RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Recovery
You must execute the RDF TAKEOVER operation on both backup systems before you can use
the COPYAUDIT command of the triple contingency protocol.
An RDF TAKEOVER has completed
Cause
The operator issued a TAKEOVER command at the backup node and the TAKEOVER operation
has completed.
Effect
The backup database becomes the database of record.
Recovery
This is an informational message; no recovery is required.
At least one non network master NETWORK record required
Cause
No non network master NETWORK record was found when validating this network master
subsystem.
Effect
RDF does not start.
Recovery
Add one or more network records to the configuration describing the non network master
subsystem(s).
Audit is missing. Contact your HP analyst.
Cause
The COPYAUDIT command could not find audit that should exist in the local image trail.
Effect
The COPYAUDIT command aborts.
Recovery
There might be no recovery for this problem. To verify that required audit is missing from your
local image trail, contact your local HP analyst.
Aux audit support is only available with the RDF/IMPX product
Cause
You tried to have RDF/IMP protect a data volume associated with an auxiliary audit trail.
Effect
The SET or ADD command fails.
Recovery
RDF/IMPX must be installed do this.
Aux audit trail not found with index num
Cause
You tried to add an RDF object with an ATINDEX that does not correspond to the audit trail
number of a configured auxiliary audit trail.
Effect
The ADD command fails.
Recovery
Review and revise your RDF and TMF configurations.
Aux RECEIVER Record does not exist for atindex num
422 Messages