OSF DCE Problem Determination Guide

Error Messages and Status Codes
0x1131f332 dcp_s_audfilter_invalid_type
Severity: Varies Component: dcp
Text: The filter type ’%s’ is not valid.
Explanation: The supplied filter type is not valid.
Action: Retype the command with a valid filter type.
0x1131f33c dcp_s_audfilter_modify_need_option
Severity: Varies Component: dcp
Text: At least one of the options ’-add’ or ’-remove’ is required.
Explanation: The user did not specify one of the required options.
Action: Retype the command specifying either -add, -remove or both.
0x1131f333 dcp_s_audfilter_need_key
Severity: Varies Component: dcp
Text: The specified filter type ’%s’ requires a key.
Explanation: A filter type requiring a key was supplied without one.
Action: Retype the command with a valid list of filters and keys.
0x1131f335 dcp_s_audfilter_no_filter
Severity: Varies Component: dcp
Text: No filter found.
Explanation: No filters exist for the supplied filter type and key.
Action: Use a filter type that has filters associated with it.
0x1131f323 dcp_s_aud_id_file_open_fail
Severity: Varies Component: dcp
Text: Could not open daemon identity file ’%s’.
Explanation: The system call to open the daemon identity file on the local filesystem for
reading failed.
Action: Check to see if the specified file exists and has the correct permissions for
reading. The audit daemon creates this file upon startup. Check to make sure that the
audit daemon is running.
0x1131f324 dcp_s_aud_id_file_read_fail
Severity: Varies Component: dcp
Text: Could not read from daemon identity file ’%s’.
124330 Tandem Computers Incorporated 2−129