RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

Effect Validation fails.
Recovery You must reconfigure your network master and possibly your local configuration.
RDFVOLUME is not allowed for an aux receiver. Auxiliary receivers do
not have an RDFVOLUME.
Cause You tried to add an auxiliary receiver for which you had specified an RDFVOLUME.
Effect The ADD command fails.
Recovery Issue a RESET RECEIVER command, and then reconfigure the particular receiver
without specifying an RDFVOLUME.
Read error error# on file remote-config-file
error#
is the file-system error number that identifies the specific error.
remote-config-file
is the name of the remote configuration file.
Cause The COPYAUDIT command encountered the specified error while attempting to read
the remote configuration file.
Effect The COPYAUDIT command aborts.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the underlying error and reenter the COPYAUDIT
command. Otherwise, contact your service provider.
Read error error# on remote image file
error#
is the file-system error number that identifies the specific error.
Cause The COPYAUDIT command encountered the specified error while attempting to read
data from a remote image file on the remote image trail.
Effect The COPYAUDIT command aborts.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the underlying error and reenter the COPYAUDIT
command. Otherwise, see your service provider.
Read error error# on remote ZFILEINC file
error#
is the file-system error number that identifies the specific error.
Cause The COPYAUDIT command encountered the specified error while attempting to read
data from the remote ZFILEINC file.
Effect The COPYAUDIT command aborts.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the underlying error and reenter the COPYAUDIT
command. Otherwise, contact your service provider.
RECEIVER RDFVOL error error# on allocation
error#
is a file-system error number that indicates lack of storage space on disk.
Cause During execution of a START RDF command, RDFCOM determined that sufficient
disk storage for image files did not exist.
440 Messages