OSF DCE Problem Determination Guide

Error Messages and Status Codes
Action: Ensure that the string array is properly formed and that each of the attribute value
strings are less than 1024 and retry the operation.
0x1712217d sec_authn_s_bad_seal
Severity: Varies Component: sec
Text: integrity error: EPAC seal mismatch.
Explanation: Data corruption, or an attacker asserting credentials that don’t match the
credentials that were actually granted. If error is reproducible, then it’s most likely a
defect in DCE.
Action: Notify support personnel, if reproducible.
0x1712217b sec_authn_s_missing_epac
Severity: Varies Component: sec
Text: EPAC missing after authenticator
Explanation: Improperly formed RPC authentication protocol message, probably due to
a defect in DCE.
Action: Notify support personnel.
0x1712217c sec_authn_s_no_seal
Severity: Varies Component: sec
Text: can’t find appropriate seal for EPAC
Explanation: Improperly formed RPC authentication protocol message, probably due to
a defect in DCE.
Action: Notify support personnel.
0x17122f60 sec_buf_too_small
Severity: Varies Component: sec
Text: Buffer too small
Explanation: The buffer size is smaller than the amount of data which needs to be copied
into the buffer. This is an internal error.
Action: Log a defect.
0x17122dc8 sec_crdb_at_char_in_cellname
Severity: Fatal Component: sec / sec_s_rs_create_db
Text: Cell name %s cannot contain the @ character
Explanation: ?
Action: ?
124330 Tandem Computers Incorporated 2−561