RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

errnum
is a file-system error number.
procname
is the name of an extractor process.
Cause The RDF extractor is no longer responding, and it might be stopped.
Effect The lockstep gateway stops.
Recovery Determine why the RDF subsystem stopped, correct the problem, and then restart
the subsystem.
5
The lockstep gateway received error errnum from the RDF extractor
procname.
errnum
is a file-system error number.
procname
is the name of the process that is in use.
Cause When the gateway attempted to obtain the name of the RDF lockstep file from the
extractor, it received the indicated error. This condition can happen if the RDF subsystem with
the specified extractor was not configured for lockstep, or the version of your RDF subsystem
does not support lockstep operations.
Effect The lockstep gateway stops.
Recovery If you want to perform RDF lockstep operations, you must be sure you have the
correct version of the RDF product, and you must be sure you have configured your RDF
subsystem for lockstep operation.
6
Create error errnum on the RDF lockstep file filename.
errnum
is a file-system error number.
filename
is the name of a lockstep file.
Cause When the gateway attempted to create the specified lockstep file, it received the
specified error.
Effect The lockstep gateway stops.
Recovery Correct the error condition and restart the lockstep gateway.
7
Open error errnum on filename.
errnum
is a file-system error number.
filename
is the name of a lockstep file.
Cause The lockstep gateway received the specified error while attempting to open the
specified lockstep file.
Effect The lockstep gateway stops.
Recovery Correct the error condition and restart the lockstep gateway.
Lockstep Gateway Event Messages 315