OSF DCE Problem Determination Guide

Error Messages and Status Codes

0x115ca001 dts_s_normal

Severity: Varies Component: dts

Text: Successful completion

Explanation: Operation performed

Action: None required.

0x115ca00b dts_s_not_created

Severity: Varies Component: dts

Text: Time service has not been created

Explanation: An attempt was made to issue the dts activate command for a DTS entity;

however, the entity has not been created.

Action: Create the DTS entity and then issue the dts activate command.

0x115ca00c dts_s_not_enabled

Severity: Varies Component: dts

Text: Time service has not been enabled

Explanation: An attempt was made to issue a command for a DTS entity that is not

enabled.

Action: Issue the dts activate command for the DTS entity and retry the desired

operation

0x115ca019 dts_s_not_global_server

Severity: Varies Component: dts

Text: Not a global time server

Explanation: An attempt was made to issue the dts conﬁgure command to remove a

global server. The server, however, was not a global server.

Action: To determine which global servers are known to the node, issue the dts show

command. You can then use dts conﬁgure to remove those you no longer want.

0x115ca00d dts_s_no_time_updated

Severity: Varies Component: dts

Text: New time not contained in current time interval

Explanation: An attempt was made to adjust the system clock to a new time; however,

the new time would be less accurate than the current time.

Action: Retry the operation making sure that the new time and inaccuracy you specify

forms a smaller interval than the current system interval. That is, the new setting must be

more accurate than the current setting. The minimum inaccuracy acheivable with the

update command is approximately 1 second. Any lower setting is not recommended.

124330 Tandem Computers Incorporated 2−211