied. An invalid pointer supplied as a function argument. An invalid session argument was supplied. An invalid state was returned from the server.
OSF DCE Problem Determination Guide Area code of E.
Message Text and Symbolic Names Assertion failed! Assertion "%s" failed in "%s"file> line <%d Association group maximum exceeded Association group not found Association shutdown Asynchronous or General cancelability was on. Asynchronous or General cancelabilty was off. at least one control permission bit required on acl At least one of the options ’-add’ or ’-remove’ is required.
OSF DCE Problem Determination Guide Attribute [%1$s] cannot be applied to a void * type NIDL_ATTRPTRVOID Attribute cannot be used more than once Attribute [context_handle] only applies to void * types attribute instance already exists attribute instance not found attribute name already exists Attribute name contains an illegal character (Registry Edit Kernel) Attribute name too long (Registry Edit Kernel) Attribute %s missing for %s.
Message Text and Symbolic Names 124330 Authentication key version not available Authentication message out of order Authentication message stream modified Authentication protocol version mismatch Authentication request is a replay authentication service invalid Authentication service key not available rpc_s_auth_badkeyver rpc_s_auth_badorder rpc_s_auth_modified rpc_s_auth_badversion rpc_s_auth_repeat sec_priv_s_invalid_authn_svc rpc_s_auth_nokey Authentication ticket expired Authentication ticket is not
OSF DCE Problem Determination Guide bad level "%s" Bad manager type parameter to dce_acl_register_object_type() Bad mechanism-type in gss_display_status Bad name . %s bad operations "%s": should be one or more of rwu Bad or invalid dce attr binding handle Bad or invalid dce attr cursor Bad or invalid dce attr name(s) Bad or invalid dce attr schema object name(s) Bad or wrong arguments bad parameter for acl operation bad parameter for schema or attribute operation Bad propagation type.
Message Text and Symbolic Names 124330 binding error on acl operation Binding import from namespace fails: %s Binding incomplete (no object ID and no endpoint) Binding type of extended attribute is unknown. Binding vector full Bindings length wrong (should be %d, was %d) bogus interpreter argument! Bogus password pickle Both the options %s and %s specified. Buffer not usable by IDL Encoding Services Buffer too small Buffer too small Cache corrupt: Bad cache version number or name. Cache entry not found.
OSF DCE Problem Determination Guide Calls too large for well known endpoint Can not read dtsd bindings file. Check to see if dtsd is running. Cancel timeout Cannot accept Cannot access endpoint database Cannot access file %s.n cannot access local registry Cannot access memory data, shmid(%d) has %d users. Cannot add another instance of this attribute due to lack of multi-value capability.
Message Text and Symbolic Names cannot create database Cannot create endpoint database Cannot create key management thread sec_rgy_rep_cannot_create_db ept_s_cant_create dced_s_cannot_create_key_mgmt_thr cannot create local registry Cannot create master_key: Error converting Cannot create master_key. Error generating initial keyseedn%s Cannot create master_key: Error generating random master_keyn%s Cannot create master_key: Error initializing random key generatorn%s Cannot create master_key.
OSF DCE Problem Determination Guide Cannot get override information due to server connection rejected.
Message Text and Symbolic Names 124330 cannot open database Cannot open decnet port Cannot open directory <%s>.n Cannot open esl file %s Cannot open esl update file %s Cannot open ethernet port Cannot open event class directory %s to read. Cannot open event class file %s to read.
OSF DCE Problem Determination Guide B−20 Cannot register daemon’s svc manager bindings with RPCD Cannot register servern%s Cannot register with nameservicen%s Cannot remove individual credentials from VM ccache Cannot remove the root directory from clearinghouse %s.
Message Text and Symbolic Names Cannot update child pointer for directory %s: status = %ld. Cannot update endpoint database Cannot update rgy_state filen%s cannot write data to a read-only field (Registry Edit Kernel) Cannot write to closed log file Can’t access gda_id file %s : status = %s. Can’t acquire Kerberos credential cache in gss_init_sec_ctx Cant add alias for this name or principal (e.g.
OSF DCE Problem Determination Guide Can’t import attributen%s Can’t initialise parent pointer : status = %ld Can’t initialize clerk managment ACL. Can’t initialize GENERAL managment ACL. Can’t initialize shared memory cache. Can’t map NSAP-address information Can’t open connection to registry. Can’t open ’%s’ for input, %s.n Can’t open ’%s’ for logging, %s.
Message Text and Symbolic Names Chaining is required to perform Channel-bindings mismatch Character sets are not compatible Checking of syntax in the input failed. No output generated.n Checkpoint interval not a positive number. Checksum is of wrong type Checksum length wrong Checksum too short Checksum type not supported child killed: %sn child process exited abnormally Child process killed, signal = %d.
OSF DCE Problem Determination Guide Closing connection to registry.n pwd_imp_inf_close_rgy Closing import files.n Code set registry access succeeded. Command does not accept a list of names as argument.
