RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

Recovery This is an informational message. You must examine the event log to determine
why the process is restarting and if any recovery action is required.
882
RDF process transaction unilaterally aborted
Cause The named RDF process' current transaction has been aborted by TMF and the disk
process.
Effect The process restarts.
Recovery This is an informational message. You must examine the event log to determine
why the process is restarting and if any recovery action is required.
883
Physical volumes in pool exceed the limit of 15
Cause The updater is configured to a virtual SMF disk that consists of more than 15 physical
disks. This configuration is not supported by the RDF product.
Effect The updater abends and the RDF subsystem shuts down.
Recovery Reset your RDF configuration and/or your SMF configuration so that the updaters
are either assigned to physical volumes, or your SMF virtual disks map to 15 or fewer physical
volumes.
884
The RDFNET process is restarting
Cause The RDFNET process encountered a condition that caused it to restart.
Effect The process restarts and resumes normal processing.
Recovery Examine the preceding events for this process to try to determine why the process
is restarting. Take corrective action if necessary.
885
Updater phase one takeover processing complete
Cause The updater has completed the local undo processing phase.
Effect The updater is ready to commence the next phase of undo processing.
Recovery This is an informational message; no recovery is required.
886
Updater phase three takeover processing complete
Cause The updater has reached the end of network undo takeover processing for an RDF
network environment.
Effect The updater is ready to complete takeover processing.
Recovery This is an informational message; no recovery is required.
887
Process trapped. Signal sig-num
sig-num
is the signal number associated with the trap.
Cause The process reporting the event experienced an internal error and has trapped. The
message indicates the signal number associated with the trap.
Effect The process abends.
Recovery This is an internal error. Preserve the saveabend file created and report the incident
to your service provider.
404 Messages