OSF DCE Problem Determination Guide

Error Messages and Status Codes

0x1131f084 dcp_s_rpc_member_or_annot

Severity: Varies Component: dcp

Text: The ’-member’ can only be used with the ’-interface’ option.

Explanation: The -member option must be used with the -interface option, and cannot

be used with the -default, -priority,or -annotation options.

Action: Retype the command with proper options. See the documentation on the

rpcproﬁle remove command for the correct options.

0x1131f07f dcp_s_rpc_no_binding

Severity: Varies Component: dcp

Text: No string binding entered

Explanation: If an interface id is entered, then a string binding must be entered to be

exported for that interface.

Action: Retype the command with a string binding using the -binding option.

0x1131f07a dcp_s_rpc_no_binding_found

Severity: Varies Component: dcp

Text: No matching binding information found.

Explanation: No binding information could be found. Either none was found in the RPC

Entry, RPC Group, or RPC Proﬁle, or none was found which matched criteria speciﬁed by

options.

Action: Either the name given was incorrect, or the options given were incorrect, or the

object does not contain any matching binding information. If either of the ﬁrst two is the

case, retype the command correcting any incorrect values.

0x1131f074 dcp_s_rpc_no_entry_name

Severity: Varies Component: dcp

Text: No RPC Entry name given

Explanation: No RPC Entry name was given to the command.

Action: Retype the command with an RPC Entry name.

0x1131f075 dcp_s_rpc_no_group_name

Severity: Varies Component: dcp

Text: No RPC Group name given

Explanation: No RPC group name was given to the command.

Action: Retype the command with an RPC Group name.

124330 Tandem Computers Incorporated 2−173