Message Text and Symbolic Names 124330 Connection closed Connection closed by remote host Connection request rejected Connection request timed out Constant name: %1$s not found Constant type does not agree with constant expression Context ( %s ) - wait %d seconds before refreshing Context handle is not valid as a member of a union rpc_s_connection_closed rpc_s_connect_closed_by_rem rpc_s_connect_rejected rpc_s_connect_timed_out NIDL_CONSTNOTFND NIDL_CONSTTYPE Context handle not valid Context handles are
OSF DCE Problem Determination Guide Could not get pathname of current directory ( %s ). Could not initialize acl list Could not initialize cache: Cache size is too small to continue. Could not initialize condition variable Could not initialize journal list Could not initialize login list Could not initialize mutex Could not insert cache header into freelist, expected lock is not held. Could not insert element into LRU list, element already on LRU list. Could not into a linked list, already in list.
Message Text and Symbolic Names 124330 Could not write into file %s.
OSF DCE Problem Determination Guide Couldn’t delete GSSAPI mutex attributes (%x) Couldn’t delete GSSAPI registry mutex attributes (%x) Couldn’t delete server entry from LAN/Cell profile: %s Couldn’t export Global Time Server entry to the namespace: %s Couldn’t export the ACL manager interface: %s Couldn’t extract interface ID from time service interface: %s couldn’t find "%.
Message Text and Symbolic Names couldn’t read file "%s": %s couldn’t read file "%s": %s couldn’t readlink "%s": %s Couldn’t register default GSSAPI message table (%x) tcl_s_unixutil_no_read_file tcl_s_unixutil_cannot_read_file tcl_s_unixaz_no_readlink gss_s_cant_reg_table Couldn’t register DTS object type with ACL library: %s Couldn’t register Global Time Server interface: %s Couldn’t register server authentication info: %s Couldn’t register the ACL manager interface: %s Couldn’t register the Version 0 rd
OSF DCE Problem Determination Guide B−30 Couldn’t set GSSAPI element mutex attributes (%x) Couldn’t set GSSAPI mutex attributes (%x) Couldn’t set GSSAPI registry mutex attributes (%x) couldn’t set loop variable couldn’t set variable "%s" couldn’t stat file "%s": "%s" couldn’t stat "%s": %s couldn’t store default value in variable "%s" Couldn’t store the auditd ACL in the ACL file : %lx Couldn’t store the dtsd ACL in the ACL file: %s Couldn’t translate name in gss_init_sec_ctx (%x) Couldn’t unregister the
Message Text and Symbolic Names 124330 Cred_expand_id - Gen_name failed (%x) gss_s_cei_gn_failed Cred_expand_id - Parse_name failed (%x) cred_expand_id - Registry server unavailable Cred_expand_id failed in gss_accept_sec_ctx (%x) Cred_info_to_gss - Couldn’t lock cred-list Critical service extension cannot be provided. cthread create failed cthread invoke disabled cthread pool exists Ctx_info_to_gss - Couldn’t lock ctx-list ctx_ptr->client_name non-NULL. Freeing it... ctx_ptr->client_name non-NULL.
OSF DCE Problem Determination Guide B−32 Data string format not valid for the specified field (Registry Edit Kernel) Data type %1$s must be defined in %2$s Data type of %1$s must be a named TPS_STDL_ type Data type of [switch_is] variable %1$s does not agree with [switch_type] %2$s Data version number not found for directory ID %d.
Message Text and Symbolic Names dce_acl_obj_add_any_other_entry returned status %ld : %s dce_acl_obj_add_group_entry returned status %ld : %s dce_acl_obj_add_unauth_entry returned status %ld : %s dce_acl_obj_add_user_entry returned status %ld : %s dce_acl_obj_init returned status %ld : %s dce_acl_register_object_type returned status %ld : %s dce_aud_open received invalid option combination dcecp convenience variable is read-only Debug option used without DCE_DEBUG defined.
OSF DCE Problem Determination Guide Directory id %d already configured as a client system and overwrite switch was not set.
Message Text and Symbolic Names 124330 ek_misc_PAD7 ek_misc_PAD8 ek_misc_PAD9 ek_misc_PADa ek_misc_PADb ek_misc_PADc ek_misc_PAD7 ek_misc_PAD8 ek_misc_PAD9 ek_misc_PADa ek_misc_PADb ek_misc_PADc ek_misc_PADd ek_misc_PADe ek_misc_PADf ek_PAD0 ek_PAD1 ek_PAD2 ek_PAD3 ek_PAD4 ek_PAD5 ek_PAD6 ek_PAD7 ek_PAD8 ek_PAD9 Empty Attribute Definition Block. Empty Object Class Definition Block. Empty OM Class Definition Block. Empty set. Encoding type is ambiguous. Encoding type is missing. Encoding type is unknown.
OSF DCE Problem Determination Guide Entry is an alias (Registry Edit Kernel) Entry monitor process Entry monitor process (RPC-server serviceability) Entry not found Entry not found. Entry not found (Registry Edit Kernel) Entry option used with a string binding. for Entry %s exists and has been modified in X.500 Entry Stub of Directory ID: %d Environment variable DCEAUDITTRAILSIZE has an invalid value.
