RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

filename
is the name of the image trail file associated with the error.
Cause
The COPYAUDIT command encountered the specified error while attempting to create the
specified image file on the local image trail volume.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, see your system manager.
Error error# on filename while cleaning the control subvolume on the
local system.
error#
is the file-system error number that identifies the specific error.
filename
is the name of the local control subvolume file associated with the error.
Cause
The INITIALIZE RDF command encountered the specified error while attempting to purge the
local control subvolume files.
Effect
The INITIALIZE RDF command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. Correct the error and reenter the INITIALIZE RDF command. If the problem
persists, contact your system manager.
Error error# on filename while cleaning the control subvolume on the
remote system.
error#
is the file-system error number that identifies the specific error.
filename
is the name of the remote control subvolume file associated with the error.
Cause
The INITIALIZE RDF command encountered the specified error while attempting to purge the
remote control subvolume files.
Effect
The INITIALIZE RDF command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. Correct the error and reenter the INITIALIZE RDF command. If the problem
persists, contact your system manager.
Error error# on PURGEDATA for the MAPLOG file filename
error#
is the file-system error number that identifies the specific error.
430 Messages