RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Messages Manual. Take appropriate corrective action, and then reissue the COPYAUDIT
command.
Error error# on setmode for large transfers
error#
is the file-system error number that identifies the specific error.
Cause
The COPYAUDIT command encountered the specified error while attempting to perform a SET
MODE operation to enable large transfers of data.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. Take appropriate corrective action, and then reissue the COPYAUDIT
command.
Error error# while communicating with Updaters
error#
is the error number returned by the communication procedure.
Cause
During execution of a LIST UPDATERFILEOPENS command, RDFCOM determined that the
communication, with the Updaters on the backup system, for obtaining the Updater file open
statistics failed with the specified error.
Effect
LIST UPDATERFILEOPENS command fails.
Recovery
See the Guardian Procedure Errors and Messages Manual for a description of the recovery
actions for the file-system error. Correct the error indicated by error#, then reenter the command.
Error in the MAPFILE filename
filename
is the name of the updater mapfile specified in the updater configuration.
Cause
During execution of a VALIDATE CONFIGURATION command, RDFCOM determined that the
updater mapfile is invalid.
Effect
The command fails.
Recovery
Correct the mapfile and reenter the command.
Expected MAP in the mapping string mapping-string in the MAPFILE filename
mapping-string
is the erroneous mapping string specified in the mapfile.
filename
is the name of the updater mapfile specified in the updater configuration.
Cause
RDFCOM found that the mapping string specified in the updater mapfile did not contain the
keyword MAP when an ADD VOLUME, ALTER VOLUME, START RDF, START UPDATE, or
VALIDATE CONFIGURATION command was being executed.
432 Messages