Message Text and Symbolic Names 124330 Error checkpointing an uninitialized databasen%s error closing file "%s": "%s" error closing "%s": %sn Error converting cell name to local realm principal Error converting cell uuid to string Error decoding BER token header. The token is corrupt. Error decoding token. The token is corrupt.
OSF DCE Problem Determination Guide Error trying to load a clearinghouse from disk into memory: status = %ld. Error trying to obtain cell information for X.500: status = %ld. cds_s_server_loadfail_eb Error unwrapping per-message token (%x) error waiting for process to exit: %s Error when adding principal to org "%s" - %sn Error when adding "%s" - %sn Error while calculating the country bitlist.
Message Text and Symbolic Names 124330 expression didn’t have numeric value Extended attribute internal error. extra characters after close-brace extra characters after close-quote extra switch pattern with no body Failed converting clearinghouse uuid from global directory : status = %ld. Failed converting namespace uuid from global directory : status = %ld.
OSF DCE Problem Determination Guide Failed to open file %s Failed to open log file Failed to open the hostdata postprocessor list file Failed to read string bindings for local dts from file: %s Failed to rebind to an alternate registry siten%s Failed to refresh server identity: status = %ld. Failed to refresh server identity: status = %ld.
Message Text and Symbolic Names 124330 Failed to unregister Serviceability interface from the endpoint map: %s Failed to validate the servers identity: %s Failed to write local string bindings for dtsd to file: %s Failure Failure converting name to X.500 object.
OSF DCE Problem Determination Guide field width may not be specified in %c conversion File = %s: Line = %d: Error = %s (near String = File %1$s, line %2$lu File %1$s, line %2$lu: %3$s File %1$s not found File containing ASCII/EBCDIC translation tables is damaged File could not be closed, errno = %d. File could not be closed, errno = %d. File could not be flushed, errno = %d. File could not be read, errno = %d. File could not be read, errno = %d.
Message Text and Symbolic Names For delegation support, the CDS_DirectoryVersion attribute is required to be 4.0 or greater. For high convergence Tue Oct 16 09:43:06 1990 Foreign account not specified. Foreign cell is not registered or has been removed Foreign cell %s is not registered or has been removed Foreign group is not registered or has been removed Foreign group name not specified. Foreign group %s is not registered or has been removed Foreign organization name not specified.
OSF DCE Problem Determination Guide B−44 get_configuration failure get_preferred_member: No cell alias detected. Global Directory Agent exitting.
Message Text and Symbolic Names high guard failed at %lx, %s %dn Home directory pathname text is too long (Registry Edit Kernel) host configuration info not available I18N tags structure is not valid iconv failed other than conversion operation identity to be refreshed is no longer valid Ignoring name conflict, as instructedn illegal access mode "%s" Illegal attribute value for cdsbyte style attribute. Illegal cell name : %s Illegal character encountered in principal name.
OSF DCE Problem Determination Guide Illegal IPC-server mode parameter (server mode = %d) Illegal IPC-server-ID parameter (server-ID = %d) Illegal IPC-version number parameter (version = %d) Illegal IPC-wait time parameter (wait time type = %d) illegal keep count "%s" Illegal key for policy data Illegal ’max. # of distributed command entries’ switch value Illegal ’max. # of IPC-client entries’ switch value Illegal ’max. # of IPC-heap buffer entries’ switch value Illegal ’max.
Message Text and Symbolic Names 124330 Illegal state transition detected in CN server call state machine [cur_state: %d, cur_event: %d, call_rep: %x] Illegal state/event combination detected (state = %d, rpc_m_cn_ill_state_trans_sr Illegal switch (switch = -%c)nvalid switches are:n Illegal timeout parameter (timeout = %d sec) illegal use of | or |& in command illegal use of default sec login handle Illegal use of ’-type’ option.
OSF DCE Problem Determination Guide Index type is not known or incorrectly specified. Information not available Initialization completed successfully initialization encryption key not valid Initialization failed : %s Initialization of RPC interface has failed. Initializing credentials failed for auth. mech.
Message Text and Symbolic Names Interface attributes [in_line] and [out_of_line] cannot occur together Interface id not entered Interface not found Interface UUID must be specified Interface version number not recognizable. Interface’s stub/runtime version is unknown Interface’s version is unknown Intermediate code sets should not exceed %d.
OSF DCE Problem Determination Guide B−50 invalid acl entry class Invalid ACL entry key. Invalid ACL entry type. invalid acl handle Invalid acl manager name. Invalid acl manager syntax. invalid acl manager type Invalid acl manager type specified invalid acl object name Invalid acl_mgr_set specified invalid acl_mgr_set specified Invalid acronym %s for object class.n Invalid acronym %s for structure rule table.n Invalid action ’%s’, should be one of: default, ignore, error, trap, get, block, or unblock.
Message Text and Symbolic Names 124330 Invalid authorization service: status code = %d Invalid binding cds_s_server_badauthz rpc_s_invalid_binding invalid binding information Invalid binding syntax. Invalid call option Invalid case label type Invalid character input for conversion Invalid character literal Invalid Class Name.
