RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on local image file
error#
is the file-system error number that identifies the specific error.
Cause The COPYAUDIT command encountered the specified error while attempting to
position into a local image file on the local image trail.
Effect The COPYAUDIT command aborts.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on new image file filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the image trail file associated with the error.
Cause The COPYAUDIT command encountered the specified error while attempting to
position into the specified image file on the local image trail volume.
Effect The COPYAUDIT command aborts.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on remote image file
error#
is the file-system error number that identifies the specific error.
Cause The COPYAUDIT command encountered the specified error while attempting to
position into a remote image file on the remote image trail.
Effect The COPYAUDIT command aborts.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Primary node in network master record is incorrect primary-system
primary-system
is an RDF system name.
Cause The network master network record does not have the specified primary system
name.
Effect Validation fails.
Recovery You must reconfigure your network master.
PRIMARYSYSTEM (\node) and BACKUPSYSTEM (\node) are the same
node
is the name assigned to both the primary and backup nodes.
436 Messages