OSI/TS Configuration and Management Manual

Index
OSI/TS Configuration and Management Manual—424831-001
Index-9
N
factors in using multiplexing 5-13
service attribute 7-7
subdevice attribute 7-3
Multiplexing
connections 5-12
, 5-13
description 2-17
factors for 5-13
parameter 7-3
passive 5-14
protocols 5-4
setting via SETPARAM 7-19
N
Naming
OSI/TS subdevices 7-1
TLAM ports 3-6
TSP processes 3-20
wild card option with CHECK 4-8
X25AM subdevices 3-4
Negotiation of services
accept parameters 7-31
additional options 7-30
general 6-2
length field 7-28
parameters, table of 7-28
WRITEREAD buffer 7-28
Negotiation parameters, PTrace vs SCF 4-
20
NETTYPE attribute 7-3, 7-7
Network
configuration and management
tools 1-11
disconnect primitive N-DISC 6-7
reset primitive 6-7
type parameter 7-3, 7-7
Network addressing
authorities 2-3
domains 2-4, 2-6
practical suggestions for 2-16
Network expedited option field 7-16
Network Layer
encoding NSAP addresses 2-12
installing TLAM 3-6, 3-7
installing X25AM 3-3, 3-5
installing, overview 3-2
standards 1-1
starting lines 3-7
support for 1-7, 1-9
NEWPROCESS procedure 1-12
NEWPROCESS procedure call 3-19
Nonmultiplexed subdevices 5-13
NonStop operations 1-13
Nowait calls 1-3
Nowait I/O parameter 7-11
Nowait mode 3-20
NPDU 2-11
NR-TPDU 6-13
NSAP addresses
address components 2-7
address sharing 5-10, 5-11
AFI component 2-8
converting for NPDUs 2-11, 2-12
description 2-3, 5-9
DSP component 2-10, 2-11
encoding by Network Layer 2-12
examples 2-13, 2-16
IDI component 2-9
network addressing authorities 2-3
network addressing domains 2-4, 2-6
nonstandard 2-13
practical suggestions for 2-16
X.25 addressing 2-6, 2-7
NSAP parameters, local and remote 7-3
NSP processes
architecture 1-5
multiple, supported by TSP process 3-2
starting lines 3-7