RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

Cause You tried to add a secondary image trail on the volume volume-name, but an image
trail has already been added for this volume.
Effect The command fails.
Recovery Select a different volume for the secondary image trail.
IMAGETRAIL volume-name is not used by any updater
volume-name
is the name of the image trail.
Cause While validating your configuration, RDFCOM determined that the image trail on
the volume volume-name is not referenced by any updater processes.
Effect The validation operation aborts.
Recovery Delete this image trail
IMAGETRAIL volume-name record not found; DELETE aborted
volume-name
is the name of the secondary image trail that was specified in the command.
Cause You tried to delete a secondary image trail that does not exist.
Effect The command fails.
Recovery Select a different secondary image trail to delete, or select another command.
IMAGETRAIL VOLUME volume-name does NOT exist
volume-name
is the name of the volume.
Cause While validating your configuration, RDFCOM determined that the volume for this
image trail does not exist on the backup node.
Effect The validation operation aborts.
Recovery Delete this image trail volume and all updaters that use it.
IMAGETRAIL VOLUME volume-name is not a disk volume
volume-name
is the name of the volume.
Cause While validating your configuration, RDFCOM determined that volume-name does
not refer to a disk device on the backup node.
Effect The validation operation aborts.
Recovery Delete this image trail volume and all updaters that refer to it.
IMAGEVOLUME volume-name is not a legal volume name
volume-name
is the name of the volume.
Cause The SET VOLUME IMAGEVOLUME command specified an invalid volume name.
Effect The command fails.
Recovery Reenter the command, using a correct volume name.
Inconsistent network options are not allowed
Cause You have attempted to add the RDF configuration record with the RDF NetworkMaster
attribute on but the Network attribute off.
Effect The configuration command fails.
Recovery You must determine whether you are in an RDF network or not.
Initialization point for timestamp has been found
RDFCOM Messages 427