OSF DCE Problem Determination Guide B−52 invalid cursor Invalid data - record too long (Registry Edit Kernel) Invalid data description length parameter in TProutine call Invalid data description length parameter in TProutine call Invalid data record Invalid database keytype at line %d file %s. Invalid database node type at line %d file %s. Invalid DBSetMember_t pointers for timestamp check. Invalid debug level %ld. sec_attr_bad_cursor ek_misc_bad_data GDS_S_INVDATA_ERR Invalid default cell name.
Message Text and Symbolic Names Invalid intercell action. Invalid intercell action specified invalid intercell action specified Invalid interface version option Invalid IPC-message tag (tag = %#x, should be %#x) Invalid IPC-version number (version = %d) Invalid key data has been supplied Invalid log entry module or operation Invalid MAC-address (ethernet address) (size = %d, shuild be %d) Invalid mapping rule parameter (mapping rule = %d) Invalid ’-mask’ option value.
OSF DCE Problem Determination Guide B−54 invalid or unsupported attribute type sec_attr_bad_type Invalid org name - %s Invalid pad byte (%d) Invalid pad check-bytes Invalid parameter passed as an argument. Invalid parameter passed as an argument. Invalid parameters on command line: Invalid password Invalid password. Invalid password (Registry Edit Kernel) Invalid permanent virtual call number (number = %d, %d <= number <= %d) invalid permission set Invalid permission string.
Message Text and Symbolic Names Invalid size limit "%s". Invalid size of an attribute value (length = %d, maximum = %d) Invalid size of object identifier (length = %d, maximum = %d) Invalid size of serviceability information (size = %d,n Invalid state machine state Invalid storage class parameter (storage class = %d) Invalid string binding Invalid string UUID Invalid switch detectedn Invalid time limit "%s".
OSF DCE Problem Determination Guide Invalid XTI-provider name or index (name = ’%s’, index = %d) invoked "break" outside of a loop invoked "break" outside of a loop invoked "continue" outside of a loop invoked "continue" outside of a loop IPC-association limit exceeded (limit = %d) IPC-communication buffer too small IPC-distributed command entry limit exceeded (limit = %d) IPC-function call not allowed in this state (state = %d) IPC-heap memory limit exceeded (memory size requested = %d) IPC-message of inva
Message Text and Symbolic Names 124330 Lexical analyser: multiple use of same CC (communication Lexical analyser: port number range exceeded (port = %d, maximum = %d) %s Lexical analyser: same DSP-part number specified twice %s GDS_S_NDS_LEX_ERR4 Lexical analyser: syntax error %s Lifespan is not a number or in valid format (Registry Edit Kernel) Lifespan out of range (Registry Edit Kernel) Line %d of named.ca: class syntax error. Line %d of named.ca: data syntax error. Line %d of named.
OSF DCE Problem Determination Guide Login context already specifies a delegation chain.
Message Text and Symbolic Names Maximum identifier length for [handle] type is %1$lu characters Maximum identifier length for interface name is %1$lu characters Maximum identifier length for [out_of_line] type is %1$lu characters Maximum identifier length for pipe type is %1$lu characters Maximum identifier length for pointed-to type is %1$lu characters Maximum identifier length for [represent_as] type is %1$lu characters Maximum identifier length for type with [transmit_as] is %1$lu characters Maximum memo
OSF DCE Problem Determination Guide B−60 Missing attribute information. Missing attribute information - %s. Missing attribute value - %s. Missing Attribute Value Assertion - %s. Missing authentication type. missing %c Missing class value - %s.
Message Text and Symbolic Names Missing start of class block operator - %s. Missing start of Object Class Definition Block. Missing start of OM Class Definition Block. Missing the PSAP address for %s.n Missing time limit. Missing type on parameter declaration Missing user name. Missing value. Modification affects several DSAs and is prohibited. Modification to an interior node of the DIT is prohibited.
OSF DCE Problem Determination Guide B−62 Name is either a NULL pointer or a null string.
Message Text and Symbolic Names 124330 No cell alias name. No cell name. No checksum found in authenticator No clearinghouse name. No clearinghouse or a server. No clearinghouse returned by server No compatible code set found No currently established network identity for which context exists No default context in login_context_to_cred No default message found no default replica No directory name.
OSF DCE Problem Determination Guide No member name given dcp_s_rpc_no_member_name No member name was specified. No membership info exists for the specified PGO object (Registry Edit Kernel) No memory available No memory for building replica set.
Message Text and Symbolic Names no override information available No permission for name service operation No permission to open message catalog No postprocessors have been defined No principal name. no privilege attributes available sec_login_s_no_override_info rpc_s_no_ns_permission msg_s_no_cat_perm dced_s_no_postprocessors dcp_s_rgy_no_princ_name sec_s_no_pac No protocol sequences No protocol sequences registered no random key seed set yet.
