RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Messages Manual. If possible, correct the error and reenter the command that encountered the
error. Otherwise, see your system manager.
Couldn't create or clear the PRIMARYSYSTEM CONTEXT (error#)
error#
is the file-system error number that identifies the specific error.
Cause
The context file data cannot be created or cleared while START RDF processing is performed
after INITIALIZE RDF.
Effect
START RDF processing is aborted.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the command that encountered the
error. Otherwise, see your system manager.
Couldn't OPEN the started process: error#
error#
is the error number that identifies the specific error.
Cause
An open error occurred during START RDF or STOP RDF command processing.
Effect
The START RDF or STOP RDF operation is aborted.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting process errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the command that encountered the
error. Otherwise, see your system manager.
Couldn't WRITE startup to the started process error#
error#
is the error number that identifies the specific error.
Cause
A write error occurred during START RDF or STOP RDF command processing.
Effect
The operation is aborted.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting process errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the command that encountered the
error. Otherwise, see your system manager.
cpu:cpu CPUS are NOT available
cpu:cpu
are the primary and backup CPUs, respectively.
Cause
Both the configured primary and backup CPUs were unavailable when a START RDF command
was issued.
RDFCOM Messages 425