Pathway/iTS System Management Manual (H06.03, J06.03+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-005
10-41
STOP TERM Command
Consideration
•
This command is usually issued only to configured TERM objects; temporary
TERM objects created in response to a RUN PROGRAM command are usually
terminated automatically by the PATHMON process when the task has completed.
•
The coupling information is lost after issuing a STOP command.
Examples
The following commands stop the specified TERM objects:
STOP TERM-1
STOP TERM TERM-2
STOP TERM(TERM-3, TERM-4)
The following command stops all TERM objects in the RUNNING state under the
control of the TCP named TCPA:
STOP TERM *, STATE RUNNING, TCP TCPA
The following command stops all TERM objects in the PATHMON environment:
STOP TERM *