OSI/TS Configuration and Management Manual

Performing Monitoring and Troubleshooting Guide
OSI/TS Configuration and Management Manual—424831-001
4-33
SCF Commands
STATS SERVICE $LAM2.#L18023
The following screen is returned for this example command
Since the OSI IP is contained within the TSP process, traces and statistics on IP-related
problems must be gathered by the TSP process.
The following command displays the number and types of IPPDUs sent and received.
This command also returns the number of frames that were discarded, checksum errors,
and so on:
TLAM Stats SERVICE $LAM2.#L18023
Sample Time..... 10 Oct 1991, 12:05:08.244
Reset Time...... 10 Oct 1991, 0:00:46.734
802.3 (CSMA/CD) STATS
FramesDiscarded......... 0D LackOfResourceErrors. 0D
ReceiveOverruns......... 0D TransmitUnderruns.... 0D
FramesTransmittedOK..... 6056D FramesReceivedOK..... 17836D
OctetsTransmittedOK..... 557100D OctetsReceivedOK..... 1165725D
FCSErrors............... 0D AlignmentErrors...... 0D
DeferredTransmisssions.. 1D
TotalCollisionFrames.... 0D ExcessiveCollisions.. 0D
TotalCollisions......... 0D
LossofCTS............... 0D LossofCD............. 0D
.i.STATS command examples:STATS PORT display
The following command displays useful information about the aggregate
SDUs:
STATS PORT $LAM1.*
The following screen is returned for this example:
TLAM Stats PORT $LAM1.#TSP1FE
Sample Time..... 10 Oct 1991, 11:54:51.581
Reset Time...... 10 Oct 1991, 10:55:50.116
Delivered AG SDUs........ 85D
Undelivered AG SDUs...... 0D
Sent AG SDUs............. 793D
File System Request
Control...0D Read....... 88D Write..... 793D
Writeread.0D SetMode.... 0D GetMode... 0D
Open......2D Close...... 0D ProcInfo.. 0D
CPUDown...0D CPUUp...... 0D Change.... 0D
DevInfo...0D SubdevInfo. 3D SubdevName 0D
GetParam..0D SetParam... 0D Other..... 0D