RDF System Management Manual for H-Series and J-Series RVUs (RDF 1.9)

Recovery Delete the updater, and then delete the image trail.
VOLUME vol-name does not match imagetrail ATINDEX atindex
Cause You added an updater with the specified ATINDEX, but the IMAGEVOLUME
configured for the updater does not have that value.
Effect The validation fails.
Recovery Alter the particular updater’s ATINDEX value to match the appropriate audit trail
number or delete the updater.
VOLUME vol-name is NOT audited to ATINDEX atindex
Cause You added an updater with the specified ATINDEX, but the primary system data
volume to be protected is not mapped to the audit trail with that audit trail number.
Effect The validation fails.
Recovery Alter the particular updater’s ATINDEX value to match the appropriate audit trail
number or delete the updater.
VOLUME volume UPDATEVOLUME does NOT exist
volume
is the volume on the primary node for which the updater is responsible.
Cause The RDF configuration file is invalid.
Effect RDF will not start.
Recovery Bring the volume up, or delete it from the RDF configuration.
VOLUME volume record NOT found
volume
is the volume on the primary node for which the updater is responsible.
Cause The INFO command could not find an updater record for volume in the configuration
file.
Effect The command fails.
Recovery Alter the configuration to include the updater process.
WARNING - BACKUPSWAP parameter has no effect, KMSF swap volume takes
precedence
Cause The user attempted to SET or ALTER the RDF BACKUPSWAP parameter.
Effect This parameter no longer has any effect. The KMSF subsystem controls the placement
of the RDF processes’ swap files.
Recovery This is an informational message; no recovery is required.
*** Warning *** FASTUPDATEMODE is already OFF.
Cause You have tried to turn FASTUPDATEMODE OFF for a Receiver when it was already
OFF.
Effect The command is ignored.
Recovery This is an informational message; no recovery is required.
*** Warning *** FASTUPDATEMODE is already ON.
Cause You have tried to turn FASTUPDATEMODE ON for a Receiver when it was already
ON.
Effect The command is ignored.
Recovery This is an informational message; no recovery is required.
WARNING: No backup cpu has been configured for the procname
456 Messages