OSF DCE Problem Determination Guide Not a fully qualified schema name. Not a global time server Not a group Not a privileged user Not a supported request not a valid DFS acl Not a valid UNIX id.
Message Text and Symbolic Names NULL or nil UUID for server instance NULL parameter Null registry login handle. Null value of [in] context handle or all [in,out] context handles Number of entries missing in asn1_attr file. Object already exists object found was not in scope Object Manager %s call failed: status = %ld.
OSF DCE Problem Determination Guide Operation not supported on specified domain (Registry Edit Kernel) operation not supported on this object type Operation not valid on a reserved name (Registry Edit Kernel) Operation not valid on local context Operation not valid on the specified domain (Registry Editor/TTY Interface) Operation not yet implemented Operation not yet implemented Operation not yet implemented (Registry Edit Kernel) operation on acl not authorized Operation out of range Operation with [decode
Message Text and Symbolic Names 124330 OS call to open the file for writing Out of memory Out of memory Out of memory Out of memory Out of memory in gss_build_prot_message Out of memory in gss_display_name Out of memory in nm_oid_copy Out of memory in nm_oid_set_add_elem Out of memory in nm_oid_set_create_empty Out of memory in pac_to_name Out of memory in string_to_irep Out of memory while trying to run down contexts of client %x out of space Outcome %lx supplied in dce_aud_commit is not consistent with
OSF DCE Problem Determination Guide Parser: Inconsistent use of interface names (%s != %s) %s Parser: Inconsistent use of profile-ID (%d != %d) %s Parser: Maximal number of interface descriptions exceeded (maximum = %d) %s Parser: Maximum number of net-address descriptions exceeded (maximum = %d) %s Parser: Maximum number of NSAP-address address map Parser: Maximum number of profile descriptions exceeded (maximum = %d) %s Parser: No interface description found %s Parser: No NSAP-address found %s Parser: Pro
Message Text and Symbolic Names Passwords must contain at least one non-blank character (Registry Edit Kernel) Perform bind operation first. Permanent virtual call (PVC)-number missing Permission denied Permission denied without proper protection level.
OSF DCE Problem Determination Guide B−72 Postprocessor for %s exited with status %d Preauthentication failure. Preparing import files.
Message Text and Symbolic Names 124330 Profile element (%s) added Profile element (%s) not added Profile name is NULL propagate updates to slaves Propagation failed : %s Propagation succeeded Propagation threads not created propagation type not init or initing Protection level changed unexpectedly Protocol error protocol level invalid Protocol sequence not supported PSAP string "%s" not found in %s.
OSF DCE Problem Determination Guide (receive_packet) assoc->%x %s: Protocol version mismatch - major->%x minor->%x Receiver cannot support authentication subtype Receiving of an attention message failed (fd = %d, errno = %d) Receiving of an IPC-message failed Redirection of ’stdout’ failed (errno = %d) Reenter password to verify: Referral returned - %s.
Message Text and Symbolic Names Replica is in dupe master state but is not the master Replica is in maintenance state but is not the master Replica is no longer the master. Replica is not the master Replica is the master sec_rep_dupe_not_master sec_rep_maint_not_master sec_rs_rep_not_master sec_rgy_rep_not_master sec_rgy_rep_master Replica not registered with nameservice Replica ’%s’ contains more up-to-date information.
OSF DCE Problem Determination Guide B−76 Required organization name attribute not provided. Requires more options. Requires more options.
Message Text and Symbolic Names Routine pthread_cond_broadcast(3) failed : status = %ld. Routine pthread_cond_destroy failed : status = %ld. Routine pthread_cond_destroy failed : status = %ld. Routine pthread_cond_init failed : status = %ld. 124330 cds_s_pthreadcondbroadcast_a cds_s_pthreadconddestroy cds_s_pthreadconddestroy_a cds_s_pthreadcondinit Routine pthread_cond_init failed : status = %ld. Routine pthread_cond_signal failed : status = %ld. Routine pthread_cond_signal failed : status = %ld.
OSF DCE Problem Determination Guide Routine rpc_binding_set_object(3rpc) failed: status = %ld. Routine rpc_binding_to_string_binding(3rpc) failed : status = %ld. Routine rpc_ep_register(3rpc) failed: status = %ld. Routine rpc_ep_resolve_binding(3rpc) failed : status = %ld. Routine rpc_ep_unregister(3rpc) failed: status = %ld. Routine rpc_ns_binding_export(3rpc) failed: status = %ld. Routine rpc_ns_binding_unexport(3rpc) failed: status = %ld. Routine rpc_server_init() failed : status = %ld.
Message Text and Symbolic Names Routine sec_rgy_site_open(3sec) failed: status = %ld. Routine semop(2) failed: %s. Routine sendto(2) failed : status = %ld. Routine setsid(2) failed(%s) trying to set process group id Routine socket(2) failed : status = %ld. Routine socket(2) failed to create child socket : errno = %ld Routine uuid_from_string(3rpc) failed : status = %ld. Routine write(2) failed : status = %ld. Routine write(2) failed for shmid file %s with status %ld.
