OSF DCE Problem Determination Guide

OSF DCE Problem Determination Guide
Explanation: The rpc_if_inq_id() function returned a DCE status code indicating failure
Action: Determine cause of failure and re-run the command
0x115ca0ab dts_s_invalid_attr_value
Severity: Warning Component: dts / dts_s_error
Text: An invalid value (%s) was entered for the attribute %s\n
Explanation: An invalid or out-of-range value was entered for the specified attribute
Action: Fix and restart the dtsd
0x115ca0a9 dts_s_invalid_type
Severity: Warning Component: dts / dts_s_error
Text: Unknown attribute type found in internal table\n
Explanation: This is a dtsd internal error, and should never happen
Action: Report to your DCE provider
0x115ca006 dts_s_is_started
Severity: Varies Component: dts
Text: Time service has already been started
Explanation: An attempt was made to enable a DTS entity that is already functioning
Action: None required.
0x115ca047 dts_s_local_nointersect
Severity: Warning Component: dts / dts_s_events
Text: Local server %s returned time %s which does not intersect computed time %s
Explanation: During synchronization, the time-provider (TP) server detected that the
time for a local server does not intersect with the TP.
Action: None required.
0x115ca086 dts_s_mgmt_srvr_listening
Severity: Error Component: dts / dts_s_error
Text: Error in rpc_mgmt_is_server_listing() call: %s
Explanation: The RPC call rpc_mgmt_is_server_listening unexpectedly failed
Action: This is an RPC error. Check RPC status code for more info
0x115ca0a5 dts_s_mgmt_srvr_listen_timeout
Severity: Error Component: dts / dts_s_error
2 208 Tandem Computers Incorporated 124330