pTAL Reference Manual (H06.03+)

Index
HP pTAL Reference Manual—523746-005
Index-14
N
MISALIGNLOG attribute (SCF)
misalignment handling and 4-3
misalignment tracing facility and 4-1
Misalignment
See Address misalignment
Mnemonics, listing 17-39
Modular programming 1-6
Most significant byte 3-1
Move statement 12-28/12-33
MOVEANDCXSUMBYTES
routine 15-65/15-66
MOVENONDUP routine 15-67/15-68
Multiplication operator
signed (*)
description of 2-6
in arithmetic expression 5-5
operand types for 5-6
precedence of 5-3
unsigned (’*’)
description of 2-6
operand types for 5-8
precedence of 5-3
result types for 5-9
with INT(32) operands 5-11
N
NAME declarations 16-13
Named toggles 17-6
Naming compilation units 16-13
NATIVEATOMICMISALIGN attribute
(SCF) 4-3
Nesting condition codes 13-12/13-14
Next address
in move statement 12-28
in RSCAN statement 12-40
in SCAN statement 12-40
nld utility 18-7
Node names B-2
NOname directive
See name directive
Nonatomic access 4-3
Nonatomic operations 15-11, 15-17/15-22
Nonextended addresses 5-12
Nonlocal GOTO statement 12-24
Nonreserved keywords 2-3/2-4
NonStop EpTAL 18-2
NonStop operating systems 1-2
NonStop pTAL 18-2
NonStop Series
See TNS architecture
NonStop Series/Itanium
See TNS/E architecture
NonStop Series/RISC
See TNS/R architecture
Nonstring arrays 8-9
NOOVERFLOW_TRAPS procedure
attribute
description of 13-2
in procedure 14-5, 14-8
in subprocedure 14-19, 14-20
Not equal operator
signed (<>)
in conditional expression 5-18
operand types for 5-18
precedence of 5-4
without operands 5-19
unsigned (’<>’)
in conditional expression 5-18
operand types for 5-19
precedence of 5-4
with INT(32) operands 5-10
without operands 5-19
NOT operator
description of 5-17
condition codes and 5-18
in conditional expression 5-15
operand types for 5-17
precedence of 5-4
truth table for 5-15
Null statement 12-2