OSF DCE Problem Determination Guide %s: call failed (%s) Call not implemented (%s) Can’t create UUID (%s) Can’t handle pre-v2 server stubs (%s) Can’t open file %s. (%s %d) is the conflicting entry from the registry.n (%s) DG packet free pool is corrupted %s distinguished thread cancelled "%s" doesn’t appear in event (%s) Error message will not fit in packet (%s) Event list full %s exits normally %s failed ; errno text : %s %s failed, errno = %d %s failed for unknown reason.
Message Text and Symbolic Names (%s) Socket’s maximum receive buffering is less than NCA Connection Protocol minimum requirement %s thread cancelled. Execution terminated.
OSF DCE Problem Determination Guide B−82 SEC_ACL_EDIT - invalid operation on this entry type SEC_ACL_EDIT - invalid option SEC_ACL_EDIT - invalid or unknown entry key deif_err_invalid_entry_op SEC_ACL_EDIT - invalid permission string SEC_ACL_EDIT - operation requires argument SEC_ACL_EDIT - specified entry not found SEC_ACL_EDIT - too many arguments SEC_ACL_EDIT - unable to communicate with registry server SEC_ACL_EDIT - unable to open file SEC_ACL_EDIT - unable to parse string SEC_ACL_EDIT - unknown co
Message Text and Symbolic Names 124330 sec_acl_PADe sec_acl_PADf sec_attr_PAD8 sec_attr_PAD9 sec_attr_PADa sec_attr_PADb sec_attr_PADc sec_acl_PADe sec_acl_PADf sec_attr_PAD8 sec_attr_PAD9 sec_attr_PADa sec_attr_PADb sec_attr_PADc sec_attr_PADd sec_attr_PADe sec_attr_PADf sec_cred_get_delegation_type failed (%x) sec_cred_get_initiator failed in pac_to_name (%x) sec_cred_get_pa_data failed in pac_to_name (%x) sec_cred_s_PAD3 sec_cred_s_PAD4 sec_cred_s_PAD5 sec_cred_s_PAD6 sec_cred_s_PAD7 sec_cred_s_PAD8
OSF DCE Problem Determination Guide B−84 sec_id_e_PADd sec_id_e_PADe sec_id_e_PADf sec_id_parse_name returned status %ld to general : %s sec_kdc_s_PAD0 sec_kdc_s_PAD1 sec_kdc_s_PAD2 sec_kdc_s_PAD3 sec_id_e_PADd sec_id_e_PADe sec_id_e_PADf cds_s_parse_name sec_kdc_s_PAD4 sec_kdc_s_PAD5 sec_kdc_s_PAD6 sec_kdc_s_PAD7 sec_kdc_s_PAD8 sec_kdc_s_PAD9 sec_kdc_s_PADa sec_kdc_s_PADb sec_kdc_s_PADc sec_kdc_s_PADd sec_kdc_s_PADe sec_kdc_s_PADf sec_key_mgmt_s_PAD2 sec_key_mgmt_s_PAD3 sec_key_mgmt_s_PAD4 sec_key_mgmt
Message Text and Symbolic Names 124330 sec_krb_gss_decode_message failed (%x) sec_krb_gss_decode_rep_message failed (%x) sec_login_setup_identity failed (%x) sec_login_s_PADe sec_login_s_PADf sec_login_valid_from_keytable failed (%x) sec_lrgy_s_PAD1 sec_lrgy_s_PAD2 sec_lrgy_s_PAD3 sec_lrgy_s_PAD4 gss_s_ac_skdm_failed gss_s_ic_mutual_dec_failed gss_s_gac_sls_failed sec_login_s_PADe sec_login_s_PADf gss_s_gac_slv_failed sec_lrgy_s_PAD1 sec_lrgy_s_PAD2 sec_lrgy_s_PAD3 sec_lrgy_s_PAD4 sec_lrgy_s_PAD5 sec_lr
OSF DCE Problem Determination Guide security server program error security service does not support version 1.1 security features secval service already enabled secval service is not enabled Seek operation on file failed, errno = %d. Select one of: (a)lias, (g)enerate, (e)nter, (s)kip entry, (h)elp: Semaphore operation failed (operation = %d, errno = %d).
Message Text and Symbolic Names Setting account valid flag for %s accountn Setting password valid flag for %s accountn Setting policy account lifespan to %d minutes (or %d hours or %d days)n Setting policy password expiration time to %d minutes from nown Setting policy password lifetime to %d minutesn Setting %s account good_since_date to nown Setting %s account to expire in %d minutesn Setting up registry information.n Shared memory id (%d) invalid : status = %ld. Shared memory id is required.
OSF DCE Problem Determination Guide Slave wants init to re-sync with master %sn sec_rgy_rep_must_init_slave pwd_imp_msg_conflict_rgy_st Socket failure Software error detected in server Software version incompatible with master’s version. Server is going to exit Some part of the Directory Some part of the Directory is currently not available. Some permanent difficulty encountered.
Message Text and Symbolic Names Subnetwork-ID missing Subordinates not found. Subtracting an absolute timestamp from a relative timestamp is not allowed. Success, may be stale Successful completetion. Successful completion Successful completion Successful completion.
