OSI/TS Configuration and Management Manual

X.25 Status Code Tables
OSI/TS Configuration and Management Manual—424831-001
B-5
Diagnostic Field Codes
for INCOMING CALL (or for
DTE timer expired for CALL
REQUEST)
0 0 1 1 0 0 0 1 49 C
for CLEAR INDICATION (or
for DTE timer expired or
retransmission count surpassed
for CLEAR REQUEST)
0 0 1 1 0 0 1 0 50 D, C
for RESET INDICATION (or
for DTE timer expired or
retransmission count surpassed
for RESET REQUEST)
0 0 1 1 0 0 1 1 51 D, C, Re
for RESTART INDICATION (or
for DTE timer expired or
retransmission count surpassed
for RESTART REQUEST)
0 0 1 1 0 1 0 0 52 D, Rr, C, Re
. . . . . . . .
0 0 1 1 1 1 1 1 63
Call setup, call clearing, or
registration problem
0 1 0 0 0 0 0 0 64 C, Rg
facility/registration code not
allowed
0 1 0 0 0 0 0 1 65 C, Rg
facility parameter not allowed 0 1 0 0 0 0 1 0 66 C, Rg
invalid called address 0 1 0 0 0 0 1 1 67 C
invalid calling address 0 1 0 0 0 1 0 0 68 C
invalid facility/registration
length
0 1 0 0 0 1 0 1 69 C, Rg
incoming call barred 0 1 0 0 0 1 1 0 70 C
no logical channel available 0 1 0 0 0 1 1 1 71 C
call collision 0 1 0 0 1 0 0 0 72 C
duplicate facility requested 0 1 0 0 1 0 0 1 73 C, Rg
nonzero address length 0 1 0 0 1 0 1 0 74 C, Rg
nonzero facility length 0 1 0 0 1 0 1 1 75 C
facility not provided when
expected
0 1 0 0 1 1 0 0 76 C, Rg
invalid CCITT-specified DTE
facility
0 1 0 0 1 1 0 1 77 C
. . . . . . . .
0 1 0 0 1 1 1 1 79
Table B-3. Diagnostic Field Codes (Page 1 of 6)
Diagnostic
Bits
8 7 6 5 4 3 2 1
Decimal
Value
Applicable Packets
(Note 1)