RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

768
Phase one part 3 database synchronization complete
Cause The third part of phase one of a database synchronization operation has completed.
Effect The extractor continues with phase two.
Recovery This is an informational message; no recovery is required.
769
Rolling over to filename
filename
is the name of the next image file in the sequence.
Cause The reporting process has filled the current image file and is ready to begin writing
to the next file in the sequence. This next file is named in filename .
Effect The reporting process rolls over into the specified image file.
Recovery This is an informational message; no recovery is required.
770
RDF RDFNET process started
Cause The RDFNET process has successfully completed its initialization.
Effect The process starts its task of performing synchronized transactions on each of the
primary nodes in the RDF network of RDF primary systems.
Recovery This is an informational message; no recovery is required.
771
Remote RDF receiver started
Cause The receiver has successfully completed its initialization.
Effect The receiver is prepared to receive data from the extractor.
Recovery This is an informational message; no recovery is required.
772
TMF is not running on the remote system
Cause The receiver has determined that TMF is not started on the RDF backup system.
Effect The receiver abends.
Recovery Start TMF on the backup system and then restart RDF.
773
Remote RDF updater started vol => vol
vol => vol
are the volume on the primary node that the updater is protecting and the corresponding
volume to which it is writing on the backup node.
Cause The updater has successfully completed its initialization. The message includes the
audited volume name and its corresponding update volume name.
Effect The updater is prepared to apply updates to the database on the backup node.
Recovery This is an informational message; no recovery is required.
774
Local RDF extractor started
Cause The extractor has successfully completed its initialization.
Effect The extractor will begin reading TMF audit data and transmitting it to the receiver.
382 Messages