OSF DCE Problem Determination Guide Supplied value for attribute of type void must be Supplied value for extended attribute is not a valid byte sequence. Supplied value for extended attribute is not a valid uuid. Supplied value for extended attribute is not an integer. Supplied value for extended attribute is not less than %d.
Message Text and Symbolic Names The array size attribute variable %1$s cannot have the [ptr] or [unique] attributes The attribute [%1$s] can occur at most once per operation The attribute [%1$s] on a field is not allowed NIDL_SIZEPRMPTR The attribute [%1$s] on a parameter is not allowed The attribute [%1$s] on a type is not allowed The attribute [%1$s] on a union member is not allowed The attribute [%1$s] on an interface is not allowed The attribute [%1$s] on an operation is not allowed The attribute [bro
OSF DCE Problem Determination Guide The attribute [ptr] is not valid on pipe parameters The attribute [ptr] is valid only for pointer types or array parameter types The attribute [ref] is valid only for pointer types or array parameter types The attribute %s is not settable when dtsd is running as a clerkn The attribute ’%s’ should be a multi-valued attribute type.
Message Text and Symbolic Names The attributes [max_is] and [size_is] cannot occur together The audit action ’%s’ is not valid. The audit condition ’%s’ is not valid. The Audit daemon cannot change to working directory %s The audit daemon started The audit library could not backup a trail file due to failure of utc_gettime call for reading time from the system. The audit library could not backup a trail file due to failure of utc_gmtime call for reading time from the system.
OSF DCE Problem Determination Guide The command requires one of the ’-state’, ’stostrategy’ or ’-change’ options. dcp_s_aud_modify_need_opt The command supplied wrong key value: ’%s’ The complete IPC-request message exceeds the upper limitn The context did not contain a PAC. The context does not support confidentiality protection The context is not available for the attempted operation The count of audit record tail information items exceeds the limit The credential usage parameter is invalid.
Message Text and Symbolic Names 124330 The forgein users password must be supplied. The format of esl file %s is not current version The format of esl update file %s is not current version The ’fullname’ attribute requires a single value. The function does not apply to the object to which it is addressed. The function was aborted by an external force. The gdsdaemon program for Directory ID %d has finished.n The gdsdaemon program for Directory ID %d has started.
OSF DCE Problem Determination Guide The list {%s} contains too few elements. The list {%s} contains too many elements. The login command requires a username argument The login context could not be validated from a keytable. The lower bound must not be greater than the upper bound The major version number is too large; the maximum is %1$lu The ’maxuid’ attribute must be a positive integer. The ’maxuid’ attribute must be an integer. The ’maxuid’ attribute must be less that %d.
Message Text and Symbolic Names 124330 The object is nonexistent or the handle is invalid. The object is not an instance of the encoding class. The object is public and not private. The object ’%s’ does not exist. The OM class of an argument is not supported for this operation. the only allowed rock key has been used The operation could not be performed within the specified time limit. The operation has already completed, The operation requires an acceptor context.
OSF DCE Problem Determination Guide The program could not read the name of the local DSA, errno = %d.n The program could not remove the unused entries from the file %s.n GDS_S_SUP_LOCDSA_ERR The program could not resynchronize DSA processes.n The program could not retrieve the DSA name for the index %d The program could not synchronize DSA processes.n The program could not unlink the file %s, errno = %d.
Message Text and Symbolic Names The resolve command requires the ’-interface’ option with an interface. The RPC-server could not be established because of a RPCThe RPC-server could not be established because of a threads The RPC-server has received an unsupported remote procedure The rule identifier is undefined. The %s call failed with the following error:n%sn The ’%s’ option requires a character string value. The ’%s’ option requires a floating point value. The ’%s’ option requires an integer value.
OSF DCE Problem Determination Guide B−100 The Structure Rule Table contains an incorrectly formatted The supplied cellname is required to be < 255 bytes in length. The supplied cellname is required to have two simple names for an alias and three simple names for a child alias. The supplied cellname would result in a hierarchical cycle. GDS_S_BADSRT_ENTRY The supplied filter type ’%s’ does not take a key. The supplied ownership must either be APPLICATION or GSSAPI.
Message Text and Symbolic Names The token signature was incorrect The token was not created by the remote peer. The token was signed using an unsupported algorithm The token was valid, but a later token has already been received. The token was valid, but an earlier token has not yet been received The token was valid, but is a duplicate of one that has already been received The token was valid, but is severely out of sequence. The trail file is full The ’-tree’ option cannot be combined with other options.
OSF DCE Problem Determination Guide The write to the trail file failed. There are too many options in command line there is no Tcl library at this installation this attribute type does not support multi-valued updates This command can be executed as user ’root’. This command is not allowed from the command line. This object requres a verb to form a command.
