Pathway/iTS System Management Manual (H06.03, J06.03+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-005
10-43
Wild Card Support for TERM Commands
This command suspends only those TERM objects in the RUNNING state. If you
specify any other state, the system redisplays the command prompt; it does not
display any output or generate an error message.
You can substitute SEL for STATE.
TCP tcp-name
suspends all TERM objects controlled by the specified TCP.
Examples
The following commands suspend the specified TERM objects:
SUSPEND TERM TERM-1
SUSPEND (TERM-2, TERM-3)
The following command suspends all TERM objects in the RUNNING state under the
control of the TCP named TCPA:
SUSPEND TERM *, STATE RUNNING, TCP TCPA
The following command immediately suspends all TERM objects in the PATHMON
environment:
SUSPEND TERM * !
Wild Card Support for TERM Commands
The following TERM commands in PATHCOM allow management and operation of all
TERM objects configured under a PATHMON environment by using the wild card "*":
•
ABORT
•
INFO
•
RESUME
•
START
•
STATS
•
STATUS
•
STOP
•
SUSPEND
All these commands can be applied to a subset of configured TERM objects.
Note. The above mentioned wild card support is applicable only to TS/MP 2.3 PATHMON and
PATHCOM. For more information on TS/MP 2.3, see the TS/MP Release Supplement Manual.