RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

Cause The network master network record does not have the have the specified backup
system name for the local RDF subsystem.
Effect Validation fails.
Recovery You must reconfigure your network master.
BACKUPSYSTEM is Not Defined
Cause The RDF configuration file is invalid.
Effect The RDF configuration record was not added.
Recovery Enter a SET RDF command, using the BACKUPSYSTEM parameter to identify the
backup system. Then, enter an ADD RDF command to add this system to the configuration.
BACKUPSYSTEM \node is Unavailable
node
is the name of the backup node that was unavailable.
Cause Either the START RDF command failed because the backup node was unavailable,
or the RDF configuration file is invalid.
Effect The command or requested operation fails.
Recovery Examine the RDF configuration file, and correct it if necessary. Otherwise, reenter
the START RDF command when the backup node becomes available.
Broadcast ALTER Failed: error# on component
error#
is the file-system error number that identifies the specific error.
component
is the name of the RDF component for which the ALTER command failed.
Cause An ALTER command failed for the specified components.
Effect The command fails.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the command that encountered
the error. Otherwise, see your system manager.
Cannot delete NETWORK PNETTXVOLUME volume
volume
is the name of an RDF data volume.
Cause You have attempted to delete an updater that protects the specified PNETTXVOLUME.
This is not allowed because it would break your RDF network.
Effect Delete fails.
Recovery If you really must delete the updater, you will then need to reconfigure your
network master and possibly your local configuration.
Configuration Validation Aborted
Cause The RDF configuration file is invalid.
Effect The VALIDATE CONFIGURATION or START RDF command that checked the
configuration file fails.
Recovery Check and correct the configuration file. Then reenter the VALIDATE
CONFIGURATION or START RDF command.
Couldn't create or clear the BACKUPSYSTEM CONTEXT (error#)
error#
is the file-system error number that identifies the specific error.
416 Messages