OSI/TS Configuration and Management Manual

NonStop Kernel File-System Interface
OSI/TS Configuration and Management Manual—424831-001
7-17
SETPARAM 10
The following list describes the components of variable-length records.
In the case of remote addresses (record types 2 and 7), the meaning of the data
is dependent upon two factors: whether the subdevice is configured for a
remote address (SCF attributes REMOTENSAP or REMOTETSEL), and whether
a Transport Layer connection has been established.
Figure 7-5. Subdevice Status Block Variable-Length Record
Record Length A one-octet field that indicates length of record (excluding
this field) in octets.
Record Type A one-octet code that indicates type of record. The codes
for the record types are shown in Table 7-5
.
Data A variable-length field that contains the data for that
variable-length parameter.
Type Code Record Type
1 Local TSEL
2 Remote TSEL
3 Receive-security string
4 Send-security string
5 User data for CR-TPDUs
6 Local NSAP address
7 Remote NSAP address
8 User data from last received DR-TPDU
705CDT .CDD
•
•
•
Octet n
Data
Record Length
Record Type
Octet n + 2
Through
Octet n + Length
Octet n + 1
•
•
•
Record Length