OVNM 5.3 - Operations Agent for NonStop ObjectMap Guide

ObjectMAP – The Understanding 27
3-2-2 Group View
Figure 3-5 ObjectMAP Group View
Group View is significant when the user needs to monitor objects other than the predefined object types. The
objects, which are added to user defined groups and subgroups to meet specific business requirements, can only
be viewed when ObjectMAP is seen in the Group View mode. The user can select to view the objects in a
group-wise classification by selecting the Group View icon on the Toolbar. The hierarchy followed in the Group
View mode is – Group/Sub-group/Node/Subsystem/Object-Type/Threshold/Objects.
If no groups or sub-groups have been defined, then the name of the subsystem is taken as the group and the
object-type is used as the sub-group name by default.
For details on how to classify objects into user-defined groups and sub-groups refer to Group & Sub-Group
Management of Objects.
NOTE: HP recommends Group View be configured only for the group and sub-group level. This will allow the
user to monitor all objects, irrespective of the node they are tied to.
ObjectMAP – The Understanding