RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

Recovery Examine the specified timestamp. If the format is correct, then the error arises from
an incorrect value for the date or time, such as 30 for hour or 32 for day. Correct the specified
timestamp and reenter the INITIALIZE RDF command.
The correct format for the timestamp is day month year hour:min, where:
day
is a number from 1 to 31.
month
is the first three letters of the month, such as JAN, FEB, MAR.
year
is a two-digit or four-digit number, such as 91 or 1991. Any year greater than 1999 must
be specified in four digits.
hour
is a number from 0 to 23.
min
is a number from 00 to 59. min must be preceded by a colon (:).
Library Conflict
Cause A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect The START RDF or TAKEOVER operation is aborted.
Recovery If possible, correct the error and reenter the command that encountered the error.
Otherwise, see your system manager.
Library File Error: error#
error#
is the NEWPROCESS error number that identifies the specific error.
Cause A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect The START RDF or TAKEOVER operation is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting process errors, see the Guardian Procedure Errors
and Messages Manual. Correct the error and reenter the START RDF or TAKEOVER command.
Local image file filename is missing
filename
is the name of the image trail file.
Cause The COPYAUDIT command could not find the specific image file on the local image
trail, although this file should exist on disk.
Effect The COPYAUDIT command aborts.
Recovery There is no recovery for this problem. You must perform the database
synchronization without the help of RDFCOM.
Mapping string mapping-string is invalid in the MAPFILE filename
Expected * in the filename portion in subvolume-name
mapping-string
is the erroneous mapping string specified in the mapfile.
filename
is the name of the updater mapfile specified in the updater configuration.
subvolume-name
is the erroneous subvolume specified in the mapping string.
RDFCOM Messages 429