RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

to disk. Alternatively, you can use a different TMF shutdown point that is located in a MAT
file still on disk, or you can stop TMF and use that resulting shutdown point.
START RDF Aborted
Cause A START RDF command aborted.
Effect The command fails.
Recovery Scan the EMS event log to determine why the command aborted, correct the error
if possible, and reenter the START RDF command.
START UPDATE in progress, Please Wait...
Cause A START UPDATE command is being executed.
Effect The start operation continues for the updater process.
Recovery This is an informational message; no recovery is required.
Starting RDF, Please Wait...
Cause A START RDF command is being executed.
Effect The start operation continues for RDF.
Recovery This is an informational message; no recovery is required.
STATUS RDF (\primary-> \backup) is NOT running
primary
is the name of the primary node in the RDF configuration.
backup
is the name of the backup node in the RDF configuration.
Cause A STATUS RDF command was issued while RDF was not running.
Effect The command fails.
Recovery Enter another command, or wait until RDF is started and then reenter the STATUS
RDF command.
STOP SYNCH command is aborted.
Cause You are attempting to execute the RDFCOM STOP SYNCH command, but either the
RDF product is not running or another critical operation is already in progress.
Effect The RDFCOM STOP SYNCH command aborts.
Recovery Correct the situation and then reissue the command.
STOP SYNCH command is aborted because database synchronization is not
in progress.
Cause You are attempting to execute an RDFCOM STOP SYNCH command, but online
database synchronization is not in progress.
Effect The RDFCOM STOP SYNCH command aborts.
Recovery You can only execute the STOP SYNCH command if the RDF product is currently
involved in online database synchronization. Because the RDF product is not involved in a
database synchronization, this is an informational message; no recovery is required.
STOP UPDATE in progress, Please Wait...
Cause A STOP UPDATE command is being executed.
Effect The stop operation continues for the updater process.
Recovery This is an informational message; no recovery is required.
STOP UPDATE request could not be completed
Cause You entered a STOP UPDATE command, but the monitor could not send stop messages
to all updater processes and has logged RDF error 841 to the EMS event log.
RDFCOM Messages 445