OSF DCE Problem Determination Guide

Error Messages and Status Codes
Action: Use only BSD signals.
0x1131f039 dcp_s_signal_takes_no_cmd
Severity: Varies Component: dcp
Text: A command may not be specified for the ’%s’ action.
Explanation: The specified action does not take a command.
Action: Retype the command with the correct arguments.
0x1131f037 dcp_s_signal_trap_req_cmd
Severity: Varies Component: dcp
Text: A command is required for trapping signals.
Explanation: The signal trap command was not given a command to execute.
Action: Retype the command with a command to execute.
0x1131f35f dcp_s_sr_bad_if_attr
Severity: Varies Component: dcp
Text: The interface list must contain pairs of entries {uuid_string
major_version.minor_version}
Explanation: User entered incorrect interface syntax
Action: reenter command with correct interface attribute
0x1131f35b dcp_s_sr_missing_req_opt
Severity: Varies Component: dcp
Text: Required option ’%s’ not entered.
Explanation: Required option to the command were not entered.
Action: Retype the command with correct arguments and options.
0x1131f35c dcp_s_sr_obj_not_found
Severity: Varies Component: dcp
Text: The object ’%s’ does not exist.
Explanation: A matching object could not be found. This may only be informational,
depending on whether or not a match was expected.
Action: Retype the command with possibly correct object name.
0x1131f35d dcp_s_sr_unknown_serv_flag
Severity: Varies Component: dcp
124330 Tandem Computers Incorporated 2−177