OSF DCE Problem Determination Guide

Error Messages and Status Codes
0x1260afa0 GST_INV_DEBUG_LEVEL
Severity: Fatal Component: gds / GDS_S_STEP
Text: Invalid debug level %ld.
Explanation: The evaluation tool gstep was called with an invalid debug level.
Action: Call gstep with a correct debug level in the range from 0 to 9.
0x1260afa3 GST_LOGCLOSE_ERR
Severity: Fatal Component: gds / GDS_S_STEP
Text: The specified logfile cannot be closed, error status: 0x%lx.
Explanation: The evaluation tool gstep could not close the specified logfile.
Action: This problem should not occur and cannot be corrected by a user or system
administrator. Evaluate error status for the reason. Report the problem to the
responsible software engineer.
0x1260afa2 GST_LOGOPEN_ERR
Severity: Fatal Component: gds / GDS_S_STEP
Text: The specified logfile cannot be opened, error status: 0x%lx.
Explanation: The evaluation tool gstep could not open the specified logfile.
Action: Evaluate error status for the reason. Values are found in dce_svc.h. Depending
on the reason, possible actions are:
Change the access mode of the file.
Create the file.
Report the problem to the responsible software engineer.
0x1260afa7 GST_LOGREAD_ERR
Severity: Warning Component: gds / GDS_S_STEP
Text: A logged data element could not be read from the logfile. Error Status: 0x%lx.
Explanation: The logfile contains inconsistent data.
Action: This problem should not occur and cannot be corrected by a user or system
administrator. Report the problem to the responsible software engineer.
0x1260afa1 GST_NO_LOGFILE
Severity: Fatal Component: gds / GDS_S_STEP
Text: Logfile name is missing.
Explanation: The evaluation tool gstep was called without a logfile name parameter.
Action: Specify the name of the logfile when calling the evaluation tool.
124330 Tandem Computers Incorporated 2−387