Pathway/iTS System Management Manual (H06.03, J06.03+)

HP NonStop Pathway/iTS System Management Manual—426748-005
xi
What’s New in This Manual
Manual Information
HP NonStop Pathway/iTS System Management Manual
Abstract
This manual describes the management interface to the HP NonStop™ Pathway/iTS
product; it is intended for system managers and operators. It provides instructions and
guidelines for configuring and controlling the Pathway/iTS objects (those related to
terminal control processes (TCPs), terminals, and intelligent devices) and for
monitoring the status and performance of those objects. It also provides the syntax and
complete descriptions of all PATHCOM commands for Pathway/iTS objects and cause,
effect, and recovery information for all TCP error messages.
Product Version
Pathway/iTS 1.1
Supported Release Version Updates (RVUs)
This publication supports J06.03 and all subsequent J-series RVUs and H06.03 and all
subsequent H-series RVUs, until otherwise indicated by its replacement publications.
Document History
New and Changed Information
Changes in the H06.18/J06.07 manual:
•
Added a note for CONTROL TERM commands below:
°
Figure 7-1 PATHCOM Commands and Object States on page 7-2
°
Table 7-1 PATHCOM Commands on page 7-4
•
Updated CONTROL command under:
°
Table 7-1 PATHCOM Commands on page 7-3
Part Number Published
426748-005 May 2009
Part Number Product Version Published
426748-001 Pathway/iTS 1.0 October 2000
426748-002 Pathway/iTS 1.0 February 2006
426748-003 Pathway/iTS 1.1 May 2007
426748-004 Pathway/iTS 1.1 May 2008
426748-005 Pathway/iTS 1.1 May 2009