RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

MAXMINDefault Value(s)Parameter
n.a.n.a.offRECEIVER
FASTUPDATEMODE
1500:1TRIGGER CPUS
19910150TRIGGER PRIORITY
n.a.n.a.WAITTRIGGER WAIT
n.a.n.a.WAITTRIGGER NOWAIT
1500:1PURGER CPUS
19910165PURGER PRIORITY
14403060PURGER PURGETIME
500022PURGER RETAINCOUNT
1500VOLUME ATINDEX
1500:1VOLUME CPUS
19910160VOLUME PRIORITY
n.a.n.a.$SYSTEMVOLUME
UPDATEVOLUME
n.a.n.a.RECEIVER RDFVOLUMEVOLUME IMAGEVOLUME
n.a.n.a.noneVOLUME MAPFILE
n.a.n.a.noneVOLUME MAPLOG
Sample Configuration File
The following is a sample OBEY command file for configuring the RDF subsystem for the first
time.
Comment lines begin with the | symbol and are ignored by RDFCOM.
| ***
| *** Remove all information from the current RDF configuration
| *** file.
| ***
INITIALIZE RDF, BACKUPSYSTEM \LONDON, SUFFIX 1!
| ***
| *** Set the RDF Global Parameters| ***
SET RDF SOFTWARELOC $SYSTEM.RDF
SET RDF REPLICATEPURGE ON
SET RDF NETWORK OFF
| ***
| *** Set the monitor parameters.
| ***
SET EXTRACTOR CPUS 2:1
SET EXTRACTOR PRIORITY 165
SET EXTRACTOR PROCESS $EXT
| ***
| *** Add the extractor parameters to the
| *** RDF configuration file.
| ***
ADD EXTRACTOR
| ***
| *** Set the receiver parameters.
| *** $REC is the name of the receiver process.
| ***
360 Additional Reference Information