RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Recovery
You must remove the node name for the extractor from your SCF script.
22
Open error errnum on RDF master extractor procname with ATINDEX indexnum.
errnum
is a file-system error number.
procname
is the name of an extractor process.
indexnum
is the audit trail index number of the specified extractor.
Cause
The specified error was returned when the lockstep gateway attempted to open the RDF extractor.
Effect
The gateway continues trying to open the extractor and will repeat this message every five
minutes until the open is successful.
Recovery
This is an informational message. If you want lockstep operations to resume, and if your RDF
subsystem is not currently running, you must restart the subsystem.
23
Position error errnum returned when attempting to position in lockstep
file filename for RDF extractor procname with ATINDEX indexnum.
errnum
is a file-system error number.
filename
is the name of a lockstep file.
procname
is the name of an extractor process.
indexnum
is the audit trail index number of the specified extractor.
Cause
The specified error was returned when the lockstep gateway attempted to position into the
lockstep file.
Effect
The lockstep gateway stops.
Recovery
SCF automatically restarts the gateway. If the problem persists and the autorestart count is
exhausted, correct the condition that caused the error and then restart the gateway.
24
Error errnum returned when attempting to lock the lockstep file filename
for RDF extractor procname with ATINDEX indexnum.
errnum
is a file-system error number.
312 Process-Lockstep Operation