OSI/TS Configuration and Management Manual

Index
OSI/TS Configuration and Management Manual—424831-001
Index-2
C
C
C example program
file-transfer responder C-9
Call packet addresses 2-7
Call request packet trace examples 4-24, 4-
29, 4-31
Called address
description 5-11
, 5-12
parameter 5-2
Called TSEL 7-30
Calling address
description 5-11
, 5-12
parameter 5-2
Calling TSEL 7-30
CCITT
X25AM support of 1-7
X.25 standards 1-2
CC-TPDU
description 6-1
parameters when initiating 6-6, 6-7
parameters when responding 6-8, 6-9
successful connection initiation 6-6
trace example 4-22
user data in 7-22, 7-25, 7-31
Changing subdevice parameters 7-11
CHECK command
comparison to STATUS command 4-7
examples
CHECK SU display 4-6
, 4-28
command file to collect diagnostic
information 4-41
commands 4-9
using 4-6, 4-7
wild card option 4-8
Checksum
field in subdevice status block 7-16
CHECKSUM attribute
effect on performance 3-14
service parameter 7-6
subdevice parameter 7-3
CHECKTSEL attribute 7-6
Circuit disconnect reasons, table of B-1
CIRCUITS attribute, effect on
performance 3-13
CLASS attribute
effect on performance 3-13
service parameter 7-6
subdevice parameter 7-3
Clear cause codes, table of B-2
Clear confirm packet trace examples 4-30
Clear packet trace examples 4-30
CLOSE procedure
examples C-1
, C-4
procedure calls, table of 1-11
when to use 7-39
Closed user group parameters 7-5
Closing a subdevice 7-39
Command file examples
collecting diagnostic information for 4-
41
LAN, general 3-26, 3-28
LAN, with ES-IS protocol 3-28
LAN, with IP null 3-30, 3-31
large applications 3-31
resetting all statistics counters for 4-37
X.25, generic 3-22, 3-25
X.25, with SNDCF 3-25
Communications lines, starting 3-7
Completing connection requests 7-32
Completion codes, data transfer 7-36
Completion codes, table of 7-32
Completions, out of sequence 7-21
Concatenation of TPDUs 6-11
Configuration
capacity 3-10
changing interactively 1-12
determining current 4-3
effect of other attributes 3-17