Message Text and Symbolic Names 124330 Token wrapper invalid (Framing type != SEQ) Token wrapper invalid (Invalid mech-type length) Token wrapper invalid (Length not 1,2 or 3 bytes) Token wrapper invalid (Mech-type type not OID) Token wrapper was invalid Token wrapper was invalid in gss_accept_sec_ctx too few arguments for math function Too few servers (%ld), need %ld servers too many () Too many ACL types. Too many arguments. too many arguments for math function Too many arguments specified in command.
OSF DCE Problem Determination Guide B−104 Transaction not started before operation Transaction open failed at server TRANSDATA processor number missing TRANSDATA region number missing rpc_s_tx_not_in_transaction rpc_s_tx_open_failed GDS_S_NDS_PROC_ERR GDS_S_NDS_REGION_ERR Transfer syntaxes unsupported Translation routines for [represent_as] type %1$s Translation routines for [transmit_as] type %1$s Transport protocol-ID missing tReplay: Module=[%s] Op=[%s] Seqno=[%s] tried to decrement num_attrs below z
Message Text and Symbolic Names 124330 Types with [represent_as] cannot be nested Types with the [%1$s] attribute cannot be nested Unable to access file %s: status = %ld. Unable to access group file %s (%s). Unable to access passwd file %s (%s).
OSF DCE Problem Determination Guide Unable to establish parent child pipe Unable to establish parent/child pipe: pipe(2) failed: errno = %ld. Unable to establish server bindings Unable to fork child process to execute server: fork(2) failed: errno = %ld. Unable to fork clerk process: errno = %ld.
Message Text and Symbolic Names Unable to read version (%d) file Unable to refresh %s identity .
OSF DCE Problem Determination Guide Unable to write to file %s: status = %ld. unauthorized to call password management server unauthorized to perform this operation Unbalanced braces Unbalanced brackets Unbalanced parentheses Unchangeable attributes entered cds_s_server_write sec_pwd_mgmt_not_authorized sec_attr_unauthorized NIDL_UNBALBRACES NIDL_UNBALBRACKETS NIDL_UNBALPARENS dcp_s_dhd_mod_invalid_attr Undefined attribute type for the object.
Message Text and Symbolic Names 124330 Unknown authentication service Unknown auth_info type. Unknown cached clearinghouse attribute id (%d) encountered.n Unknown clearinghouse counter id (%d) encountered.n Unknown clerk attribute id (%d), continuing display.
OSF DCE Problem Determination Guide Unknown or redundant keyword (Registry Editor/TTY Interface) Unknown or redundant keyword (Registry Editor/TTY Interface) Unknown or unsupported manager type Unknown reject Unknown server attribute id (%d), continuing.n unknown signal Unknown signature algorithm in gss_build_prot_message Unknown sockaddr Unknown superclass acronym %s.
Message Text and Symbolic Names 124330 Unterminated string literal untranslatable binding UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONSn UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONSn NIDL_STRUNTERM dcp_s_rpc_binding_untranslated pwd_imp_err_PAD0 UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONSn UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONSn UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONSn UNUSED MESSAGE, RESERVED FOR FUTURE IMPLEMENTATIONSn UNUSED MESSAGE, RESERVED FOR FUTURE I
OSF DCE Problem Determination Guide User is not member of specified group and org User is not member of specified org User not authorized to perform operation (Registry Edit Kernel) User reset clock using ’clock set’ user "%s" doesn’t exist user_obj ACL entries not allowed in this ACL UUID coding error UUID is badly formatted or out of range (Registry Edit Kernel) Uuid version invalid V1 attributes are incompatible with this type Validated from local override entry, no network Value descriptors not adjacent
Message Text and Symbolic Names Warning: At least one operation must have the [code] attribute Warning: Attribute [%1$s] not supported for target language Warning: Character constant cannot be portable across character sets Warning: Character doesn’t map to target language Warning: Conformant strings not supported in target language Warning: Conformant structures not supported in target language Warning: Duplicate Protocol specification in endpoint list; "%1$s" ignored Warning: error opening %s for priming
OSF DCE Problem Determination Guide B−114 warning: one or more members of the attribute set do not exist on the object Warning: Operation with [cs_tag_rtn] contains no codeset tag parameters Warning: Operation with [decode] has [in]-only parameter %1$s Warning: Operation with [encode] has [out]-only parameter %1$s Warning: Operation with [reflect_deletions] has no [in] or [in,out] full pointers sec_attr_set_member_missing Warning: Pipes not supported for target language Warning: Semantic checking preven
Message Text and Symbolic Names When just setting the epoch, the ’-abruptly’ option is not allowed. Who are you failed dcp_s_clock_set_epoch_no_abrupt Wildcards are not allowed in this context (Registry Edit Kernel) word selector "%s" specified non-existent words working directory name is too long Workspace initialization failed. Would need a new name to resolve conflict.n Would need new UNIX id to resolve conflict.n Write to database failed Wrong boot time Wrong data version number for directory ID %d.
OSF DCE Problem Determination Guide You cannot supercede a preferred cell alias with a normal cell alias the same name. You must be superuser to adjust the clock You must have system privileges to start this server.
Index _____________________________ 124330 Tandem Computers Incorporated Index−1
