RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

timestamp
is an INITTIME timestamp specified previously by an operator in an RDFCOM INITIALIZE
RDF command.
Cause You are attempting to initialize RDF to a timestamp that is earlier than the current
time, and database synchronization is not involved. A record whose timestamp is less than
timestamp has been found.
Effect The RDFCOM INITIALIZE RDF command continues.
Recovery This is an informational message; no recovery is required.
Initialization timestamp is timestamp
timestamp
is an INITTIME timestamp specified previously by an operator in an RDFCOM INITIALIZE
RDF command.
Cause You are attempting to initialize RDF to a timestamp that is earlier than the current
time, and database synchronization is not involved. A record whose timestamp is less than
timestamp has been found, and timestamp has been stored in the RDF configuration record.
Effect The RDFCOM INITIALIZE RDF command continues.
Recovery This is an informational message; no recovery is required.
Initialization with database synchronization is only available with the
NonStop(TM) RDF/IMP(X) product.
Cause You tried to initialize RDF with the SYNCHDBTIME option, but RDF/IMP or IMPX
is not installed.
Effect The INITIALIZE RDF command fails.
Recovery If you want to perform online database synchronization, RDF/IMP or IMPX must
be installed on both the primary and backup systems.
INITIALIZE RDF aborted
Cause This message follows a previous error message that indicates why the INITIALIZE
RDF command failed.
Effect RDF is not initialized.
Recovery Examine the error message immediately preceding this one, correct the condition
reported, and reenter the INITIALIZE RDF command.
Internal consistency error on Network records
Cause RDFCOM has detected an internal error that indicates inconsistency.
Effect The configuration command fails.
Recovery Contact the Global Mission Critical Solution Center (GMCSC) or your service
provider.
Internal error encountered in imagetrail search
Cause The context of the remote image trail does not correspond to the information stored
in the local context.
Effect The COPYAUDIT command aborts.
Recovery There is no recovery for this problem. Contact your local HP representative.
Invalid TMF shutdown timestamp
Cause You entered an INITIALIZE RDF timestamp command, but specified the timestamp
(or one or more of its components) incorrectly.
Effect RDF is not initialized.
428 Messages