RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

805
WRITEUPDATE error error on file-name
error
is the file-system error number that identifies the specific error.
filename
is the name of the file on which the error occurred.
Cause The RDFNET process has encountered the specified error on the specified file.
Effect The RDFNET process aborts its current transaction, posts a timer, and waits for that
timer to expire before attempting a new transaction.
Recovery You should determine the cause of the error and then take appropriate corrective
action.
806
RDF RDFNET process Shutdown Complete
Cause The RDFNET process has terminated normal processing as the result of a STOP TMF
or STOP RDF command.
Effect Normal RDF shutdown processing continues.
Recovery This is an informational message; no recovery is required.
807
Update mode has been set ON
Cause The operator issued a START UPDATE command.
Effect RDF starts updating the backup database.
Recovery This is an informational message; no recovery is required.
808
Update mode has been set OFF
Cause The operator issued a STOP UPDATE command.
Effect RDF stops updating the backup database.
Recovery This is an informational message; no recovery is required.
809
Shutting down in response to STOP RDF
Cause The operator issued a STOP RDF command.
Effect The RDF process stops normally.
Recovery This is an informational message; no recovery is required.
810
Shutting down in response to STOP TMF, timestamp timestamp
timestamp
is the time of the shutdown.
Cause The operator issued a TMFCOM STOP TMF command at the primary node.
timestamp is the time of that shutdown.
Effect The RDF process stops normally.
Recovery This is an informational message; no recovery is required.
811
RDF TAKEOVER initiated
RDF Messages 389